Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Aeronautical Materials》 2011-06
Add to Favorite Get Latest Update

Hot Deformation Behavior of 23Co14Ni12Cr3MoE Ultra-High Strength Steel

WANG Chun-xu1,LIU Xian-min1,TIAN Zhi-ling2,WANG Rui3,LI Jian-xin3 (1.Institute for Structural Materials,Central Iron and Steel Research Institute,Beijing 100081,China;2.China Iron & Steel Research Institute Group,Beijing 100081,China;3.FuShun Special Steel Co.,Ltd,Fushun 113001,Liaoning China)  
The hot compression deformation behaviors of secondary hardening ultra-high strength 23Co14Ni12Cr3MoE steel with high strength and toughness were investigated by use of Gleeble-3800 simulator at the temperature range of 1123K to 1423K and at the strain rate of 0.5~10s-1.The corresponding flow curves were determined and hot deformed microstructures were observed.The results show that the flow stress and peak strain increase with increasing strain rate or decreasing deformation temperature.At true strain 0.8 and the strain rate of 0.5~10s-1,the temperature of full dynamic recrystallization increase with the strain rate rising.When the strain rate is 10s-1,the deformation temperature is beyond 1373K,the full dynamic recrystallization is occurred.The hot deformation activation energy Q of steel is 421.6kJ/mol,and the hot deformation equation is derived based on the experiments.
【CateGory Index】: TG142.15
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 KANG Feng1,2,YANG Echuan3,LIN Jun1,2,HU Chuankai1,2, SHU Dayu1,2,NING Haiqing1,2(1 National Research and Application Center of Precise Forming,Chongqing 400039;2 No.59 Research Institute of China Ordnance Industry,Chongqing 400039;3 Chongqing Aotomobile Institute Chongqing University of Technology,Chongqing 400054);Study on Hot Deformation Behavior of High Strength Construction Steel 34CrNiMo6 for Crankshafts[J];Materials Review;2013-04
2 LI Bo;PAN Qing-lin;ZHANG Zhi-ye;LI Chen;YIN Zhi-min;School of Materials Science and Engineering,Central South University;The Key Laboratory of Nonferrous Materials Science and Engineering(Ministry of Education),Central South University;;Hot Deformation Behavior and Microstructure of Al-Zn-Mg Alloy Containing Sc During Hot Compression at Elevated Temperature[J];Journal of Materials Engineering;2013-11
3 HAO Xue-long;ZHANG Dong-hui;LIU Jian-hua;SUN Ze-ming;National Center of Analysis and Testing for Non-ferrous Metals & Electronic Materials,General Research Institute for Nonferrous Metals;Key Laboratory of Aerospace Materials and Performance,Ministry of Education,School of Materials Science and Engineering,Beihang University;;Influence Law of Pre-Corrosion on AF1410 Steel Fatigue Life[J];Journal of Aeronautical Materials;2013-05
【Citations】
Chinese Journal Full-text Database 4 Hits
1 LI Jie,SUN Feng,LI Chun-zhi,GUO Feng,LI Zhi,YAN Ming-gao(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Analysis of Strengthening Precipitates of High Co-Ni Ultra-high Strength Steel[J];Journal of Materials Engineering;2009-07
2 ZHAO Zhenye(Institute of Aeronautical Materials, Beijing 100095, China);Studing status on the secondary hardening phenomenon in ultra-high strength steels[J];Journal of Aeronautical Materials;2002-04
3 LI Jie,Li Chun-zhi,GUO Feng,LI Zhi,YAN Ming-gao(Beijing Institute of Aeronautical Materials,Beijing 100095,China);HRTEM Study of Strengthening Precipitates of Secondary Hardening Ultra-High Strength Steel[J];Journal of Aeronautical Materials;2008-04
4 HU Zheng fei 1, WU Xing fang 1, WANG Chun xu 2 (1. University of Science and Technology Beijing, Beijing 100083, China; 2. Central Iron & Steel Research Institute, Beijing 100081, China);Recent Status of Enriched CoNi Ultra-High Strength Steel with Secondary Hardening[J];Journal of Iron and Steel Research;2001-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 FAN Chang-gang1,2,DONG Han1,2,SHI Jie1,2,LIU Yan-lin3,YONG Qi-long2,HUI Wei-jun2,WANG Mao-qiu2,WENG Yu-qing2,4(1.Central Iron and Steel Research Institute,Beijing 100081,China;2.National Engineering and Research Center of Advanced Steel Technology,Beijing 100081,China;3.Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China;4.The Chinese Society for Metals,Beijing 100711,China);Microstructure and mechanical properties of 2200 MPa grade ultra-high strength low alloy steels[J];Ordnance Material Science and Engineering;2006-02
2 WANG Liu ding (Northwestern Polytechnical University, Xi′an 710072,China);Investigation of Continuous Transformation and Austenitic Reverted Transition for 23CoNi Steel with High Strength and Fracture Toughness[J];JOURNAL OF MATERIALS ENGINEERING;1999-12
3 GU Li-xin, JIN Jian-jun (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effects of Tempering Temperature on Microstructure and Mechanical Properties of 1Cr15Ni4Mo3N Steel[J];Journal of Materials Engineering;2007-01
4 LI Jie,LI Zhi,YAN Ming-gao(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Development of High-alloy Ultra-high Strength Steel[J];Journal of Materials Engineering;2007-04
5 GUO Feng1,LI Jie1,LI Zhi1,WANG Jun-li1,GU Li-xin1,WANG Rui2(1 Beijing Institute of Aeronautical Materials,Beijing 100095,China;2 Fushun Special Steel Co.Ltd.,Fushun 113001,Liaoning,China);SEM In-situ Observations to Crack in Rare-earth Inclusions in AerMet100 Steel Under Stretch Tension[J];Journal of Materials Engineering;2008-12
6 LI Jie,SUN Feng,LI Chun-zhi,GUO Feng,LI Zhi,YAN Ming-gao(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Analysis of Strengthening Precipitates of High Co-Ni Ultra-high Strength Steel[J];Journal of Materials Engineering;2009-07
7 GENG Ping; QIAN Cunfu; CHAO Yuesheng; LIN Jinxin; ZENG Meiguang (College of Science, Northeastern University, Shenyang 110006)(To whom correspondence should be addressed);MOSSBAUER STUDY ON AGEING PROCESS OF HIGH STRENGTH HIGH FRACTURE TOUGHNESS STEEL G99[J];CHINESE JOURNAL OF MATERIAL RESEARCH;1999-01
8 HU Zhengfei**WU Xingfang (Department of Material Physics, University of Science and Technology, Beijing 100083)WANG Chunxu(Central Iron and Steel Research Institute, Beijing);PROPERTIES AND MICROSTRUCTURE OF ISOTHERMAL TEMPERED HIGH CoNi ALLOY[J];Chinese Journal of Material Research;2002-03
9 SONG Ge1,2,LI Jian-feng1,2,SUN Jie1,2,ZHANG Wen-guang3 (1.School of Mechanical Engineering,Shandong University,Jinan 250061,China; 2.Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University,Jinan 250061,China; 3.CAC Chengdu Aircraft Industrial(Group) Co.,Ltd.,Chengdou 610092,China);Wear mechanism in cutting AF1410 ultrahigh strength steel with cemented carbide tool[J];Materials Science and Engineering of Powder Metallurgy;2010-06
10 CHEN Keming SU Jie LI Rong WENG Yuqing (Central Iron and Steel Research Institute) WANG Jianzhi (Sichuan Chuantou Great Wall Special Steel (Group) Co., Ltd.);ALLOY DESIGN OF COBALT-FREE SECONDARY HARDENING ULTRA-HIGH STRENGTH STEEL[J];IRON AND STEEL;2000-08
China Proceedings of conference Full-text Database 1 Hits
1 Chen Jiayan Su Jie Gao Yinlu Li Rong (Central Iron and Steel Research Institute);ON THE REMAINING AUSTENITE OF G50 STEEL[A];[C];2001
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LIU Jian-hua,HAO Xue-long,LI Song-mei,YU Mei,WANG Zong-wuKey Laboratory of Aerospace Materials and Performance(Ministry of Education of China),School of Materials Science and Engineering,Beihang University,Beijing 100191,China;Corrosion electrochemical behavior of electron beam welding joints of AF1410 steel[J];Journal of University of Science and Technology Beijing;2010-11
2 LIU Jian-hua~1, SHANG Hai-bo~2, TAO Bin-wu~1, LI Song-mei~1(1 School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China;2 Shenyang Airplane Manufacture Company, Shenyang 110041,China);Corrosion Behavior of High Strength Steels 0Cr18Ni5 and AF1410[J];Journal of Materials Engineering;2004-08
3 LI Xiong, ZHANG Hong-bing, RUAN Xue-yu, LUO Zhong-hua, ZHANG Yan(Department of Plasticity Technology, Shanghai Jiao Tong University,Shanghai 200030, China;Department of Materials Engineering,Shanghai Institute of Technology, Shanghai 200235, China;StateKey Laboratory for Advanced Metals and Materials, University ofScience & Technology Beijing, Beijing 100083, China);Analysis and Modeling of Flow Stress of 40Cr Steel[J];Journal of Materials Engineering;2004-11
4 LIAO Shu-lun1,ZHANG Li-wen1,YUE Chong-xiang1,GUO Shu-qi2,ZHEN Yu2(1 State Key Laboratory for Materials Modification,Dalian University of Technology,Dalian 116023,Liaoning,China;2 Dongbei Special Steel Group,Dalian 116031,Liaoning,China);Research on Thermal Deformation Behavior and Model of Flow Stress of GCr15 Steel[J];Journal of Materials Engineering;2008-04
5 LI Hong-en1,SHA Ai-xue2(1 Shenyang Aircraft Design & Research Institute,Shenyang 110035,China;2 Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effects of Hot Process Parameters on Flow Stress and Microstructures of TC18 Titanium Alloy[J];Journal of Materials Engineering;2010-01
6 ZHAO Hai-jun~1,JIN Ping~2,LIU Wen-lin~1,YANG Xiao-hua~21.Postgraduate Team of Naval Aeronautical Engineering Institute,Yantai 264001;2.Qingdao Branch of Naval Aeronautical Engineering Institute,Qingdao 266041;RESEARCH ON A MODEL OF THE INFLUENCE COEFFICIENT FOR PRE-CORROSION FATIGUE LIFE[J];Corrosion Science and Protection Technology;2006-04
7 DAI Qi-feng,SONG Ren-bo,GUAN Xiao-xia(School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China);Microstructure and Properties of Ultra-high Strength Ferrite-martensite Dual Phase Steel Tested Under Dynamic Tensile Conditions[J];Journal of Materials Engineering;2013-04
8 HAO Xue-long,LIU Jian-hua,LI Song-mei,YU Mei,WANG Zong-wu(School of Materials Science and Engineering,Beihang University,Beijing 100191,China);Effect of Neutral Salt Spray Precorrosion on Fatigue Life of AF1410 Steel[J];Journal of Aeronautical Materials;2010-01
9 ZANG Jin-xin1,ZHENG Lin-bin2,ZHANG Kun1,TAO Le-xiao3(1.Beijing Institute of Aeronautical Materials,Beijing 100095,China;2.Chengdu Aircraft Industrial Group Co.LTD,Chengdu 610092,China;3.Taiyuan University of Science and Technology,Taiyuan 030024,China);Flow Stress Behavior of a New High Strength Al-Zn-Mg-Cu Alloy during Hot Compression Deformation[J];Journal of Aeronautical Materials;2011-03
10 CHEN Qun-zhi1,YANG Rui-qin1,LI Guo-yuan2,WANG Yu-ya1(1.Beijing Aeronautical Technology Research Center,Beijing 100076,China;2.Harbin Engineering University,Harbin 150001,China);Influence of Corrosion on Fatigue Life of 30CrMnSiNi2A Steel Structure[J];Equipment Environmental Engineering;2007-05
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 WU Huanchun;YANG Bin;ZHOU Guohua;State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing;School of Physical Science and Technology,Yichun University;;Effect of Hot Deformation on the Microstructure and Mechanical Properties of 316LN Austenitic Stainless Steel[J];Materials Review;2014-16
【Secondary Citations】
Chinese Journal Full-text Database 5 Hits
1 LI Jie,LI Zhi,YAN Ming-gao(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Development of High-alloy Ultra-high Strength Steel[J];Journal of Materials Engineering;2007-04
2 Zhao Zhenye Zhong Bingwen;A STUDY OF MECHANISM OF OVERAGE BEHAVIOR IN A SECONDARY HARDENING STEEL[J];Journal of Aeronautical Matericals;1988-02
3 ZHAO Zhenye1,LI Chunzhi1,LI Zhi1,LIU Tianqi1, ZHI Minxue1,ZHU Jieyuan1,SUN Jiguang2(1.Beijing Institute of Aeronautical Materials, Beijing 100095,China; 2.Beijing Institute of nonferrous Metals, Beijing 100088,China);Study on the strengthening phase in a ultra-high strength stainless gear steel[J];Journal of Aeronautical Materials;2003-01
4 LI Jie,Li Chun-zhi,GUO Feng,LI Zhi,YAN Ming-gao(Beijing Institute of Aeronautical Materials,Beijing 100095,China);HRTEM Study of Strengthening Precipitates of Secondary Hardening Ultra-High Strength Steel[J];Journal of Aeronautical Materials;2008-04
5 LI CHUN-ZHI;A USEFUL METHOD FOR INDEXING ELECTRON DIFFRACTION PATTERNS[J];Acta Physica Sinica;1979-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved