Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Aeronautica Et Astronautica Sinica》 2009-09
Add to Favorite Get Latest Update

Sensitivity Analysis of Parameters Affecting Milling Force in Plunge Milling of Titanium Alloy TC11

Yang Zhenchao,Zhang Dinghua,Yao Changfeng,Ren Junxue,Tian Weijun(Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xi'an 710072,China)  
To optimize the parameters of plunge milling of titanium alloys and provide an experimental basis for milling force control,mathematical models of three-direction milling forces for plunge milling of titanium alloy TC11 are built by three factors and four levels orthogonal experimental method,and multivariable linear regression method is used to conduct the numerical fitting.Based on these models,the absolute and relative sensitivities of three-direction milling force with respect to milling speed,feed per tooth and milling depth are analyzed.The effect of milling parameters on milling forces is studied.The results show that in plunge milling of titanium alloy TC11,the three-direction milling forces increase with increasing milling speed,feed per tooth and milling depth,but the influence degree is different.The z-direction milling force is more sensitive to all milling parameters variations than the x-direction and y-direction milling force.The three-direction milling forces are all more sensitive to milling depth than feed per tooth,least sensitive to milling speed.
【Fund】: 国家科技支撑计划重点项目(2008BAF32B10);; 教育部重大项目(309026);; 航空科学基金(2007ZE53061)
【CateGory Index】: V261.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 Zhai Yuansheng;Zhang Jijun;Hu Jingshu;Li Yufu;;Prediction of Cutting Force in Plunge Milling using Genetic Algorithm Toolbox[J];Tool Engineering;2014-04
2 Lin Qian;Ren Junxue;Li Xiangyu;Sun Dengke;;Experimental Study on GH4169 with High- effect Plunge Milling Process[J];Tool Engineering;2014-04
3 LIU Wei-wei,YANG Shuai,CAI Yuan-yuan(Key Lab of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education, Northwestern Polytechnical University,Xi'an 710072);Influence of Milling Parameters on Vibration during Thin-walled Blade Milling[J];Aviation Precision Manufacturing Technology;2012-03
4 ;Research on TC17 Titanium Alloy Surface Roughness and Parameters Sensitivity in High Speed Milling Process[J];Aeronautical Manufacturing Technology;2009-22
5 ;Fundamental Experiment Research in Compound and Efficient Powerful Milling Process for Small Curvature Blisk[J];Aeronautical Manufacturing Technology;2011-19
6 Ren Junxue,Liu Bo,Yao Changfeng,Shi Kai,Liang Yongshou,Luo Yuanfeng(The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology of Ministry of Education,Northwestern Polytechnical University,Xi′an 710072);On Plunge Milling Process Parameters Optimization for TC11 Titanium Alloy[J];Mechanical Science and Technology for Aerospace Engineering;2010-05
7 ;Research on Surface Roughness and Surface Topography of High-Speed Milling TB6 Titanium Alloy[J];Aeronautical Manufacturing Technology;2012-21
8 ;Application of Plunge-Milling Technology in NC Manufacturing[J];Aeronautical Manufacturing Technology;2013-04
9 ;Research Status of Plunge Milling Technology In NC Machining[J];Aeronautical Manufacturing Technology;2014-08
【Citations】
Chinese Journal Full-text Database 8 Hits
1 Wang Zengqiang Shan Chenwei Ren Junxue et al;Generating 4-Axis Plunge Roughing Paths for Open Blisks[J];Aeronautical Manufacturing Technology;2007-02
2 CHENG Qun-lin,KE Ying-lin,DONG Hui-yue(The State Key Lab of Fluid Power Transmission and Control,Zhejiang University,Hangzhong 310027,China);Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy[J];Acta Aeronautica Et Astronautica Sinica;2006-04
3 SONG Jun,LU Zhen-zhou (School of Aeronautics,Northwestern Polytechnical University,Xi′an 710072,China);A New Reliability Sensitivity Analysis Method[J];Acta Aeronautica Et Astronautica Sinica;2006-05
4 He Hongni,Lu Zhenzhou(School of Aeronautics,Northwestern Polytechnical University,Xi'an 710072);Sensitivity Analysis for Fuzzy Random Reliability[J];Acta Aeronautica Et Astronautica Sinica;2008-02
5 Zhou Kang Tong Xiaojun Liu WenbinZhou Kang Assco.Prof.;Department of Mathematics and Physics,Wuhan Polytechnic University,Wuhan 430023,China.;Sensitivity analysis of source management[J];Journal of Huazhong University of Science and Technology(Nature Science Edition);2006-08
6 Hu Chuangguo Zhang Dinghua Ren Junxue Wang Zengqiang The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Xi’an, 710072;Research on the Plunge Milling of Blisk Tunnel[J];China Mechanical Engineering;2007-02
7 Ren Junxue Tian Weijun Yao Changfeng Jiang Zhennan The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xi'an,710072;Experimental Study on the Overall Structure of Titanium Alloy with High-effect Plunge Milling Process[J];China Mechanical Engineering;2008-22
8 QI Wen-guo~(1,2),SUN Jian-jun~2,ZHAO Jian-bo~1,QIN Xu-da~1(1.School of Mechanical Engineering,Tianjin Univ.,Tianjin 300072,China;2.School of Mechanical and(Electronic) Engineering,Tianjin Polytechnic University,Tianjin 300160,China);A Mathematical Model and Analysis of Plunge Milling Force on Aluminum Alloy[J];Modular Machine Tool & Automatic Manufacturing Technique;2007-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GAO Zong-zhan1,HE Xin-dang1,JIANG Zhi-feng2,YUE Zhu-feng1(1 Department of Engineering Mechanics,Northwestern Polytechnical University,Xi'an 710072,China;2 Jiangxi Hongdu Aviation Industrial Shareholding Co.,Ltd.,Nanchang 330024,China);Reliability Analysis of Fatigue Life for Polymethyl Methacrylate with Edge Joint Structure[J];Journal of Materials Engineering;2010-05
2 JI Hong-yu (School of Mechanical & Electrical Engineering,Changzhou Institute of Technology,Changzhou 213002);Comparison of Large-scale Air-optimized Structure Design[J];Journal of Changzhou Institute of Technology;2008-03
3 YAN Ming,ZHANG Yi-min,SUN Zhi-li,LI He(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China.);Monte Carlo Method for Computing of Reliability and Sensitivity of Mechanical Components with Dependent Failure Modes[J];Journal of Northeastern University(Natural Science);2011-06
4 WANG Bo1,2,LIU Xian-li2,DU Jin-cheng1,XU Lei1,YUE Cai-xu2(1.Harbin Electric Machinery Company Limited,Harbin 150040,China;2.Harbin University of Science and Technology,Harbin 150080,China);Research on Integral CNC Machining Process and Programming Technology for Runner of Pelton Turbine[J];Large Electric Machine and Hydraulic Turbine;2010-03
5 Chu Wangwei(Chengdu Aircraft Industrial(Group)Co.Ltd,NC Machining Workshop,Chengdu 610000,China)Mou Wenping Gong Qinghong et al;Research on Efficiency Milling of Ti Alloy Aircraft Structure[J];Tool Engineering;2008-08
6 Zhai Yuansheng;Zhang Jijun;Hu Jingshu;Li Yufu;;Prediction of Cutting Force in Plunge Milling using Genetic Algorithm Toolbox[J];Tool Engineering;2014-04
7 Long Guorong Ouyang Cheng M a Jun (Hongdu Aviation Industry Group,Nanchang,Jiangxi,330024);The Analysis and Control of Deformation in Fabrication of L15 Aircraft Integral Structure Part[J];Trainer;2010-04
8 HUANG Jiu-chao,LIU Xian-li,YANG Shu-cai,et al.(Harbin University of Science &Technology,Harbin 150080);Research on 5-axis Machining Processing Method for Open Blisk Based on UG[J];Aviation Precision Manufacturing Technology;2012-03
9 GUO Kai,LIU Xian-li,CHENG Yao-nan,et al.(Harbin University of Science &Technology,Harbin 150080);Research on Key Process Technology on Machining Open Whole Impeller[J];Aviation Precision Manufacturing Technology;2012-03
10 ;Analysis and Modeling of Plunge Milling Force on PH13-8Mo[J];Aeronautical Manufacturing Technology;2010-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 LI Xin~(1,2) ZHAO Wei-gang~2 LU Shi-qiang~2 WANG Ke-lu~2 (1.Institute of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China; 2.Institute of Materials Science and Engineering,Nanchang Institute of Aeronautical Technology,Nanchang 330034,China);Investigation on hot deformation behavior and microstructure of TC11 alloy at large strain during β-phase[J];Ordnance Material Science and Engineering;2007-03
2 QIN Xu-da~1 ZHAO Jian-bo~1 ZHANG Jian-gang~1 LIU Huan-ling~1 Tom O Muller~2 Ni Wang-yang~2 Liu Yi-xiong~2 1.School of Mechanical Engineering,Tianjin university Tianjin 300072,China; 2.Kennametal Inc.Latrobe,PA 15650,USA;Analysis and Modeling About Milling Force in Plunge Milling for Ti-6AI-4V Based on Regression[J];Journal of Beijing University of Technology;2006-08
3 WANG Mei-jiao,MENG Xiang-jun,LIAO Zhi-qian,LI Shi-kai(Luoyang Ship Materials Research Institute,Luoyang 471039,China);Present State of Research on Ti-1023 Titanium Alloy[J];Development and Application of Materials;2009-05
4 WANG Dian-long~*,CHEN Jin-ping (School of Mech.Eng.,Dalian Univ.of Technol.,Dalian 116024,China);Prediction of cutting force using BP artificial neural network[J];Journal of Dalian University of Technology;2005-06
5 ;Manufacturing Method of Two-dimensional Impeller with Numerical-controlled Slot Milling[J];Compressor,Blower & Fan Technology;2006-04
6 Yang Qiuping Wang Weiping;Comparative Study on Different Modeling Methods for Predicting Cutting Force[J];Tool Engineering;2002-12
7 Tang Aijun Ma Hailong;Influence Factor on Characteristic of Chatter in Cutting Process[J];Tool Engineering;2007-08
8 Chu Wangwei(Chengdu Aircraft Industrial(Group)Co.Ltd,NC Machining Workshop,Chengdu 610000,China)Mou Wenping Gong Qinghong et al;Research on Efficiency Milling of Ti Alloy Aircraft Structure[J];Tool Engineering;2008-08
9 SUN Jing,CAI Yong-lin(Beijing Jiaotong University,Beijing 100044,China);Non-isoparametric Tool-path Planning Based on Plunge Milling[J];Equipment Manufacturing Technology;2009-07
10 ;Study on High Speed Milling Surface Integrity of Ti Alloy TC4[J];Aeronautical Manufacturing Technology;2001-01
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 WEN Xue-long;WANG Chao;GONG Ya-dong;CHENG Jun;School of Mechanical Engineering & Automation,Northeastern University;;Surface Roughness and Surface Topography of Micro-Grinding Soda-Lime Glass[J];Journal of Northeastern University(Natural Science);2014-05
2 Zhai Yuansheng;Zhang Jijun;Hu Jingshu;Li Yufu;;Prediction of Cutting Force in Plunge Milling using Genetic Algorithm Toolbox[J];Tool Engineering;2014-04
3 Lin Qian;Ren Junxue;Li Xiangyu;Sun Dengke;;Experimental Study on GH4169 with High- effect Plunge Milling Process[J];Tool Engineering;2014-04
4 ;Effect of Milling Parameters on Surface Roughness in High Speed Milling GH4169[J];Aeronautical Manufacturing Technology;2012-12
5 ;Research Status of Plunge Milling Technology In NC Machining[J];Aeronautical Manufacturing Technology;2014-08
6 DONG Hong-liang;XIN Hong-min;SHI Yao-yao;The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University;;Design on Multi-Mill Machine of Blisk[J];Machinery Design & Manufacture;2014-05
7 Liu Weiwei Li Feng Ren Junxue Yu Yuan The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education,Northwestern Polytechnical University,Xi'an,710072;Research on Surface Roughness Based on SPSO in High Speed Milling of GH4169[J];China Mechanical Engineering;2011-22
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 WU Jiancheng,WU Jianguo,WU Yage(Dept.of Naval Architecture and Civil Eng.,East China Shipbuilding Institute,Zhenjiang Jiangsu 212003,China);An Adaptive Important Sampling Method Based on Markov Chain Sample Simulation Algorithm[J];Journal of East China Shipbuilding Institute(Natural Science Edition);2003-03
2 ;Machine and Tool Used for Machining Ti Alloy Parts——Summary About Russian Machining Technology of Ti Alloy Parts[J];Aeronautical Manufacturing Technology;2001-S1
3 ;Study on Surface Temperature Field of Ti Alloy TC4 During High Speed Milling[J];Aeronautical Manufacturing Technology;2002-01
4 REN Jun-xue, ZHANG Ding-hua, WANG Zeng-qiang, LIU Wei-wei, WANG Wen-hugy, Education Ministry of China, Northwestern Polytechnical University, Xi′an710072, China);Research on the NC Machining Technique of Blisk[J];Acta Aeronautica Et Astronautica Sinica;2004-02
5 HUANG Zhi-gang, KE Ying-lin, Wang Li-tao (College of Mechanical & Energy Engineering, Zhejiang University, Hangzhou310027, China);Coupled Thermo-mechanical Model for Metal Orthogonal Cutting Process and Finite Element Simulation[J];Acta Aeronautica Et Astronautica Sinica;2004-03
6 Zhou Kang Xu Jin Doctoral Candidate; Dept. of Control Sci. & Eng., Huazhong Univ. of Sci. & Tech., Wuhan 430074, China.;A mathematic model of source management[J];Journal of Huazhong University of Science and Technology;2005-02
7 LIU Chang hong, CHEN Qiu (Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031);Analysis of Structural General Reliability of the Loading and Strength Based on Information Entropy[J];Mechanical Science and Technology;2003-03
8 LIU Changhong CHEN Qiu (Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031 China);RESPONSE SURFACE METHOD IN FUZZY PARAMETERS UNDER THE ENTROPY[J];Journal of Mechanical Strength;2003-02
9 Lu Zhenzhou Yue Zhufeng School of Aviation, Northwestern Ploytechnical University, Xi'an 710072, China School of Mechanics and Civil Construction, Northwestern Ploytechnical University, Xi'an 710072, China;UNIFIED RELIABILITY MODEL FOR FUZZINESS AND RANDOMNESS OF THE BASIC VARIABLES AND STATE VARIABLES IN STRUCTURE~1[J];Acta Mechanica Sinica;2004-05
10 Li Yancong1,Niu Wentie2,Zhang Weiyu1(1.Tianjin Agricultural College;2.Tianjin University);Experimental Study on Milling Force of Stainless Steel Round Head[J];Automobile Technology;2004-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved