Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Hefei University of Technology(Natural Science)》 2009-03
Add to Favorite Get Latest Update

Economic analysis of disassembly and reclamation of end-of-life vehicles

LIU Zhi-feng,ZHANG Shao-ting,SONG Shou-xu,KE Qing-di(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China)  
The efficient reclamation of end-of-life vehicles is of important significance to environmental protection,optimal configuration of resources and development of circulation economy.This paper presents a hierarchy disassembly model based on the reclamation strategy and establishes an economic evaluation model for recycling of end-of-life vehicles to evaluate reclamation profit quantitatively.With one specific disassembly example,the paper explains the economic model of reclamation and offers some suggestions for improving the reclamation economy.
【Fund】: 国家自然科学基金重点资助项目(50735006)
【CateGory Index】: X734.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 ZHOU Zi-qiang1,DAI Guo-hong2,ZHANG Yong-jian2(1.School of mechanical engineer,Changshu Institute of Technology,Changshu 215500,China; 2.Key Laboratory of Intelligent Equipment for ELV Recycling Technology,Suzhou,215500,China);Research of ELV Recycling Mode under the National Conditions of China[J];Journal of Jiangsu Teachers University of Technology;2011-10
2 ZHOU Zi-qiang1,2,DAI Guo-hong1,2,TAN Han-mo1,2,ZHANG Yong-jian1(1.School of Mechanical Engineering,Changshu Institute of Technology,Changshu 215500,China;2.Suzhou Key Laboratory of Intelligent Equipment for ELV Recycling Technology,Changshu 215500,China);A Research on and Analysis of Cost Model for the Recycling Process of End-of-Life Vehicles[J];Journal of Changshu Institute of Technology;2012-10
3 GONG Yun-feng,LU Shi-biao(Jiangsu Huahong Technology Stock Co.,LTD,Jiangyin 214423,China);The Design of Flexible Dismantle Cell for the Recycling of End-of-Life Vehicles[J];Journal of Changshu Institute of Technology;2012-10
4 ZHANG Yi-heng1, ZHU Liang-liang2, TAN Han-mo2 (1. Technology Quality Department, Changshu Great Wall Bearing Co., Ltd., Changshu 215500, China; 2. School of Mechanical Engineering, Changshu Institute of Technology, Changshu 215500, China);A Study on the Green Dismantling of Large Scrapped Buses[J];Journal of Changshu Institute of Technology;2013-04
5 LIU Lin,LIU Guang-fu,SONG Shou-xu,ZHAN Yang (School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Economic analysis of remanufacturing processes of end-of-life electro-mechanical products[J];Journal of Hefei University of Technology(Natural Science);2011-08
6 SHI Ying-ying1,LIU Zhi-feng1,ZHANG Hong-chao1,2,HU Di1(1.School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China;2.Dept.of Industrial Engineering,Texas Technology University,Lubbock,TX 79409,USA);Product disassembly sequence planning based on cockroach swarm optimization[J];Journal of Hefei University of Technology(Natural Science);2011-11
7 CHEN Shan,YIN Hui-ling;Recycling and using of the discarded automobiles[J];Journal of Hubei Radio & Television University;2010-10
8 LUO Long-jun1,2,LI Liang-chun1,SONG Gui-fei3,ZHANG Yi1(1.Ordnance Technology Institute of Ordnance Engineering College,Shijiazhuang 050000,China;2.Unit 75752 of PLA,Foshan 528100,China;3.China Aerodynamics Research and Development Center,Mianyang 622661,China);Decision-making of Recycling Level of Retired and Condemned Common Weapon and Radar[J];Equipment Environmental Engineering;2013-03
9 LIU Zhi-feng,YANG Bin,LIU Tao,HUANG Hai-hong,SONG Shou-xu(School of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei 230009,China);Analysis Base on QFD on Design for Remanufacturing of Gear-box[J];Modular Machine Tool & Automatic Manufacturing Technique;2010-06
10 LI Yu-min(School of Management Engineering,Zhengzhou University,Zhengzhou 450001,China);Analysis on “Pension” Institution of Scrap Vehicles' Returned Logistics Based on System Dynamics[J];Chinese Journal of Systems Science;2012-03
【Citations】
Chinese Journal Full-text Database 6 Hits
1 ZHANG Ting-kai, WANG Chuan-sheng (Qingdao University of Science and Technology, Qingdao 266042, China);Product' s Level Construction Tree Model and the Method of Generating Disassembly Sequence[J];Mechanical Engineer;2005-02
2 Li Yuling Zhao Shu'en(Shaanxi University of Technology);Disassembly Process Planning of Products Based on Petri Nets[J];Transactions of the Chinese Society for Agricultural Machinery;2006-07
3 Guo Weixiang Liu Guangfu Liu Zhifeng Huang Haihong(Hefei University of Technology);Economic Analysis and Decision-making for Material Recycling[J];Transactions of the Chinese Society for Agricultural Machinery;2006-12
4 LI Jian-feng, CHEN Jian, LI Fang-yi, WANG Yu-ling (School of Mechanical Engineering, Shandong Univ., Jinan 250061, China);Disassembly-recycling model and generation of disassembly sequences of electromechanical products[J];Journal of Shandong University (Engineering Science);2004-05
5 XIE Jia-ping\+1,CHEN Rong-qiu\+2 (1. International Management for Business School,Shanghai University of Finance Economics,Shanghai 200433,China;2. Management School,Huazhong University of Science Technology,Wuhai 430074, China);0-1 Goal-Programming Model on Products' Recovery Processing Policies[J];Systems Engineering-theory & Practice;2004-03
6 Yao liying(Tsinghua University,Beijing,China) Gao Jiangang Duan Guanghong Xue Junfang;A Method of Generating Disassembly Sequence Planning Based on Level Connection Model[J];China Mechanical Engineering;2003-17
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 SUN Ying-sun1,2,DING Bin1(1.School of Management,University of Science and Technology of China,Hefei 230026,China;2.Department of Business Administration,Anhui Business College of Vocational Technology,Wuhu 241003,China);A Review on the Study of Reverse Logistics[J];Journal of Anhui Business College of Vocational Technology;2008-03
2 GUO Wei 1,LU Hongjuan 1,SHAO Hongyu 2(1.School of Management,Tianjin University,Tianjin 300072;2.School of Mechanical Engineering,Tianjin University,Tianjin 300072);Study on the Economic of Engine Remanufacturing Based on System Dynamo Model[J];Journal of Beijing Institute of Technology(Social Sciences Edition);2011-04
3 XU Bin-shi1,LIU Shi-can2,LI Ren-han3,YAO Ju-kun2,XIANG Yong-hua2 (1. National Key Labarotary for Remanufacturing, Beijing 100072; 2. Department of Material Science and Engineering, Institute of Armord Forces Engineering, Beijing 100072; 3. Chinese Academy of Engineering, Beijing 100000);Basic Approach and Developmental Foreground Study of Resource Recovery For Used Electromechanic Products[J];China Surface Engineering;2004-02
4 LIU Yu1 LI Yi 2(1.School of Mechanical & Electrical Engineering,Changzhou Institute of Technology,Changzhou 213002; 2.School of Materials Science and Engineering,Chang′an University,Xi′an 710000);A Study of the Used Automobile Dismantling and Recycling Technology[J];Journal of Changzhou Institute of Technology;2012-01
5 ZHOU Zi-qiang1,DAI Guo-hong2,ZHANG Yong-jian2(1.School of mechanical engineer,Changshu Institute of Technology,Changshu 215500,China; 2.Key Laboratory of Intelligent Equipment for ELV Recycling Technology,Suzhou,215500,China);Research of ELV Recycling Mode under the National Conditions of China[J];Journal of Jiangsu Teachers University of Technology;2011-10
6 HOU Yi, ZHU Dong-sheng The Institute of Chemical Engineering, South China University of Technology , Guangzhou(510640);Developments on the techniques of the Recycling Treatment an Reuse for Used and Discarded Refrigerators and Air-conditioner[J];;2003-01
7 XIE Jia-ping1,ZHAO Zhong1,KONG Ling-cheng2,CHEN Rong-qiu3 (1.School of International Business Administration,Shanghai University of Finance & Economics,Shanghai 200433,China;2.School of Business,East China University of Sci&Tech,Shanghai 200237,China;3.Management School,Huazhong University of Science & Technology,Wuhan 430074,China);An Affecting Factors and Optimizing Model for the Remanufacturing Production Planning[J];Systems Engineering;2007-07
8 ZENG Min-gang,ZHOU Ming-jian (School of Business Administration,South China University of Technology,Guangzhou 510640,China);A Reverse Logistics Model for the Recycling of Scrap Computers[J];Industrial Engineering Journal;2006-06
9 XIE Jiaping REN Yi ZHAO Zhong(Shanghai University of Finance and Economics,Shanghai,China);Stochastic Network Model for Disassembly of Discarded Products[J];Chinese Journal of Management;2007-02
10 ZHAO Zhong XIE Jiaping REN Yi(Shanghai University of Finance & Economics,Shanghai,China);Review of the Recovery and Remanufacturing Planning for Discarded Products[J];Chinese Journal of Management;2008-02
China Proceedings of conference Full-text Database 4 Hits
1 Xu Bin-shi Academy of Armored Forces Engineering(National Key laboratory for Remanufacturing,Beijing 100072 China);Surface engineering for remanufacturing and its development[A];[C];2008
2 Xu Bin-shi (Academy of Armored Forces Engineering, National Key Laboratory for Remanufacturing, Beijing, 100072, P. R. China);Study on the remanufacturing for military equipment and its tribological properties[A];[C];2006
3 Fu Zhan-ping Zhao Hua-ying Wang Yun-xiang (Naval Aeronautical Engineering Institute,Qingdao,Shandong.266041);The Arithmetic to Produce Disassembly Sequence Based on Dynamic Search[A];[C];2007
4 ZHANG Ying-hua, SANG Jin-yan, ZHANG Ji-lin School of Business, Tianjin University of Finance and Economics, Tianjin 300222,China;Researches on the Operations Models of Eco-friendly Enterprises Based on Circular Economy——Based on the investigations of Tianjin Binhai New Area[A];[C];2008
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Zhi-jian, TIAN Xin-Li, HU Zhong-xiang, XIE Feng-kuan (Armoured Engineering Institute, Beijing 100072, China);Developments of theory and technology of hypersonic oxy-fuel spraying[J];Ordnance Material Science and Engineering;2002-03
2 CHANG Xiang qing, NING Ru xin (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China);A Method of Automatically Generating and Evaluating Assembly and Disassembly Sequences[J];Journal of Beijing Institute of Technology;2001-05
3 XIAO Yan-qiu,XUE Qing,WANG Ai-min,SUN Hou-fang,LI Hai-chao(School of Mechanical and Vehicular Engineering,Beijng Institute of Technology,Beijing 100081,China);A Study on the Modular Design of Product Based on Collaborative Optimization[J];Transactions of Beijing Institute of Technology;2008-12
4 Xu Binshi; Zhang Wei; Ma Shining; Liu Shican;Green Remanufacturing Towards the 21~(st) Century[J];CHINA SURFACE ENGINEERIGN;1999-04
5 XU Bingshi LI Renhan LIANG Xiubing;Progress of Green Remanufacture Engineering[J];China Surface Engineerign;2001-02
6 XU Bin-shi,ZHU Sheng,MA Shi-ning, LIU Shi-can, LIANG Xiu-bing (National Key Laboratory for Remanufacturing,Beijing 100072 China);Construct and Development of Equipment Remanufacture Engineering Specialty[J];China Surface Engineering;2003-03
7 XING Zhong,JIANG Ai-liang,XIE Jian-jun,FENG Yi-cheng (Jinan FuQiang Power CO.,LTD. Jinan 250002);Benefit analysis and Surface Engineering Application of Automobile Engine Remanufacturing[J];China Surface Engineering;2004-04
8 XU Bin-shi1,LIU Shi-can1,SHI Pei-jing1,XING Zhong2,XIE Jian-jun2 (1 National Key Lab for Remanufacturing, Beijing 100072; 2 Jinan Fuqiang Power Co, LTD, Jinan 250002);Study on the Contribution of Engine Remanufacturing to the Recycle Economy[J];China Surface Engineering;2005-01
9 ZHU Shao-hua, XU Bin-shi (National Key Laboratory for Remanufacturing, Beijing 100072);Resource Environment Assessment of Remanufacturing for Waste Mechanical Products[J];China Surface Engineering;2006-02
10 XU Bin-shi,LIU Shi-can,ZHANG Wei,SHI Pei-jing (National Key Laboratory for Remanufacturing,Academy of Armored Forces Engineering,Beijing,100072);Prospect of Industrialization Applications for Green Remanufacturing Engineering in Main Mechanical and Electronical Equipment Fields[J];China Surface Engineering;2006-S1
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 ZHOU Zi-qiang1,2,DAI Guo-hong1,2,TAN Han-mo1,2,ZHANG Yong-jian1(1.School of Mechanical Engineering,Changshu Institute of Technology,Changshu 215500,China;2.Suzhou Key Laboratory of Intelligent Equipment for ELV Recycling Technology,Changshu 215500,China);A Research on and Analysis of Cost Model for the Recycling Process of End-of-Life Vehicles[J];Journal of Changshu Institute of Technology;2012-10
2 GONG Yun-feng,LU Shi-biao(Jiangsu Huahong Technology Stock Co.,LTD,Jiangyin 214423,China);The Design of Flexible Dismantle Cell for the Recycling of End-of-Life Vehicles[J];Journal of Changshu Institute of Technology;2012-10
3 WU Zhao-ren1,3,ZHOU Zi-qiang1,2,DAI Guo-hong1,2(1.School of Mechanical Engineering,Changshu Institute of Technology,Changshu 215500,China;2.Suzhou Key Laboratory of Intelligent Equipment for ELV Recycling Technology,Changshu 215500,China;3.School of Mechatronic Engineering,China University of Mining and Technology,Xuzhou 221116,China);A Review of Shredding and Sorting Technology for End-of-Life Vehicle Body Shell[J];Journal of Changshu Institute of Technology;2012-10
4 ;空调拆卸工艺路线的优化选择[J];Electrical Appliances;2013-01
5 ZHANG Yi-heng1, ZHU Liang-liang2, TAN Han-mo2 (1. Technology Quality Department, Changshu Great Wall Bearing Co., Ltd., Changshu 215500, China; 2. School of Mechanical Engineering, Changshu Institute of Technology, Changshu 215500, China);A Study on the Green Dismantling of Large Scrapped Buses[J];Journal of Changshu Institute of Technology;2013-04
6 ZENG Zhi-min,LIU Zhi-feng,LING Bo,BAO Hong,CHEN Yang(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Research on key technology of automotive disassembly and recycling knowledge reuse based on rough set[J];Journal of Hefei University of Technology(Natural Science);2013-07
7 SHI Jun-li1,WANG De-quan1,QU Hong-wei2(1.School of Mechanical Engineering & Automation,Dalian Polytechnic University,Liaoning Dalian 116034,China;2.Dalian SANYO compressor co.,Ltd.Liaoning Dalian116600,China);The Application Study on the Fuzzy Evaluation Based QFD for Refrigeration Compressor Design[J];Modular Machine Tool & Automatic Manufacturing Technique;2011-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 CHANG Xiang qing, NING Ru xin (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081, China);A Method of Automatically Generating and Evaluating Assembly and Disassembly Sequences[J];Journal of Beijing Institute of Technology;2001-05
2 WANG Bo1, WANG Ningsheng2(1.Dept.of Machanical Eng.,East China Shipbuilding Institute, Zhenjiang Jiangsu 212003, China;2.Machineryelectric Engineering Institute, Nanjing University of Aeronautics and Astronautics,Nanjing Jiangsu 210016, China);Research on Disassembly Model Based on Petri Net for a Product[J];Journal of East China Shipbuilding Institute(Natural Science Edition);2003-03
3 JIANG Dan dong, LIU Guang fu (School of Mechanical and Automobile Engineering, Hefei University of Technology, Hefei 230009, China);The system composition of design for disassembly[J];JOURNAL OF HEFEI UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE);1999-04
4 Huang Tianze (College of Mechanical and Automotive Engineering, Hunan Univ, 410082, Changsha, P R China);Development Trends of the World Auto Industry[J];JOURNAL OF HUNAN UNIVERSITY(NATURNAL SCIENCES);1997-05
5 Cai Xueyuan Hu Yujin Hu Junjun Li Chenggang;Decision on the Optimum Route of Disassembly in the Process of Recycling Product[J];JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY;2000-03
6 Le Qing Hu Yujin Xu Xiaoming Li Chenggang College of Mech. Sci. & Eng., HUST, Wuhan 430074, China.;Research on Evaluating Product Maintenance Cost on Life-cycle[J];Journal of Huazhong University of Science and Technology;2001-02
7 Xie Jiaping Chen Rongqiu Xie Jiaping Doctoral Candidate; College of Management, Huazhong Univ. of Sci. & Tech., Wuhan 430074, China.;Cost model for the disassembly processes of assembled products[J];Journal of Huazhong University of Science and Technology;2003-05
8 HAN Shui Hua LU Zheng Ding CHEN Chuan Bo (Computer Engineering Department, Huazhong University of Science and Technolgy, Wuhan 430074);Automatic Assembly Process Planning Based on Geometric Inference[J];JOURAAL OF COMPUTER AIDED DESIGN & COMPUTER GRAPHICS;2000-07
9 Cao Pengbin Liu Jihong Guan Qiang (School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074);Virtual Disassembly Based on Dynamic Management of Assembly Constraints[J];Journal of Computer Aided Design & Computer Graphics;2002-10
10 Guo Weixiang Liu Zhifeng Liu Guangfu Pan Xiaoyong Huang Haihong (School of Mechanical and Automobile Engineering, Hefei University of Technology, Hefei 230009);Disassembly Sequence Planning Based on Modularization[J];Journal of Computer Aided Design & Computer Graphics;2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved