Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Hefei University of Technology(Natural Science)》 2004-10
Add to Favorite Get Latest Update

Discussion on several issues in ISO10360-2 Standard

MA Xiu-shui~(1,2),FEI Ye-tai~1,CHEN Xiao-huai~1,WANG Hong-tao~1,ZHAO Jing~1(1.School of Instrument, Hefei University of Technology, Hefei 230009, China; 2. Dept. of Measurement and Control Engineering, Anhui University, Hefei 230029, China)  
The primary content of ISO10360-2(draft 13B, 2004) is introduced in this paper,and several suggestions are proposed. It is pointed out that the error of indication E_0 for the calibrated test length which are measured when the offset length between the ram axis and the stylus tip is zero shall neither exceed the maximum permissible error MPE_(E0) nor exceed 1/3 of the probe error,that the repeatability of E_0 shall neither exceed the maximum permissible error MPE_R nor exceed the repeatability error of the probe,and that if the measuring data is rejected in acceptance and reverification,measurement must be carried at least 5 times at the same position for reducing the possibility of misjudgement.
【Fund】: 国家自然科学基金资助项目(50275047)
【CateGory Index】: TH721
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GE Jian-zhong1,HUANG Song-qing2,GE Cong3(1.Dept.of Mech.Engn.,Wuhu Institute of Technology,Wuhu 241000,China;2.Elec.Auto.Dept.,Anhui University of Technology,Maanshan 243011,China);Probation into coordinates measuring strategy[J];Journal of Anhui University of Technology and Science(Natural Science);2010-04
2 SHI Zhao-yao,ZHANG Bin,LIN Jia-chun,ZHANG Hua(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Half Century of Coordinate Metrology Technology——Evolution and Trends[J];Journal of Beijing University of Technology;2011-05
3 HUANG Yong-jing,RUAN Wen-tao (Electronic Information and Electric Engineering Department, Chengdu Textile College,Chengdu 611731);Application of Modern Precision Theory in Precision Measurement Instruments[J];Journal of Chengdu Textile College;2011-04
4 YANG Zhiwen,WANG Jinjiang,XU Rongwei(College of Opto Electronic and Mechanical Engineering of Changchun University of Science and Technology);Surveying of Large Size Shape[J];Journal of Changchun Institute of Optics and Fine Mechanics;2002-02
5 ZHAO Jin-cai*,LIU Shu-gui(State Key Laboratory of Precision Measuring Technology and Instruments,Tianjin University,Tianjin 300072,China);Automatic Recognition for the Position and Pose of Parts Based on Image Moment Invariants and Neural Network[J];Chinese Journal of Sensors and Actuators;2006-06
6 QIU Zu-rong1,LI Wen-jing1,LI Xing-hua1,WANG Sheng-jun2(1.State Key Laboratory of Precision Measuring Technology and Instrument,TianjinUniversity,Tianjin 300072,China;2 Shandong Machine Corporation,Zibo 255201,China);Study on data fusion of seven-axes comprehensive measurement of axisymmetric body[J];Transducer and Microsystem Technologies;2009-12
7 LI Guangyun (Institute of Surveying and Mapping,Information Engineering University,66 Middle Longhai Road,Zhengzhou 450052,China);PRINCIPLE AND DEVELOPING TREND OF NON-ORTHOGONAL COORDINATE SYSTEMS[J];Wtusm Bulletin of Science and Technology;2003-01
8 LI Zongchun XU Zhongyang ZHANG Guanyu (Institute of Surveying and Mapping Information Engineering University,66 Middle Longhai Road,Zhengzhou 450052,China);A NEW METHOD FOR MEASURING SWIVEL TABLE[J];Wtusm Bulletin of Science and Technology;2003-02
9 WANG Yu-hua, FAN Yan-bin (Dept. of Mechatronics, Foshan University, Foshan 528000, China);The Minimal Area Method for the Error Evaluating of Cone-Type Profile[J];Journal of Test and Measurement Technology;2004-02
10 JIA Wen-you,LIU Li(Anhui University of Technology andScience,Wuhu 241000,China);Discussion of Micro-CMM Framework Structure[J];Group Technology & Production Modernization;2009-01
China Proceedings of conference Full-text Database 2 Hits
1 ;Short arc measurement error analysis and alternative solutions[A];[C];2009
2 LIU Peng-cheng (Measurement Department,AVIC Xi'an Aero-Engine(Group) Ltd,Xi'an 710021,China);Improvement Inspection Method of Turbine Disk Dovetail Slot's Deviation[A];[C];2010
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Pan Yalin (Anhui Institute of Architecture & Industry, Hefei, 230022) Chen Xiaohuai Yu Xinyou (Hefei University of Technology, 230009) (Leshan Teachers College, 614000);Analysis and Computation on Precision of 3-D Coordinate Measuring Machine[J];Cryogenics and Superconductivity;2004-02
2 YANG Hong-tao,FEI Ye-tai,CHEN Xiao-huai(1.School of Instrument Science and Opto-electronic Engineering Hefei University of Technology,Hefei 230007,China;2.Department of Mechanical Enginneering of Anhui University of Science & Technology,Huainan 232001,China);Uncertainty Analysis and Accuracy Design of Nano-CMM[J];Journal of Chongqing University(Natural Science Edition);2006-08
3 Xu Kejun et al;The Error Test and Module Building of Capacitance Scale Used in Machine Tools[J];Tool Engineering;1994-08
4 Xu Kejun;Research and Development Present Situation of Capacitive Transducer[J];Tool Engineering;1994-12
5 Fu Zhongzheng et al;Research on a New Articulation-type Coordinate Measuring Michine[J];TOOL ENGINEERING;1997-01
6 Wu Wenbing et al;Accuracy and Performence Assessment of Coordinate Measuring Machines[J];Tool Engineering;1997-02
7 Lin Shuwen et al;Correlation Analysis of Fundamental Motion Errors of CMM[J];Tool Engineering;2001-12
8 Ma Xiushui Fei Yetai Chen Xiaohuai et al;Discuss of Standard of Acceptance Test and Reverification Test for CMM Probing Performance with Contacting Probing System[J];Tool Engineering;2005-05
9 Ye Dong et al;Calibration Algorithm of Joint Zero position Deviations for 6 DOF Joint type CMM[J];TOOL ENGINEERING;1999-04
10 Tao Jiasheng(Changchun Institute of Optics and Fine Mechanics,Chinese Academy of Sciences, Changchun 130022);Calculation or Close Double Row Orifice Rectangulsr Aerostatic Slideways[J];OPTICS AND PRECISION ENGINEERING;1996-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 GE Jian-zhong1,HUANG Song-qing2,GE Cong3(1.Dept.of Mech.Engn.,Wuhu Institute of Technology,Wuhu 241000,China;2.Elec.Auto.Dept.,Anhui University of Technology,Maanshan 243011,China);Probation into coordinates measuring strategy[J];Journal of Anhui University of Technology and Science(Natural Science);2010-04
2 Liu Yong Yang Hongtao;Research on Dynamic Characteristic of CMM Probe[J];Tool Engineering;2008-05
3 Guo Chengcao,Master,Lecturer,Mechanical & Electrical Engineering Department,Chengdu Electro-Mechanical College,Chengdu 610031,China;Research on Auto-adapted Sample Planning and Algorithm in Three-coordinate Measurement of Leaf Blade Profile[J];Tool Engineering;2010-10
4 FENG Ping;WEI Zhen-zhong;Key Laboratory of Precision Opto-mechatronics Technology of the Ministry of Education,Beihang University;;Light probe based large FOV 3D vision measurement system[J];Optics and Precision Engineering;2013-09
5 YANG Hong-tao1,FEI Ye-tai2,CHEN Xiao-huai2,XIA Rui-xue2 (1.School of Mechanical Engineering,Anhui University of Science and Technology,Huainan Anhui 232001,China;2.School of Instrumentation Science and Opto-electronics Engineering,Hefei University of Technology,Hefei Anhui 230009,China);Analysis and Separation of Nano-CMM Error[J];Journal of Anhui University of Science and Technology(Natural Science);2010-03
6 WU Tian-feng,YANG Hong-tao (School of Mechanical Engineering,Anhui University of Science and Technology,Huainan Anhui 232001,China);Dynamic Correlation Error Modelling of CMM Based on nu-SVM[J];Journal of Anhui University of Science and Technology(Natural Science);2011-04
7 ZHANG Mei1,FEI Ye-tai2(1.College of Electrical Engineering and Automation,Anhui University,Hefei 230601,China; 2.School of Instrument Science and Opto-Electronic Engineering,Hefei University of Technology,Hefei 230009,China);Hybrid Modeling of CMM Dynamic Error Based on Improved Partial Least Squares[J];Nanotechnology and Precision Engineering;2012-06
8 YANG Hong-tao1,LIU Yong1,FEI Ye-tai2,CHEN Xiao-huai2(1.School of Mechanical Engineering,Anhui University of Science & Technology,Huainan 232001,China;2.School of Instrument Science and Opto-Electronic Engineering,Hefei University of Technology,Hefei 230009,China);Dynamic error generated by air-bearing guide of coordinate measuring machine[J];Journal of Shenyang University of Technology;2011-01
9 Ma Xiushui~1 Fei Yetai~2 Li Guang~(1,3) Zhang Mei~3 Li Xianyi~1 (1 Ningbo Institute of Technology,Zhejiang University,Ningbo 315100,China;2 Hefei University of Technology,Hefei 230009,China;3 Anhui University,Hefei 230039,China);Study on dynamic measurement uncertainty evaluation for CMMs[J];Chinese Journal of Scientific Instrument;2008-10
10 Yang Hongtao1,Liu Yong1,Fei Yetai2,Chen Xiaohuai2(1 School of Mechanical Engineering,Anhui University of Science & Technology,Huainan 232001,China;2 School of Instrument Science and Opto-electronic Engineering,Hefei University of Technology,Hefei 230009,China);Hybrid modeling method for CMM dynamic error[J];Chinese Journal of Scientific Instrument;2010-08
China Proceedings of conference Full-text Database 1 Hits
1 MA Xiu-shui 1 FEI Ye-tai 2 LI Guang 1,3 ZHANG Mei3 LI Xian-yi 1 1 Ningbo Institute of Technology, Zhejiang University, Ningbo, 315100, China 2 Hefei University of Technology, Hefei, 230009, China 3 Anhui University, Hefei, 230039, China;Study Of Dynamic Measurement Uncertainty Evaluation For CMMs[A];[C];2007
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved