Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Nuclear Power Engineering》 2009-S2
Add to Favorite Get Latest Update

Casting Technique for Primary Coolant Piping for Pressurized Water Reactor Power Plant and Its Localization

LI Yuan-tai, ZHANG Chun-lai, LEI Zhong-li (China Nuclear Power Engineering Co. Ltd., Shenzhen, Guangdong, 518124, China)  
The required chemical content range of Primary Coolant Piping (Static cast elbow, centrifugally cast pipe) by Design and Construction Rules for Mechanical Components of PWR Nuclear Islands (RCCM) (French Norm) is wide. The result of manufacturing qualification test, which was performed by YANTAI TAIHAI MANOIR NUCLEAR EQUIPMENT CO. LTD. (THM), shows that qualification pieces satisfied the chemical requirement of RCCM may not satisfy its mechanical requirement. CNPEC/ECE together with THM analyzed the anticorrosion and strengthening mechanism of Material Z3CN2009M (French Brand) for Cast piece of 1000 MW PWR (CRP1000) Primary Coolant Piping through metallography methods. Strictly internal chemical control range of ladle analysis was established and it makes the mechanical property of cast piece of CPR1000 PWR Primary coolant piping satisfy the RCCM requirement without losing the anti-corrosion property and weld ability. The mechanical test value obtained has rich margin, little degree of separation and exhibits stable quality and advanced overall properties. This success solved the preliminary requirement for domestic making of Primary Coolant Piping of NINGDE and YANGJIANG Nuclear Power Plant and finally realized the domestic manufacturing of Primary Coolant Piping cast piece for CRP1000 Nuclear Power Plant.
【CateGory Index】: TL353
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 JI Xiao-xia1),WANG Gen-qi2),YANG Bin1),WANG Xi-tao1) 1) State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China 2) Yantai Taihai Marnoir Nuclear Equipment Co.Ltd.,Yantai 264003,China;Casting technique optimization of the primary coolant bent pipes used for a pressurized water reactor nuclear power plant by ProCAST software[J];Journal of University of Science and Technology Beijing;2012-02
2 WANG Yongqiang,LI Shilei,YANG Bin,WANG Yanli,WANG Xitao(State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083);Research Status and Outlook on Thermal Aging of Cast Austenitic Stainless Steels Used in Primary Coolant Pipes of Nuclear Power Plant[J];Materials Review;2012-03
3 PAN Pinli,ZHONG Yuexian,MA Qingxian,YUAN Chaolong(Key Laboratory for Advanced Materials Processing Technology of Ministry of Education, Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China);Development of Manufacture Technology for Main Pipe of Large-sized Nuclear Power[J];China Metal Forming Equipment & Manufacturing Technology;2011-01
4 WANG Yong-qiang,YANG Bin,WU Huan-chun,HAN Jun,WANG Xi-tao;Uncovered the Truth of Nuclear Power Material——Materials of Primary Coolant Pipe in Nuclear Power Plants and Their Processing[J];Metal World;2013-01
Chinese Journal Full-text Database 10 Hits
1 WANG Guo-fan 1, ZHOU Ying-qin 2 (1.Dept. of Material Science and Engineering, Shandong Institute of Architectural Engineering, Ji'nan 250014, China;2.Material Institute, Shandong University, Ji'nan 250061, China);Formation cause and prevention of gas holes in stainless steel wirerope clamper castings produced by investment casting[J];Ordnance Material Science and Engineering;2002-02
2 ZOU Dening1,WANG Hongbo1,CHEN Zhiyu1,2,HAN Ying3,YU Junhui1(1.School of Metallurgy and Engineering,Xi′an University of Architecture and Technology,Xi′an 710055,China; 2.Fining Plant,Jinchuan Limited Company,Jinchang 737103,China;3.State Key Laboratory for Mechanical Behavior of Materials,Xi′an Jiaotong University,Xi′an 710049,China);GA-ANN based shear strength model for stainless steel clad sheets[J];Ordnance Material Science and Engineering;2011-06
3 Yu Haifeng~(1),Mao Huigang~1,Cui Peiyao~2,Xu Chaozhe~2(Stainless Steel Branch 1.Stainless Steel R & D Center;2.Manufacturing Management Department,Shanghai 200431,China);Formation Causes and Mechanism of "Punctuate" Defect on Surface of 410S Stainless Steel Strip[J];Baosteel Technology;2006-S1
4 Bi Hongyun1,Li Xin1,Ou Xiangbo2,Wu Yong2(1.Baosteel Research Institute,Shanghai 201900,China;2.Ningbo Baoxin Stainless Steel Co.,Ltd.,Ningbo,Zhejiang 315807,China);Development of Ferritic Stainless Steel for Low Temperature Parts in Automotive Exhaust System[J];Baosteel Technology;2007-04
5 Hu Jincheng1,Song Hongmei1,Yu Min2,Jiang Laizhu1(1.Baosteel Research Institute,Shanghai 201900,China;2.Stainless Steel Branch,Shanghai 200431,China);Thermo-calc Calculation and Experimental Research on Microstructure of 410S and 430 Ferritic Stainless Steels at High Temperature[J];Baosteel Technology;2007-04
6 MIAO Lede,ZHANG Yi and WU Junfei(Research Institute,Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900,China);The Progress on Quantitative Analysis of the Precipitated Phase in Stainless Steel[J];Baosteel Technology;2009-05
7 OU Xinzhe,SHAO Weidong,HAO Chuanlong and ZHANG Lihong(Special Steel Business Unit,Baoshan Iron & Steel Co.,Ltd.,Shanghai 200940,China);Influence of Ageing on the Microstructure and Low-temperature Impact Toughness of 00Cr27Ni31MoCu Alloy[J];Baosteel Technology;2010-03
8 ZHANG Wei and JIANG Laizhu(Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 200431,China);Effect of alloying elements on pitting corrosion resistance of the 2101 duplex stainless steels[J];Baosteel Technology;2011-05
9 ZHANG Zhonghua,YANG Jianqiang,ZHANG Chunxia,SHAO Weidong and OU Xinzhe (Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Precipitated phase of nickel-based OCTG and its effect on corrosion performance[J];Baosteel Technology;2011-06
10 WANG Xiaoyan,ZHANG Lei,LU Minxu School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Microstructure and properties of dissimilar weldment between duplex stainless steel and micro-alloyed steel[J];Journal of University of Science and Technology Beijing;2008-02
China Proceedings of conference Full-text Database 10 Hits
1 CHEN Lei~1,SUN Jiong-ming~2,SONG Hong-hai~1 (1.Beijing University of Aeronautics and Astronautics,Beijing 100191,China; 2.Mobile Department of Sinopec Zhenhai Refining & Chemical Company,Ningbo 315207,China);Fracture analysis on 1~(st) stage impeller blade of main air compressor[A];[C];2011
2 ;Study on Heat Treatment of Clad Plate Made of S32750+16MnR Stainless Steel[A];[C];2008
3 Yu Zhichuan Li Shoujun Xia Wanyong Chen Shiming Ding Dahu (Technical Center, Changcheng Special Steel Co., Ltd., Pangang Group);RESEARCH ON TRIAL PRODUCTION OF LARGE TUBE BLANK OF DUAL PHASE STEEL 00Cr22Ni5Mo3N[A];[C];2005
5 Chen Peidun,Chen Kun (ShanDong TaiShan Iron and Steel Group Co.,Ltd.,Laiwu 271100,China);Microstructure Analysis for Serious Edge Crack of 06Cr13 Hot-rolled Stainless Steel Strip[A];[C];2009
6 Chen Peidun Chen Kun Wang Hongxia (ShanDong TaiShan Iron and Steel Group Co.,Ltd.,Laiwu 271100,China);06Cr13 Plastic Deformation Characteristics in High-temperature and Microstructure Analysis under Different Quenching Temperature[A];[C];2009
7 Li Donggang Yu Zhiyou Jiang Xingyuan Chi Hebing (Stainless Steel Branch,Baosteel,Shanghai,200431);Analysis and Production of the Super-Low-Carbon Duplex Stainless Steel in Baosteel[A];[C];2009
8 Wang Hongxia (Shandong Taishan Iron and Steel Group Co.,Ltd.,Laiwu,271100);Edge Crack Mechanism Analysis and Technical Improvement of Stainless Steel SUS410S[A];[C];2009
9 LI Ji-kang,LI Wen-cheng (Central Iron and Steel Research Institute,Beijing 100081,China);Analysis on the Reasons for Cracking of a Cracker Heater Shell[A];[C];2009
10 YANG Shou-en,LIU Sheng-bo (Dongfang Boiler Group Co.,Ltd,Zigong 643001,China);Cracking Analysis of Stainless Steel Tube Used for Boiler Super-heater[A];[C];2009
Chinese Journal Full-text Database 10 Hits
1 LI Shilei,WANG Yanli,CHENG Lu,WANG Xitao,LIN Zhi,CHEN Guoliang State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China;Thermal aging mechanism of Z3CN20-09M cast austenite stainless steel[J];Journal of University of Science and Technology Beijing;2008-10
2 XIANG Jian-ying1),SONG Ren-bo1),REN Pei-dong2) 1)School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China2)Technological Center,Jiuquan Iron & Steel Co.Ltd,Jiayuguan 735100,China;Dynamic recrystallization behavior of 316 L stainless steel[J];Journal of University of Science and Technology Beijing;2009-12
3 DING Yi,WANG Ru-hong,JIANG Chen-ying(Shaanxi University of Science and Technology,Xi′an 710021,China);The Development of the Pipeline Robot and Its Application in Packaging Area[J];Packaging and Food Machinery;2009-05
4 LI Hong~1,LUO Haiwen~1,YANG Caifu~1,FANG Xudong~2(1 Institute for Structural Materials,Central Iron & Steel Research Institute,Beijing 100081; 2 Technological Center of Taiyuan Iron & Steel (Group) Co. Ltd,Taiyuan 030003);Review on Mathematical Modeling of Evolutions of Microstructure and Flow Stress in Austenite Stainless Steels during the Hot Rolling Process[J];Materials Review;2006-10
5 LI Xin~(1,2) LU Shiqiang~1 WANG Kelu~1 DING Linhai~1 (1 School of Materials Science and Engieering,Nanchang Hangkong University,Nanchang 330063; 2 Insitute of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016);Discussion on Dissipative Structure Formed During Metal Hot Deformation[J];Materials Review;2008-01
6 Wang Hengde(China Institute for Radiation Protection,Taiyuan,030006);Chernobyl Nuclear Accident and Its Consequences[J];RADIATION PROTECTION BULLETIN;2000-Z1
7 Zhang Wenxiao;Guo Chengbi;Yue Kui;Liang Shali;Ni Hua(Dept.of Power Engineering,DUT);Numerical simulation on mechanics behaviour of thermal fatigue course[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1995-04
8 Gui Yun-ping, Zhao Suo-chen;Failure Analysis of the Primary Loop Piping in LWR Nuclear Plant and Its Solution[J];Power Engineering;1986-06
9 Sun Fengxian,Ma Qingxian;Research on the Control Forging Processes for AP1000 Main Pipe[J];Heavy Castings and Forgings;2010-04
10 Song Shukang,Liu Zhiying,Zheng Jianneng,Deng Lintao,Chen Hongyu;Study on AP1000 Main Piping of the Third Generation Nuclear Power[J];Heavy Castings and Forgings;2011-01
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 Chen Hongyu,Song Shukang,Du Junyi;Manufacturing Technology Progress for AP1000 Forging Main Pipeline[J];Heavy Castings and Forgings;2013-02
2 LI Shu-xiao~(1)),LI Shi-lei~(1)),L Xu-ming~(1)),WANG Yan-li~(1)),XUE Fei~(2)),WANG Xi-tao~(1)) 1) State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China 2) Suzhou Nuclear Power Research Institute,Suzhou 215004,China;Thermal aging embrittlement of cast stainless steel for nuclear primary pipes[J];Journal of University of Science and Technology Beijing;2013-05
3 PAN Pinli1,2 ZHONG Yuexian1,2 MA Qingxian1,2 YUAN Chaolong1,2(1.Department of Mechanical Engineering,Tsinghua University,Beijing 100084;2.Key Laboratory for Advanced Materials Processing Technology of Ministry of Education,Tsinghua University,Beijing 100084);Simulation on Forming Uniformity of Nuclear Main Pipe Forging[J];Journal of Mechanical Engineering;2013-10
4 MA Xue-Yuan(China Nuclear Power Engineering Co.,Ltd.,Beijing 100840,China);Technical Requirements of Nuclear Pipe and Fittings and Purchase[J];Development & Innovation of Machinery & Electrical Products;2013-04
5 PAN Pin-li ZHONG Yue-xian MA Qing-xian YUAN Chao-long LUO Jin-ping(Key Laboratory for Advanced Materials Processing Technology of Ministry of Education, Department of Mechanical Engineering,Tsinghua University,Beijing 100084 China);Research on the dynamic recrystallization behavior of 316LN steel under multi-pass deformation[J];Journal of Plasticity Engineering;2011-05
6 PAN Pinli,ZHONG Yuexian,MA Qingxian,YUAN Chaolong(Key Laboratory for Advanced Materials Processing Technology of Ministry of Education,Department of Mechanical Engineering, Tsinghua University,Beijing 100084,China);Grain refinement during plastic forming of 316LN steel used in nuclear main pipes[J];Journal of Tsinghua University(Science and Technology);2013-03
7 Pan Pinli Zhong Yuexian Ma Qingxian Yuan Chaolong Zhu Siyang Key Laboratory for Advanced Materials Processing Technology of Ministry of Education, Tsinghua University,Beijing,100084;Research on Deformation Property of 316LN Nuclear Main Pipe Steel at Elevated Temperature[J];China Mechanical Engineering;2012-11
8 WANG Zheng-pin;WANG Fu-guang;LIU Zhen-ting;YAO Yu-hong;SHI Chong-zhe;School of Materials and Chemical Engineering,Xi'an Technological University;;Spinodal Decomposition in the Thermal Aging Process of Z3CN20.09M Cast Duplex Stainless Steel[J];Journal of Xi'an Technological University;2013-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved