Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Transactions of The China Welding Institution》 2005-05
Add to Favorite Get Latest Update

Effect of ball milling condition on formation of Sn-0.7Cu alloy

LIU Xin,XIA Zhi-dong,LEI Yong-ping,SHI Yao-wu(The Key Laboratory of Advanced Functional Material Ministry of Education China, Beijing University of Technology,Beijing 100022,China)  
The mixed Sn and Cu powder was milled by mechanical ball milling.The milled powders were analyzed by X-ray diffraction,differential thermal analyzer and scanning electron microscope.The effect of ball milling conditions on the formation of Sn-0.7Cu alloy was investigated.The results showed that voltage,ball-to-powder mass ratio,and milling time affect the formation of Sn-0.7Cu alloy significantly.The mechanism of mechanical alloying Sn-Cu was that the mechanically-induced atom diffusion drives substitutional solid solution and interface dissolution,as a result of which Cu_6Sn_5 was formed.
【Fund】: 国家863计划项目(2002AA322040);; 北京市自然科学基金资助项目(012003);; 北京市教育委员会资助项目(05009012200201)
【CateGory Index】: TG131
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Xiao Pingan 1 ,Qu Xuanhui 2 ,Qin Mingli 2 ,Huang Peiyun 3 (1.Changsha University of Science an d Technology,Changsha 410076 ,Chin a)(2.University of Science and Technology Beijing,Beijing 10008 3,China)(3.State Key Laboratory for Powder Me tallurgy,Central South Un iv ersity,Changsha 410083,China);Influence of Milling Rate and Process Control Agents on Mechanica l Alloying of Ti-26Cr[J];Rare Metal Materials and Engineering;2003-09
2 ZHANG Xian sheng 1,RAN Guang 2 (1 Panzhihua Iron and Steel (Group) Corporation Office,Panzhihua Sichuan 617067,China; 2 School of Materials Science and Engineering,Xi'an Jiaotong University,Xi'an Shanxi 710049,China);Review of the Reactive Mechanism in Mechanical Alloying[J];Heat Treatment of Metals;2003-06
3 WANG De zhi 1,ZHANG Hou an 2,LIU Xin yu 3,ZUO Tie yong 4 (1 Electromechanic Engineering College,RailWay School District,Central South University, Changsha 410075 China;2 Mechanical Department of Xiangtan Polytechinic University, Xiangtan 411;Effect of Ball Milling on Mechnical Alloying of MoSi_2[J];Rare Metals and Cemented Carbides;2001-02
4 Wang Dezhi , , Liu Xinyu , Zuo Tieyong , Cheng Jun and Qian Jiewen Department of Materials Science and Engineering, Central South Unviersity of Technology, Changsha 410083, P. R. China Electromechamic Engineering College, Changsha Railw;EFFECT OF BALL MILLING CONDITION ON FORMATION OF MoSi 2[J];THE CHINESE JOURNAL OF NONFERROUS METALS;1998-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 DING Yuan–zhu, ZHAO Guo–gang, WANG Zhen–ting (College of Materials Science and Engineering, Heilongjiang Institute of Science and Technology, Harbin 150027);Microstructure and Wear Resistance of in-situ Synthesis ZrC Particulate Reinforced Metal Matrix Composite Coating by Argon Arc Cladding[J];China Surface Engineering;2009-03
2 LIU Xinyu ZHANG Houan WANG Mengjun (Dep. of Materials Science and Engineering.Central South University,Changsha 410083; Guilin Institute of Electric Technology,Guihn 541004; 3 Dep. of Mechanic Engineering and Automation,Xiangtan Polytechnic University.Xiangtan 411201);MoSi2 Matrix Composites Prepared by Mechanical Alloying[J];Materials Review;2002-05
3 LEI Ruoshan,WANG Mingpu,GUO Mingxing,LI Zhou,CAO Lingfei,TANG Ning(School of Materials Science and Engineering,Central South University,Changsha 410083);Studies on Cu-Nb Nano-particle Dispersion Strengthened Copper Alloys Prepared by Mechanical Alloying[J];Materials Review;2007-S1
4 Zhang Zhongwu,Zhou Jingen ,Xi Shengqi,Li Pengliang,Zhang Wenxing,Rang guang(Xi’an Jiaotong University,Xi’an 710049,China);Studies on Thermodynamic and Kinetic and Phase Evolution of W-Ni-Fe Powder during Mechanical Alloying[J];Rare Metal Materials and Engineering;2004-10
5 Guo Yongfeng,Ding Chunhua,Zhang Hongtao,Yang Zhimao,Ding Bingjun(State Key Laboratory for Mechanical Behavior of Material,Xi'an Jiaotong University,Xi'an 710049,China);The Preparation of PS304 Nonacomposite Powders by High Energy Milling[J];Rare Metal Materials and Engineering;2006-12
6 XIAO Lai-rong, YI Dan-qing, SONG Cheng, CAI Zhi-gang, XU Liang-liang (School of Materials Science and Engineering, Central South University, Changsha 410083, China);Synthesis of Mo(Si, Al)_2 powders by mechanical alloying[J];Materials Science and Engineering of Powder Metallargy;2005-02
7 Zhang Houan~ 1),2) ,Liu Xinyu~ 3),2) , Chen Ping~ 1) 1)(Institute of Material Surface Engineering, Xiangtan Polythecnic University,Xiangtan 411201) 2)(Department of Material Science and Engineering,Central South University,Changsha 41008;Synthesis of Al/MoSi_2 Powders by Mechanical Alloying[J];Powder Metallurgy Technology;2002-03
8 Meng Jie~ 1) , Jia Chengchang~ 1) , Wang Kaiming~ 2) 1)(School of Materials Science and Engineering, USTB, Beijing 100083,China) 2)(Department of Physics, Anshan University of Science and Technology, Anshan Liaoning 114044, China);Review of formation of Ni_3Al intermetallics compounds by mechanical alloying[J];Powder Metallurgy Technology;2006-04
9 Chen Guohua(Research Center for Materials Science and Engineering, Guilin University of Electronic Technology 541004);Application of Mechanochemistry in the Research of Ceramic Materials[J];;2003-06
10 LI Jian-ying~1,OUYANG Yi-fang~2,CAO Qi-zhi~1,ZHONG Xia-ping~2(1.Department of Physics and Electronic Information Science,Guangxi Teachers Education University,Nanning 530001,China)(2.College of Physics Science & Technology,Guangxi University,Nanning 530004,China);Mechanical Alloying for Mo-P System[J];Journal of Guangxi Teachers Education University(Natural Science Edition);2006-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 ;Mechanism of Mechanical Alloying[J];Materials Review;1997-06
2 XIAO Ping-an, QU Xuan-hui, LEI Chang-ming, QIN Ming-li, ZHU Bao-jun, GAO Jian-xiang, HUANG Pei-yun(State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China;Department of Automobile and Electro-mechanic Engineering, Changsha Communications University, Changsha 410076, China;School of Materials Science and Engineering, Science and Technology University of Beijing, Beijing 100083, China);Mechanical alloying of hypereutectoid Ti - Cr alloys[J];Material Science and Technology;2002-03
3 Ouyang Yifang1,2,Zhong Xiaping1,3, Xiao Hongling1, Wu Weiming1(1. Guangxi University, Nanning 530004, China)(2. International Center of Materials Physics, Chinese Academy of Sciences, Shengyang 110016, China)(3. Guilin Institute of Technology, Guilin 541004, China);Progress in Research of Cryomilling[J];Rare Metal Materials and Engineering;2003-06
4 Zhu Xinkun;Lin Qiushi;Chen Tieli;Cheng Baochang;Cao Jianchun(Kunming University of Science and Technology, Department of Materials Science and Engineering, Kunming 650093);RESEARCH AND PROGRESS IN MECHANICAL ALLOYING[J];POWDER METALLURGY TECHNOLOGY;1999-04
5 Wang Erde, Liu Jinglei, Liu Zuyan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001);The Research Progression on the Kinetics of Extension Solid Solubility Induced by Mechanical Alloying[J];Powder Metallurgy Technology;2002-02
6 Wang Chengguo,Wu Jun,Liu Yuxian and Yang Junfa(Shandong University of Tehnology,250061);Effect of Process Control Agent on Mechanical Alloying of Fe C Ti Alloy Powder[J];POWDER METALLURGY TECHNOLOGY;1997-04
7 ZHOU Lanzhang;GUO Jianting;QUAN Mingxiu(Institute of Metal Research,The Chinese Academy of Sciences,Shenyang 110015);FORMATION MECHANISM OF NiAl/TiC NANOCOMPOSITE BY MECHANICAL ALLOYING[J];ACTA METALLRUGICA SINICA;1997-11
8 YANG Junyou; WU Jiansheng; ZENG Zhenpeng(The Open Laboratory of Education Ministry for High Temperature Materials and High Temperature Tests,Shanghai Jiaotong University, Shanghai 200030)Correspondent: YANG Junyou, postdoctoral research,Tel: (021)62812440;INVESTIGATION ON THE DEFORMATION AND ENERGY TRANSFER OF POWDERS DURING MECHANICAL ALLOVING[J];ACTA METALLRUGICA SINICA;1998-10
9 LIU Lin; QIN Yong(Institute of Solid Stale Physics, Chinese Academy of Sciences,Hefei 230031);EFFECT OF MILLING ENERGY ON MECHANICAL ALLOYING OF Mo-Si POWDER MIXTURE[J];ACTA METALLRUGICA SINICA;1996-04
10 Wang Jingtang,Shen Tongde;Progress in the Study of Mechanical Alloying[J];Physics;1993-08
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved