Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Aeronautica Et Astronautica Sinica》 2008-05
Add to Favorite Get Latest Update

Overviews of Technique Research Progress of Form Error Prediction and Error Compensation in Milling Process

Wan Min, Zhang Weihong(The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi'an 710072, China)  
It is very significant to investigate the milling mechanism in improving the accuracy and productivity of machining process. This article reviews the technique research progress of recent advancements in milling process. Emphasis is focused on the applications of numerical simulation technique and finite element method in error prediction and error control in milling process. Detailed reviews and comparisons are made on modeling methods for cutting force estimation, cantilever beam models for cutter deflection estimation, finite element methods for workpiece deflection estimation, calculating models for form error prediction, simulating models for material removal modeling and compensating models for form error reduction, etc. Some key techniques such as the crucial ideas, the mathematical algorithms and the simulation procedures involved in every concerned issue are discussed systematically. A perspective of the form error control techniques is also presented.
【Fund】: 国家自然科学基金(50435020);; 西北工业大学博士论文创新基金(CX200411);; 西北工业大学青年创新基金
【CateGory Index】: V261.23
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 Gao Xiang,Wang Yong School of Mechanical Engineering,Tianjin University of Commerce,Tianjin 300134,China;Research on High-speed Milling Technology in Thin-walled Workpieces[J];Tool Engineering;2009-08
2 Chen Weifang,Lou Peihuang,Chen Hua(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Active Compensation Methods of Machining Deformation of Thin-walled Parts[J];Acta Aeronautica Et Astronautica Sinica;2009-03
【Citations】
Chinese Journal Full-text Database 9 Hits
1 ZHENG Lian\|yu, WANG Shu\|chun (School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing\ 100083, China);APPROACHES TO IMPROVE THE PROCESS QUALITY OF THIN-WALLED WORKPIECE IN NC MACHINING[J];Acta Aeronautica Et Astronautica Sinica;2001-05
2 WANG Li-tao 1, KE Ying-lin 1, HUANG Zhi-gang 1, XU De 2, WU Qun 2 (1. The College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China) (2. NC Center of Cheng Du Aircraft Corporation, Chengdu 610092, China);Study on Residual Stress Produced in Milling of Aeronautic Structure[J];Acta Aeronautica Et Astronautica Sinica;2003-03
3 WAN Min, ZHANG Wei-hong (The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi'an 710072, China);Investigation on Cutting Force Modeling and Numerical Prediction of Surface Errors in Peripheral Milling of Thin-walled Workpiece[J];Acta Aeronautica Et Astronautica Sinica;2005-05
4 Wan Min,Zhang Weihong,Tan Gang(The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,School of Mechatronics,Northwestern Polytechnical University,Xi'an 710072,China);Efficient Simulation Model of Material Removal in Peripheral Milling of Thin-walled Workpiece[J];Acta Aeronautica Et Astronautica Sinica;2007-05
5 Zhang Zhihai Zheng Li Li Zhizhong Zhang Bopeng (Qinghua University);ANALYTICAL MODEL FOR END MILLING SURFACE GEOMETRICAL ERROR WITH CONSIDERING CUTTING FORCE/TORQUE[J];Chinese Journal of Mechanical Engineering;2001-01
6 Sun Jie Ke Yinglin (Zhejiang University) Wu Qun Xu De (Chengdu Aircraft Industrial Co.);STUDY ON KEY TECHNOLOGYIES OF STRAIGHTENING LARGE-SCALE INTEGRATED PARTS'DISTORTION DUE TO MACHINING[J];Chinese Journal of Mechanical Engineering;2003-08
7 HUANG Zhi-gang, KE Ying-lin, DONG Hui-yue(Institute of Production Engineering, Zhejiang University, Hangzhou 310027, China);Finite element model of milling process sequence forframe monolithic components[J];Journal of Zhejiang University(Engineering Science);2005-03
8 DONG Hui-yue,KE Ying-lin,CHENG Qun-lin (College of Mechanical and Energy Engineering,Zhejiang University,Hangzhou 310027,China);Finite element simulation and analysis of aluminum alloy three-dimensional milling[J];Journal of Zhejiang University(Engineering Science);2006-05
9 Kang Xiaoming 1 Sun Jie 2 Su Caimao 2 Ke Yinglin 2 1.Shanghai Jiaotong University,Shanghai,200030 2.Zhejiang University,Hangzhou,310027;Sources and Control of Machining Distortions in Large Integral Structures[J];China Mechanical Engineering;2004-13
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Yi-liang HUANG Hui-ru LI Xiang (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Research on Distribution of Turning Residual Stress[J];Journal of Beijing University of Technology;2006-07
2 Mei Zhongyi(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China)Gao Hong(Manufacture Engineering Department,Chengdu Aircraft Industrial Co.Ltd,Chengdu 610092,China)Wang Yunqiao(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Analyzing and controlling distortion of aircraft aluminium alloy structural part in NC machining[J];Journal of Beijing University of Aeronautics and Astronautics;2009-02
3 WANG Yong,GAO Xiang,KOU Jin-bao,CHEN Jun-feng(Tianjin University of Commerce,Tianjin 300314,China);Study on NC Machining Clamping Process for Thin-walled Package Based on ANSYS[J];Packaging Engineering;2007-03
4 JI Hong-yu (School of Mechanical & Electrical Engineering,Changzhou Institute of Technology,Changzhou 213002);Comparison of Large-scale Air-optimized Structure Design[J];Journal of Changzhou Institute of Technology;2008-03
5 WEI Zhao-cheng,WANG Min-jie,MA Ri-guangKey Laboratory for Precision & Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian 116024,China;An allowance scheduling strategy for cutting force regulation in peripheral milling[J];Journal of Dalian University of Technology;2008-06
6 QIN Guo-hua1,2 , ZHANG Wei-hong1 , WU Zhu-xi2 , LI Yang3 (1. Sino-French Laboratory of Concurrent Engineering, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China; 2. Department of Mechanical Engineering, Nanchang Institute of Aeronautical Technology, Nanchang, Jiangxi 330034, China; 3. Shaanxi Aeronautic Carbide Tool Company, Mianxian, Shaanxi 724200, China);ANALYSIS AND OPTIMIZATION OF WORKPIECE DEFORMATIONS BY MULTIPLE CLAMPING FORCES AND THE APPLICATION SEQUENCES[J];Engineering Mechanics;2006-S1
7 Lou Wenming Wu Jianjun Kang Yonggang;Investigation on Prediction Method of Surface Deformation of Thin-walled Workpiece in Peripheral Milling[J];Tool Engineering;2007-05
8 Yang Kai Bai Qingshun Liang Yingchun et al,Harbin Technological University,Harbin 150001,China;Numerical Simulation Study on Tool Wear for Micro-milling[J];Tool Engineering;2008-08
9 Gao Aihua Zheng Youyi,Lecturer,School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo,Henan,454000,China;Establishment of Orthogonal Cutting Finite Element Model and Its Key Technology[J];Tool Engineering;2009-03
10 TANG Guo-xing1,GUO Hun1,2,ZUO Dun-wen2,LU Ting3 (1.School of Mechnical & Electrical Engineering, Changzhou Institute of Technology, Changzhou Jiangsu 213302, China; 2.College of Mechnical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics , Nanjing 210016, China; 3. Department of Computer Science Technology, Nanyang Institute of Technology, Nanyang Henan 473000, China);Numerical Simulation of Machining Distortion of Residual Stress Relief for Aircraft Aluminum Components[J];Equipment Manufacturing Technology;2007-10
China Proceedings of conference Full-text Database 1 Hits
1 Qi Houjun1,a, Zhang Dawei1,b, Yan Bing2, Cai Yujun2 (1School of Mechanical Engineering, Tianjin University, Tianjin 300072, China) (2Tianjin Key Laboratory of High Speed Cutting and Precision Machining, Tianjin University of Technology and Education, Tianjin 300222, China);EFFECT OF PART-CUTTER DEFLECTION ON FLEXIBLE MILLING FORCE IN HIGH SPEED PERIPHERAL MILLING PROCESS[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 9 Hits
1 ZHENG Lian\|yu, WANG Shu\|chun (School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing\ 100083, China);APPROACHES TO IMPROVE THE PROCESS QUALITY OF THIN-WALLED WORKPIECE IN NC MACHINING[J];Acta Aeronautica Et Astronautica Sinica;2001-05
2 WANG Zengqiang,MENG Xiaoxian,REN Junxue,HU Chuangguo(Northwestern Polytechnical University,Xi'an 710072,China);A Scheme for the Compensation of Deformation Error in NC Machining of Thin-walled Complex Parts[J];Machine Tool & Hydraulics;2006-04
3 WU Kai 1, HE Ning 1, LIAO Wen-he 1, JIANG Cheng-yu 2 (1 Nanjing University of Aeronautics and Astronautics, Nanjing 210016; 2 Northwestern Polytechnical University, Xi′an 710072);Selection of Cutting Parameters in High Speed Milling of Thin-Walled Structure Components Based on the Machining Errors Control[J];Mechanical Science and Technology;2005-07
4 SUN Jie~1, LI Jian-feng~1, LI Fang-yi, JIA Xiao-dong~2(1. School of Mechanical Engineering, Shandong University, Jinan 250061, China) (2. School of Electromechanical Engineering, Shandong Institute of Architecture & Engineering, Jinan 250014, China);Research on key manufacturing process by finite element method[J];Journal of Shandong University (Engineering Science);2005-01
5 Kang Yonggang,Wang Zhongqi,Wu Jianjun,Jiang Chengyu (School of Mechatronic,Northwestern Polytechnical University,Xi′an 710072,China);Fast Prediction of Static Form Errors in Peripheral Milling of Thin-Walled Workpieces Using Real Cutting Depth[J];Journal of Northwestern Polytechnical University;2007-02
6 WANG Zhigang (Nanjing University of Aeronautics & Astronautics,Nanjing,China) HE Ning WU Kai JIANG Chengyu ZHANG Ping GONG Huimin CHEN Xuemei;Analysis and Control Approach for Machining Deflection of Thin-Walled Workpiece[J];China Mechanical Engineering;2002-02
7 Wu Kai He Ning Liao Wenhe Zhao Wei Nanjing University of Aeronautics and Astranautics,Nanjing,210016;Study on Machining Deformations and Their Control Approaches of the Thin-web in End Milling[J];China Mechanical Engineering;2004-08
8 AI Xing(Shandong University),et al;Progress and Prospect of High-speed Cutting Tool Material[J];Manufacturing Technology & Machine Tool;2001-08
9 ZHAO Wei,HE Ning,WU Kai (College of Mechanical and Electrical Engineering, NUAA,JS Nanjing, 210016,China);A NC Compensation Approach of Machining Aeronautical hin-Walled Workpiece by Tilting Tools[J];Jiangsu Machine Building & Automation;2002-05
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 Zheng Peng, Zheng Yuzhen (Beijing Institute of Aeronautical Materials, Beijing,100095) Wei Hui, Qian Yourong (Dept. No.1, Beijing University of Aeronautics and Astronautics, Beijing,100083);CHARACTERISTICS AND EFFECTS OF RESIDUAL STRESS DISTRIBUTED ALONG THE THICKNESS IN 2324 ALUMINUM ALLOY PLATE[J];Acta Aeronautica Et Astronautica Sinica;1996-03
2 Huang Zhigang Ke Yinglin Wang Litao (Department of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027) Xu De (Chengdu Aircraft Corporation, Chengdu 610092);STUDY ON PREDICTION OF THE PARTS'DISTORTION DUE TO MILLING MACHINING BASED ON ORTHOGONAL CUTTING SIMULATION[J];Chinese Journal of Mechanical Engineering;2004-11
3 Qin Minghao Ke Zunzhong Zhang Xiangjun Jiang Shouren Xu Yeyi ( Hefei University of Technology );STUDY ON STRAIGHTENING TECHNICAL THEORYOF SHAFTKIND IN EXACT STRALGHTENING PRESS[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1997-02
4 ZHANG Zhihai, ZHENG Li, LI Zhizhong, ZHANG Bopeng (Department of Precision Instrument and Mechanology, Tsinghua University, Beijing 100084, China);Milling force and torque analytical convolution model[J];JOURNAL OF TSINGHUA UNIVERSITY(SCIENCE AND TECHNOLOGY);2000-08
5 ZHENG Li, Steven Y.LIANG  , ZHANG Bopeng, XU Jiaqiu Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, China; Georgia Institute of Technology, School of Mechanical Engineering, Atlanta, 30332 0405,;Modelling of end milling surface error with considering tool machine workpiece compliance[J];JOURNAL OF TSINGHUA UNIVERSITY(SCIENCE AND TECHNOLOGY);1998-02
6 DONG Hui-yue,KE Ying-lin (College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China);Finite element simulation for optimal clamping scheme of thin-walled workpiece in milling process[J];Journal of Zhejiang University(Engineering Science);2004-01
7 Huang Zhigang(Zhejiang University, Hangzhou, China)Ke Yinglin Wang Litao;Study on Related Techniques for the Finite Element Method Simulation in Metal Cutting[J];China Mechanical Engineering;2003-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved