Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Aeronautical Materials》 2013-03
Add to Favorite Get Latest Update

Influence of Shot-Peening Coverage on Surface Integrity of TC4 Titanium Alloy

WANG Xin1,LI Si-qing1,MENG Zhen-wei2,TANG Zhi-hui1(1.Beijing Institute of Aeronautical Materials,Beijing 100095,China;2.Shenyang Liming Aero-Engine(Group) Corporation Ltd.,Shenyang 110043,China)  
TC4 titanium alloy was employed to investigate the effect of shot-peening coverage(SPC) on surface integrity,such as surface morphology,surface roughness,residual stress and microstructure after 200℃/1h heat treatment.The results show that the average roughness Ra,root-mean-square roughness Rq and the value of compressive residual stress increase with the rise of SPC.Dislocation movement and crystal self-coordinating are observed in 300% SPC after 200℃/1h heat treatment due to temperature and inner-stress,which causes the relaxation of residual stress,and more over,the relaxation is not observed in 100% SPC after 200℃/1h heat treatment.
【CateGory Index】: TG668
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 8 Hits
1 WANG Qiang,WANG Xin,GAO Yu-kui,SONG Ying-gang(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effect of Strengthened Hole on the Fatigue Life of TC18 Titanium Alloy[J];Journal of Materials Engineering;2011-02
2 Gao Yukui (Institute of Aeronautical Materials, Beijing 100095, China);Residual Compressive Stress Field in TC18 Ultra-high Strength Titanium Alloy by Shot Peening[J];Rare Metal Materials and Engineering;2004-11
3 Gao Yukui (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effect of Shot-Peening on Microstructure of TC4 Titanium Alloy[J];Rare Metal Materials and Engineering;2010-09
4 Zhao Zhenye (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Investigation and Development Status of the Application Technology to Improve Fatigue Behavior of High Strength Alloys[J];Engineering Science;2005-03
5 SONG Ying-gang,GAO Yu-kui,LU Feng,ZHAO Zhen-ye(Beijing Institute of Aeronautic Materials,Beijing,100095,China);Investigation of microstructure of GH4169 alloy surface layer after shot peening[J];Heat Treatment of Metals;2010-09
6 WANG Ren-zhi(Institute of Aeronautical Materials,Beijing 100095,China);BASIC KNOWLEDGE OF RESIDUAL STRESS DETERMINATION——LECTURE No.5 REVIEW ON THE RELATIONSHIP BETWEEN SURFACE INTEGRITY AND FATIGUE FRACTURE RESISTANCE OF METALLIC MATERIALS AND COMPONENTS[J];Physical Testing and Chemical Analysis(Part A:Physical Testing);2007-10
7 Luan Weiling Tu ShandongEast China University of Science & Technology, Shanghai, 200237;Recent Trends on Surface Modification Technology of Shot Peening[J];China Mechanical Engineering;2005-15
8 ZHANG Xiao-hua,LIU Dao-xin,TANG Chang-bin,GAO Guang-rui (School of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,China);Synergistic improving fretting fatigue resistance of Ti alloy at elevated temperature by duplex surface modification[J];The Chinese Journal of Nonferrous Metals;2006-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Yi-liang,ZHANG Zhen-hai,LIU Jin-yan (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Distribution of Residual Stress Along Depth Under Different Shot Peening Technoloties[J];Journal of Beijing University of Technology;2009-12
2 WANG Ren-zhi(Beijing Institute of Aeronautical Materials,Beijing 100095);Review on the Residual Stress Through the Course of Manufacture Technique for the Cold Formed Circular Coil Spring[J];China Surface Engineering;2006-06
3 WANG Ren-zhi (Laboratory of Number 4,Beijing Institute of Aeronautical Materials,Beijing 100095);Surface Integrity and Fracture Resistance of Engineering Metallic Materials and Components[J];China Surface Engineering;2011-05
4 WANG Xin,CAI Jian-ming,WANG Qiang,SONG Ying-gang,LU Feng (Laboratory of Number 5,Beijing Institute of Aeronautical Material,Beijing 100095);Effect of Shot Peening Surface Coverage on the Fatigue Property in Ti60 High-temperature Titanium Alloy[J];China Surface Engineering;2011-05
5 Wang Qiang1,CHEN Xue-mei2,ZHANG Wen-guang2,WANG Xin1 (1.Beijing Institute of Aeronautical Material,Beijing 100095;2.Chengdu Aircraft Industry Corporation,Chengdu 610092);Residual Stress Induced by Cold Expansion With Sleeve Process of A-100 Steel[J];China Surface Engineering;2011-05
6 WANG Xin a,ZHONG Ping b,LU Feng a (a.Laboratory of Number 5,b.Laboratory of Number 3,Beijing Institute of Aeronautical Material,Beijing 100095);Effect of Shot Peening on the Fatigue Property of 12Cr Martensitic Refractory Steel[J];China Surface Engineering;2012-02
7 WANG Qiang1,ZHANG Zhi-gang2,GAO Yu-kui1,SONG Ying-gang1,WANG Xin1,TIAN Ya1(1.Beijing Institute of Aeronautical Materials,Beijing 100095,China;2.AVIC Landing Gear Advanced Manufacturing Corporation,Hanzhong 723200,China);Effect of Shot-Peening Material and Grit Size on the Surface Roughness of 300M Steel[J];Materials Protection;2011-07
8 WANG Xin,WANG Qiang,SONG Ying-gang,GAO Yu-kui,LU Feng,RU Ji-gang(Beijing Institute of Aeronautical Material,Beijing 100095,China).;Effect of Ceramic Shot-Peening on Fatigue Behavior of Aluminum Alloy[J];Materials Protection;2011-09
9 Li Jinkui Yao Mei (Harbin Institute of Technology)Wang Renzhi (Institute of Aeronautical Materials, Beijing);The Investigation on the Law of the Change between the Shot Peening Parameters and Their Dependence with the Mechanical Behavior of Peened Materials[J];Journal of Materials Engineering;1988-06
10 Wang Renzhi (Institute of Aeronautical Materials, Beijing);The Development of Shot Peening Technique in Our Country[J];Journal of Materials Engineering;1989-01
China Proceedings of conference Full-text Database 7 Hits
1 JIANG Tao,LIU Han-yang,LIU Jie,HOU Xue-qin (Beijing Institute of Aeronautical Materials,Failure Analysis Center of AVIC, Touchstone Testing Innovation Cooperation,Beijing 100095,China);Fracture failure analysis of 30CrMnSiA steel lifting lug[A];[C];2011
2 LI Ying~1 ZHANG Li-xin~2 (Failure Analysis Center,Beijing Institute of Aeronautical Materials,Beijing 100095,China; Electric Operation Office of Shang zhi,Shang zhi 150622,China);Failure Analysis on Teeth Break of Bevel Gear in Some Special Vehicle[A];[C];2007
3 Zou Jinwen Wang Yu Wang Renzhi (National Key Laboratory of Advanced High Temperature Structural Materials,BIAM,Beijing 100095,China);Effects of Surface Deformation Strengthening on Microstructure and Property of P/M Superalloys[A];[C];2007
4 GAO Yu-kui (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Shot-peened surface residual stress relaxationduring fatigue for ultra-high strength steel[A];[C];2007
5 LI Chong-gui TIAN Wei YANG Yong WANG You (Dept.of Materials Science,Harbin Institute of Technology,Harbin 150001,China);Microstructure and properties of Al_2O_3-13wt%TiO_2 coatings fabricated by plasma spraying and laser remelting on titanium alloy[A];[C];2007
6 QI Li-chun,HUANG Li-jun,HUANG Xu,LI Zhi-yan (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Effect of surface machining state on fatigue property of Ti-1023 titanium alloy[A];[C];2010
7 WANG Xin,HUANG Zhaohui,TANG Zhihui,SONG Yinggang (Beijing institute of aeronautical material,Beijing 100095,China);Influence of Shot-Peening on the Surface Integrity of DD5 Single Crystal Superalloy[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Wang Renzhi; Ru Jilai;Several Problems on the Surface Strengthening of Valve Spring in the Automobile Internal-Combustion Engine[J];CHINA SURFACE ENGINEERIGN;2000-02
2 Li Xiangbin Wang Renzhi Yin Yuanfa (Institute of Aeronautical Materials, Beijing);Investigation on the Shot Peening of a New High Strength Steel[J];Journal of Materials Engineering;1991-03
3 Ye Wujun Zang Wei Ding Chuanfu Zao Zenye (Institute of Aeronautical Materials , Beijing );Study on Spectrum Load Fatigue Behaviors, Fracture Mechanism and Fractography of Two Ultra - High Strengh Steels[J];Journal of Materials Engineering;1992-02
4 GAO Yu kui , YIN Yuan fa, LI Xiang bin and LIU Tian qi (Institute of Aeronautical Materials, Beijing 100095, China);Influence of Shot Peening on Fatigue Property for 0Cr13Ni8Mo2Al Steel[J];Journal of Materials Engineering;2001-12
5 WEN Ai-ling,WANG Sheng-wu,YANG Jun-yong,REN Rui-ming(School of Mechanic Engineering,Dalian Jiaotong University,Dalian 116028,China);Influence of High-energy Peening Surface Nano-crystallization on Fatigue Life of Pure Titanium[J];Development and Application of Materials;2007-04
6 Zhang Jianbin 1, Ma Qin 1, Fan Ding 1, Zhou Qi 1, Wang Jingyi 2 (1 College of Materials & Engineering, Gansu University of Technology, Lanzhou 730050, China) (2 Department of Materials & Engineering, Xi'an Institute of Technology, Xi'an 710032, C;Investigation on the Shot Peening of Commercial Pure-Titanium[J];Rare Metal Materials and Engineering;2001-05
7 Gao Yukui (Institute of Aeronautical Materials, Beijing 100095, China);Residual Compressive Stress Field in TC18 Ultra-high Strength Titanium Alloy by Shot Peening[J];Rare Metal Materials and Engineering;2004-11
8 Huang Lifeng, Sun Wenru, Guo Shouren, Hu Zhuangqi (Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);Twinning Mechanism of Inconel 718 Alloy During Creeping[J];Rare Metal Materials and Engineering;2007-11
9 Liu Yang1, Wang Lei1, Huo Jianping1, Qiao Xueying2, Wang Yanqing2 (1. The Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Shenyang 110004, China) (2. Central Iron & Steel Research Institute, Beijing 100081, China);Effect of Electric Field Treatment on Intercrystalline Corrosion of Nickel-Based Superalloy[J];Rare Metal Materials and Engineering;2008-09
10 YUE Tai-wen,YAO Ze-kun,WU Ze,NING Yong-quan,GUO Hong-zhen,GUO Yan-li (School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Grain size and microstructure change of GH4133A during multiple heating hot-die forging[J];Forging & Stamping Technology;2008-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved