Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《ENGINEERING CHEMISTRY & METALLURGY》 2000-04
Add to Favorite Get Latest Update

Preparation and Characterization ofα-FeOOH /α-Fe_2O_3 Nanoparticles

GAO Zhi-hua,LI Chun-hu (Institute for Chemical Engineering of Coal , Taiyuan University of Technology, Shanxi Taiyuan 030024, China)  
α-FeOOH/α-Fe2O3 nanoparticles were prepared in our laboratory using homogeneous precipitation, ammonia titration and surfactant ammonia titration methods. The products were characterized through modern technique of TEM, XRD, FTIR. Moreover, the catalysts usingα-FeOOH/α-Fe2O3 nanoparticle as active ingredient were tested by the microreactor-chromatography assessing apparatus at the ambient pressure in the temperature range from 25~60℃ with the space velocity of 10000 h-1. The results show that the three methods are feasible to prepare nanoparticles with an average particle diameter of less than 100 nm, but with different morphologies. The ammonia titration method can produce nanoparticles consisting ofα-FeOOH phase only, but the products from other two methods are mixture ofα-FeOOH andα-Fe2O3. The nanoparticle-based catalyst is found highly active for COS hydrolysis at low temperature under high space velocity, and H2S is also removed at the same time.
【Fund】: 山西省青年科技基金资助项目!(编号:951007)
【CateGory Index】: TB383
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved