Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Solid Rocket Technology》 2001-02
Add to Favorite Get Latest Update

Application of Acousto-Ultrasonic Nondestructive Evaluation for Interlaminar Bond Quality in Filament-Wound Fiber Reinforced Composites

LIU Zhen qing (Institute of Acoustics,Tongji University,Shanghai 200092,China)  
The paper introduces the application of acousto ultrasonics to damage asessment of composites.The longitudinal wave resonance produced by acousto ultrasonic signal in the thickness of the specimen makes the frequency spectrum energy concentrated nearby some frequency spot.Acoustic wave is send from the sending transducer to the receiver transducer in the form of shear waves.The peak position of the acousto ultrasonic spectrum is used for nondestructive evaluation of interlaminar bond quality in filament wound fiber reinforced composites.The experimental results show that the parameter is sensitive to debonding and kissing bond in fiber reinforced composites.
【Fund】: 国家自然科学基金与国家教委跨世纪优秀人才培养计划基金资助课题
【CateGory Index】: TB33
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 AI Chun-an,LIU Yu,CAI Kun(The Second Artillery Engineering College,Xi'an 710025,China);Acousto-ultrasonic detection for interface defect between case and insulation of SRM[J];Journal of Solid Rocket Technology;2009-01
2 SHI Jian-bin (Department of Material Engineering,Heilongjiang Institute of Technology ,Harbin150050,China);Influence of Ultrasonic Technique to the Interface Property in the Aramid Fiber[J];Journal of Heilongjiang Institute of Technology;2002-04
3 CHANG Xin-Long,NI Tao,AI Chun-An(The Second Artillery Project Institute,Xi'an 710025,China);Acousto-Ultrasonic Testing Techniques[J];Nondestructive Testing;2009-05
4 XU Yong-chao,DONG En-sheng(Department of Aviation Control and Engineering,Aviation University of Air Force,Changchun 130022,China);The detection technology for damages of composite components on military aircraft[J];Journal of China University of Metrology;2009-01
【Citations】
Chinese Journal Full-text Database 3 Hits
1 LIU Zhenqing HUANG Ruiju (Institute of Acoustics, Tongji University Shanghai 200092);Experimental analysis of acousto-ultrasonic wave propagation mode in thin plate[J];声学学报(英文版);2000-03
2 Liu Zhenqing(Institute of Acoustics, Tongji University);ULTRASONIC LAMB WAVES IN NONDESTRUCTIVE TESTING[J];Nondestructive Testing;1999-09
3 Xie Yuanxia Liu Zhenqing Huang Ruiju (Institute of Acoustics, Tongji University);ANALYSIS OF ULTRASONIC WAVES IN PLATES BY GEOMETRICAL ULTRASONICS AND ITS APPLICATIONS[J];Nondestructive Testing;1999-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 QIN Chun-ming(School of Electronics Information Engineering,Nanchang Hangkong University,Nanchang 330069,China);Impact localization in an aircraft tank based on propagator method[J];Transducer and Microsystem Technologies;2010-04
2 SU Yongzhen,YUAN Shenfang,Wang Yu(The Aeronautic Key Laboratory for Smart Material and Structures and Astronautics,Nanjing University of Aeronautic,Nanjing 210016,China);Impact localization in composite using multiple signal classification method[J];Acta Materiae Compositae Sinica;2010-03
3 WANG Yong-shun1,ZHOU Xing-san2(1.Dept.of Basic Science Subjects,PLA Zhenjiang Ships University,Zhenjiang 212003,China;2.Teaching & Research Office of Culture,Jiangsu Advanced Vocational School of Police Officers,Zhenjiang 212003,China);Experimental Study on Ultrasonic Guided Wave Excited by Pulsed Laser in Metal Wedge[J];Journal of Huaihai Institute of Technology(Natural Science Edition);2011-03
4 ;Mode Selection for Detecting Disbonding in Steel/Rubber Adhesive Bonding Structure by Using Lamb Wave[J];Aeronautical Manufacturing Technology;2009-05
5 GAO Guang-jian,DENG Ming-xi(Dept.of Foundation Studies,LEU,Chongqing 401311,China);Numerical Simulation Research on Ultrasonic Lamb Wave Propagation in the Bottom Plate of Oil Tank[J];Journal of Logistical Engineering University;2011-05
6 CAO Zheng-min,LIN Li,LI Xi-meng(Nondestructive Testing & Evaluation Laboratory,Dalian University of Technology,Dalian 116024,China);PLOTTING AND EXPERIMENTAL VALIDATION OF LAMB WAVE DISPERSION CURVE[J];Physical Testing and Chemical Analysis(Part A:Physical Testing);2008-09
7 He Cunfu; Wu Bin; Fan Jinwei College of Mechanical Engineering & Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China;ADVANCES IN ULTRASONIC CYLINDRICAL GUIDED WAVES TECHNIQUES AND THEIR APPLICATIONS[J];Advances In Mechanics;2001-02
8 Zhang Xunya;Jiang Xiaomei;Lü Bin;Yin Yafang;Research Institute of Wood Industry,CAF;;Evaluation of Bending Properties of Larch Dimension Lumber with Acousto-Ultrasonic Technique[J];Scientia Silvae Sinicae;2014-10
9 ZHANG Lu-gen(The Inspection & Research Institute of Boiler & Pressure Vessel of Jiangxi Province,Nanchang 330029,China);Lamb Waves Testing on Stainless Steel Thin-Wall Tubes of the Condensers[J];Failure Analysis and Prevention;2010-01
10 LIU Zhen qing, TA De an (Institute of Acoustics, Tongji University, Shanghai 200092, China);Mode identify of Lamb wave by means of 2-D FFT[J];Technical Acoustics;2000-04
China Proceedings of conference Full-text Database 3 Hits
1 Tao Xuerong Chen Xianfeng (National Center of Boiler & Pressure Vessel Inspection & Research Beijing 100013) liu Shifeng Wang Yong (Department of Mechanical Engineering, Tsinghua University, Beijing 100084);ACOUSTO-ULTRASONICS——A NEW NDT TECHNIQUE OF COMOSITES[A];[C];2000
2 PEI Jun-feng DENG Ming-xi (Logistics Engineering University,Chongqing 400016,China);Influence of changes in the parameters of a solid plate on ultrasonic Lamb wave modes[A];[C];2007
3 Zhang Haifeng~1 Yan Shi~1 Meng Yanyu~(1,2,3) (1.School of Civil Engineering,Shenyang Jianzhu University,Shenyang 110168,China;2.School of Hydraulic and Civil Engineering,Dalian University of Technology,Dalian 116024,China; 3.School of Transportation and Building Engineering,Beihua University,Jilin,132013,China);Experimental research on damage detection of metal plate using Lamb wave[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Zhang Yinsheng, You Yusheng, Liu Yuanjun, Ji Kejian, Den Weihua, Yan Kejian (Institute 53, Ordnance Industry of China, Jinan 250031);STUDY ON THE TEST METHODS ABOUT THE QUALITY CONTROL OF EPOXY RESIN/ARAMID FIBER PREPREG[J];Engineering Plastics Application;2000-06
2 Zeng Jinfang Qiao Shengru * Qiu Zheming (43rd lnstitute,4th Academy of CASC) (*Northwestem PolytechnicaI University);F-12 ARAMID FIBER AND COMPOSITES[J];FIBER REINFORCED PLASTICS/COMPOSITE;1999-04
3 Lu Rong lin Fei Yunpeng Bai Baoquan (Dep.of Eng.Mech.And Tech.,Tongji.Uni.)(Shanghai Material Institute);MICROWAVE DETECTION PRINCIPLE AND APPLICATION IN COMPOSITES[J];Fiber Reinforced Plastics/composite;2001-02
4 Wang Qiuxia (National Research Center for Non-mentalic Mining Resource Overall Utilization Engineering Technology);WORLD AND CHINESE COMPOSITE STATUS AND DEVELOPPING TREND[J];FIBER REINFORCED PLASTICS/COMPOSITE;1999-01
5 Deng Mingxi(The Logistics Engineering College);Research on Lamb Wave Liquid Level Measurement[J];JOURNAL OF TRANSDUCER TECHNOLOGY;1995-02
6 XU Li ZHANG Xinghong HAN Jiecai (Center for Composite Materials and Structure,Harbin Institute of Technology,Harbin 150001);Review of NDE of Composite Materials in Aerospace Fields[J];Materials Review;2005-08
7 Meng Dawei; Zhang Hong(Harbin University of Science and Technology) (Beijing Institute of Technology);Application of Mixed Optimization Strategy to Electric Machine Design Using Simulated Annealing and Direct Search Techniques[J];ELECTRIC MACHINES AND CONTROL;1997-02
8 LI Junjie,HAN Yan,WANG Liming(National Key Laboratory for Electronic Measurement Technology,North University of China,Taiyuan 030051,China);Study on X-ray Inspection for Composite Materials[J];Journal of Projectiles,Rockets,Missiles and Guidance;2008-02
9 MI Jian - hua (China Electricity Council, Beijing 100761,China);Analysis on Energy Saving Condition in China Power Industry[J];Electrical Equipment;2005-06
10 Wen Jinyu, Liu Pei, Cheng Shijie (Huazhong University of Science and Technology, 430074, Wuhan, China);GENETIC ALGORITHM AND ITS APPLICATIONS TO POWER SYSTEMS[J];AUTOMATION OF ELECTRIC POWER SYSTEMS;1996-10
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Shuhui~1,LIANG Guozheng~1,HUI Xiangwen~1,ZHANG Wei~2,ZENG Jinfang~2(1 Department of Applied Chemistry,School of Sciences,Northwestern Polytechnical University,Xi'an 710072; 2 Xi'an Aerospace Composites Research Institute,Xi'an 710025);Methods of Improvement in the Interfacial Properties of F-12 Fiber/Epoxy Resin Matrix[J];Materials Review;2006-10
2 XIANG Hong-bing,HU Zu-ming,CHEN Lei(State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,Donghua University,Shanghai,201620,China);Progress in Modification of Aramid Fibers[J];Chinese Polymer Bulletin;2008-09
3 LIAO Ying-fang; SHEN Ming-xia; JIANG Lin-hua (Department of Materials Science and Engineering Hohai University, Nanjing 210098 China);Methods for improving adhesive properties of aramid-rubber[J];Hi-tech Fiber & Application;2005-03
4 GUO Qing-zhong1,LIU Tie-min2,ZHENG Yuan-suo3(1.Shaanxi foundation architecture engineering company,Xi'an 710001 China;2.School of materials scienceand engineering,Xi'an University of architecture & technology,Xi'an 710001 China;3.School of science,Xi'an Jiaotong University,Xi'an 710049 China.);Progress of Study on Aramid Fiber Surface Modification[J];Hi-Tech Fiber & Application;2011-03
5 LI Lu,XIONG Lian-ming,QIN Yi,CAO Duan-qing,ZENG Lin-hui(Nanchang Hang Kong University,Environment & Chemical College,Nanchang 330063,China);Discussion in adhesion between rubber and fiber materials[J];China Adhesives;2007-08
6 AI Chun-an,ZENG Yi-ping,LI Jian,XU Zhi-gao,PENG Jiong(The Second Artillery Engineering College,Xi'an 710025);Debonding defect identification method of SRM composite shell based on the power spectral centroid of SWF[J];Journal of Solid Rocket Technology;2012-06
7 JIANG Nian;WANG Zhao-ba;JIN Yong;CHEN You-xing;School of Information and Communication Engineering,North University of China;;Measurement of Interface Bond Quality of Composite Structure Using Nonlinear Ultrasound[J];Acta Armamentarii;2014-03
8 YU Bo (Technical Center of Yizheng Chemical Fiber Co. Ltd., Yizheng Jiangsu 211900, China);Progress in production and application of p-aramid fibers(Ⅲ)[J];Synthetic Technology and Application;2005-04
9 LIU Ke-jie,YANG Wen-liang,PENG Tao,WANG Feng-de(High Performance Fiber Section,R & D Center,China Bluestar Chengrand Chemical Industry Institue,Chengdu 610041,Sichuan,China);Progress in Surface Modification of Aramid Fiber——Physical Modification[J];Synthetic Fiber in China;2011-06
10 YU Chun-hua1,QI Xing-lin1,REN Liang-liang1,2(1.Department of Ammunition Engineering,Ordnance Engineering College,Shijiazhuang 050003,China; 2.66352 Troops of PLA,Beijing 101518,China);Review of signal processing methods used in ultrasonic detection of multilayer metal-rubber adhesive joint[J];Information Technology;2011-08
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Liu Zhenqing(Institute of Acoustics, Tongji University, Shanghai);GUIDED WAVES IN ULTRASONIC NONDESTRUCTIVE TESTING[J];Nonde Structive Testing;1999-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved