Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2008-08
Add to Favorite Get Latest Update

Cutting Properties in Cutting Austempered Ductile Iron by PCBN Compact Tools

ZHANG Hong-tao,LI Hai-bo,DONG Hai,LI Man(Dalian University of Technology,Dalian 116024,China)  
Four kinds of polycrystalline cubic boron nitride(PCBN) compact tools were used to cut the austempered ductile iron(ADI) in the experiment for the purpose of getting the curves of cutting force,friction force and friction coefficient with the change of cutting speed.The results indicated that the friction force and friction coefficient of low-content CBN compact were smaller than those of high-content CBN compact and those of the ceramic binder compact were smaller than those of the metallic binder compact.Besides,the PCBN tools with massive Al in the binders,are disadvantageous to cutt ADI,since the friction force and friction coefficient will unceasingly increase along with the speeding up of the cutting.
【CateGory Index】: TG711
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 Li Yubiao Li Man Zhang Hongtao Ren Shuaimin(School of Mechanical Engineering,Dalian University of Technology,Dalian 116023,China);Research on cutting force and tool life during interrupted dry-cutting ADI using PCBN tools[J];Diamond & Abrasives Engineering;2010-01
2 Wang Chihong,Guo Xuhong,Wang Wei (School of Mechanical and Electrical Engineering,Suzhou University,Suzhou 215021,China);Study on the Influence of Cutting Parameters on Cutting Force of Austempered Ductile Iron[J];Journal of Suzhou University(Engineering Science Edition);2010-01
3 SUN Guo-yuan1,LIU Chao-feng2,YANG Li1(1.School of Mechanical Engineering,North China University of Water Conservancy and Electric Power,Zhengzhou 450008,China;2.Zhengzhou University of Light Industry,Henan Provincial Key Laboratory of Surface & Interface Science, Zhengzhou 450002,China);Composite Tools and Coating Tools for Cutting Casting Iron[J];Foundry Technology;2009-09
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Guo Xuhong et al;Study on Machinability of Austenite-bainite ductile Irons[J];TOOL ENGINEERING;1996-11
2 GUO Xu-hong,RUI Yan-nian,ZHU Sheng-ling,DONG Gui-yan(Mechanical and Electronic Engineering College of Soochow University,Suzhou 215021,China);Study on Ceramic Cutter's Wear Mechanism When Dry Cutting Austempered Ductile Iron(ADI)[J];Tribology;2006-01
3 WEI Jia-xin,LIN Feng,FENG Ji-fu(Guilin Research Institute of Geology for Mineral Resources,Guilin,Guangxi 541004,China);Technological factors influencing wear resistance of PCBN[J];Superhard Material Engineering;2006-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Li-juan,HUANG Wei(School of Mechanical Engineering and Automation,Anshan University of Science and Technology,Anshan 114044,China);Experimental investigation on deformationof a T-shape cross-sectional casting[J];Journal of Anshan University of Science and Technology;2004-05
2 Gao Hui(Beijing Vocational & Technical Institute of Industry,Beijing 100042,China);Application and Developing Tendency of Cutting Tool's Material in Course of Machining[J];Journal of Beijing Vocational & Technical Institute of Industry;2006-01
3 TAN Ye-fa1,ZHOU Zhao-xia1,4,YU Ai-bing2,CAI Wen-li3,TAN Hua1,WANG Xiao-long1 (1.Department of Mechanical Engineering,PLA University of Science and Technology,Nanjing 210007,Jiangsu,China;2.Faculty of Engineering,Ningbo University,Ningbo 315211,Zhejiang,China;3.Design Institute of Engineering Science and Research,Guangzhou 510515,Guangdong,China;4.Commanding Institute of Engineer Corps,Xuzhou 221004,Jiangsu,China);Tribological Behaviour and Mechanism of Zirconia Toughened Mullite Composite Ceramic at Elevated Temperatures[J];Acta Armamentarii;2008-11
4 CHEN En-ping 1.College of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China;Studies on empirical formula of cutting force[J];Journal of Yanshan University;2004-04
5 Ma Yong (Dalian University of Technology);The Optimal Way to Increase Grinding Precision of Cutting Edge of Non-zero Orthogonal Rake[J];Dandong Textile College;2000-02
6 WU Jie-ming (Wuyang-Honda Motors (Guangzhou) Co. Ltd. ,Guangzhou510260,China);Cause Analysis of Surface Burning of Cam Grinding and Ways of Elimination[J];Journal of Shanghai Institute & Electric Power;2004-01
7 ;A Study on Two Advanced Cutting Tools[J];JOURNAL OF EZHOU UNIVERSITY;2000-02
8 LIU Zhaojing, LI Fengzhen, YAO Xiurong, ZHANG Deming, REN Shanzhi(Material Science & Engineering College, Harbin University of Science & Technology, Harbin 150080, China);SECONDARY-WORKING CHARACTER OF IN SITU TiC_P/Fe COMPOSITES[J];Acta Materiae Compositae Sinica;2004-02
9 Ma Guangfeng Zhao Shuguo Zhi Suyan (Mechanical Engineering Institute,Liaoning Technical University,Fuxin,China);Discussion of the Conducting and Scattering of Cutting Heat During Cutting Process[J];;1997-05
10 Yuan Dajun,Hu Xianpeng,Li Xinggao,Sun Li Engineering Research Center of Tunnel and Underground Engineering,Beijing Jiaotong University,Ministry of Education,100044,Beijing,China;Abrasion Characteristics of Shield Cutters in Sandy Cobble Stratum[J];Urban Mass Transit;2009-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Tang Ying;Gu Chongxian;Sun Rongping;Chen Kexing(College of Mechanical Engineering,USTB,Beijing 100083,PRC)(Department of Mechanical Engineering,Xi'an Jiaotong University);Acoustic Emission Mechanism in Cutting Process[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1995-05
2 ;Wavelet Theory And Recent Advances In the Field of Signal Processing For Acoustic Emission (AE)[J];Sensor World;2006-09
3 LI Hua 1 ,XU Chun-guang 1 ,XIAO Ding-guo 1 ,HUANG Hui 1 ,ZHENG Jun 1 ,JI Wan-dong 2 ,GUO Hao 2 (1.Mechanical Engineering and Automatization College, Beijing Science and Technology University, Beijing 100081,China; 2.Tangshan;Sound Emission Check Technique for Rolling Bearing[J];Bearing;2002-07
4 LI Hongnan1,SUN Hongmin2(1.Dalian University of Technology,Dalian 116024,China;2.Shenyang Architectural and Civil Engineering Institute,Shenyang 110015,China);Damage diagnosis of framework structure based on wavelet packet analysis and neural network[J];Earthquake Engineering and Engineering Vibration;2003-05
5 Zhao Hong Meng Qingxin Xiao Bo et al;Developing Tendency of Magnesium Alloy Application and Main Point of Cutting Machining[J];Tool Engineering;2005-06
6 Xu Liqiang Hou Zhigang Huang Chuanzhen et al;Study on Micron/Nanometer Ti(C,N) Based Cermet Tool Materials[J];Tool Engineering;2007-09
7 Wu Shaohua Shi Gaolian Guo Xuhong et al;Research on the Surface Roughness of Austempering Ductile Iron (ADI) by High Speed Dry Cutting of Ceramic Cutter[J];Tool Engineering;2008-04
8 ZHENG Long-bin ;GHEN Yi; GONG Zheng-chun; ZHANG Bai-kang ;SUN Guang-hai LIU Chan-jun; FU Wei-jie;Production Study of Austempering Ductile Iron[J];Boiler Manufacturing;2000-03
9 Zhang Hui1,Ma Yuejin1,Hao Jianjun1,Chen Zhiqiang2(1.Agricultural University of Hebei,Baoding 071001,Hebei,China;2.Zhonghang Huiteng Windpower Equipment Co.,Ltd,Baoding 071001,Heibei,China);WC coating deposited by electric spark process on high speed steel[J];Welding & Joining;2008-08
10 MA Li-xin 1, WANG Yang 2, XIE Da-gang 2, YANG Li-jun 2, LIU Xuan 2 (1. School of Light Industry, Harbin University of Commerce, Harbin 150076, China; 2. School of Mechatronic, Harbin Institute of Technology, Harbin 150001, China);Laser assisted hot machining of cold-hard cast iron[J];Journal of Harbin Institute of Technology;2002-02
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 LI Deng-wan,CHEN Hong-tao,GAN Jian-shui,XU Ming-heng,HUANG Sui(Institute of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China);Test study on cutting force in titanium alloy machining[J];Journal of Guangxi University(Natural Science Edition);2010-05
2 Li Dengwan1,2 Chen Hongtao1,2 Xu Mingheng1 Zhong Chengming3 1.Southwest Jiaotong University,Chengdu,610031 2.Sichuan Engineering Technical College,Deyang,Sichuan,618000 3.Dongfang Turbine Co.,Ltd.,Deyang,Sichuan,618000;Experimental Study on Clean Machining of Titanium Alloy Based on Uniform Design Method[J];China Mechanical Engineering;2011-01
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 Liu Yibo;Tu Houze;Chen Qingshou;A ABSTRACT ON POLYCRYSTALLINE CUBIC BORON NITRIDE CUTTER AND ITS MANUFACTURING TECHNOLOGY[J];GEOLOGY AND PROSPECTING;1996-04
2 Guo Xuhong et al;An Experimental Study of the Surface Quality of Austenite-bainite Ductile Cast Irons(ADI)[J];Tool Engineering;1997-02
3 Guo Xuhong(Suzhou Institute of Silk Textile Technology, Suzhou Jiangsu 215005,PRC)Chen Chenzhou(South China University of Technology, Guangzhou Guangdong 510641,PRC)Liu Jun (Dongfeng Motor Corporation, Shiyan Hubei 442000,PRC);Study on the Cutting Mechanism of Austenite-Bainite Ductile Cast Irons (ADI)[J];Materials For Mechanical Engineering;1997-05
4 Wang Zehua(Mechanoelectronics College,Hehai University,213022 Changzhou,China);Development and application of austempered ductile iron[J];Locomotive & Rolling Stock Technology;2003-04
5 Deng Jianxin, Ai Xing, Feng Yihua (Shandong University);WEAR, LUBRICATION AND MATCHING OF CERAMIC CUTTING TOOLS WITH THE WORKPIECE MATERIALS[J];Chinese Journal of Mechanical Engineering;2002-04
6 LIU Zhanqiang, AI Xing(School of Mechanical Engineering, Shandong University, Jinan 250061, China);Wear Characteristics of Cutting Tools in High Speed Machining[J];Tribology;2002-06
7 DENG Jian-xin, ZHANG Xi-hua, LI Jian-feng, SUN Gao-zuo, CAO Tong-kun (Department of Mechanical Engineering, Shandong University, Jinan 250061, China);Friction and Wear Behavior of TiB_2 Reinforced Al_2O_3 Ceramic Cutting Tool in Dry Cutting of Hardened Steel at High Speed[J];Tribology;2004-03
8 Liu Yourong Liu Jiajun Zhu Baoliang(Tribology Research Institute Tsinghua University Beijing 100084 China);Wear Performance and Mechanism of Si_3N_4 Composite Ceramic Cutting Tool[J];TRIBOLOGY;1997-02
9 LIU Jin-cheng 1 ,SUN Guo-xiong 2 (1.Russel Co.,Bonchurch street,Leicester LES5EP U.K;2.Mechanical Engineering Department ,Dongnan University,Nanjin210096,China);Latest Progress of ADI Abroad[J];Modern Cast Iron;2003-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved