Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Aeronautica Et Astronautica Sinica》 2015-07
Add to Favorite Get Latest Update

Manufacturing process and mechanical performance before and after aging treatment of embedded co-cured high-temperature-resistance damping composite

ZHANG Qian;LIANG Sen;LIANG Tianxi;School of Mechanical Engineering,Qingdao Technological University;China Academy of Engineering Physics;  
The high-temperature-resistance property of the embedded co-cured damping composite is very important to its application in special environment.A new high-temperature-resistance ingredient of viscoelastic damping material is found through orthogonal experimental method to be co-cured with high-temperature-resistance composite preperg(T700/QY260).Damping material is dissolved in tetrahydrofuran to form viscoelastic material solution and then it is used to produce damping membrane on the composite preperg by brush coating process.After the composite preperg with damping membrane is laid according to the design requirement,the autoclave is employed to make the embedded co-cured high-temperature-resistance damping composite specimens.The interlaminar bonding force between the damping layer and composite is tested before and after high-temperature aging to study the high-temperature resistant performance of this embedded co-cured damping composite.The results show that the composite material has good high-temperature-resistance performance and it would provide a possibility for the wide application of embedded co-cured high-temperature-resistance damping composite.
【Fund】: 国家自然科学基金(51375248);; 中国工程物理研究院“仪表板的设计与开发”项目~~
【CateGory Index】: TB33
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 LI Jian-li,ZHANG Yuan,ZHANG Xin-yuan(Shaanxi Textile Science Institute,Xi'an 710038,China);Development and Application of Carbon Fiber Composite Braking Block[J];Development and Application of Materials;2012-02
2 DU Shanyi(Harbin Institute of Technology,Harbin 150001,China);Advanced composite materials and aerospace engineering[J];Acta Materiae Compositae Sinica;2007-01
3 LUO Xi-min,LUO Yi-feng(National Specialty Synthetic Fiber Information Center,Beijing 100028 China);The Application of Several High Performance Fibers and Composite Materials in High Speed Train both in Abroad and Home[J];Hi-Tech Fiber & Application;2011-05
4 Fu Tiezhu,Cai Huaixun,Wang Xingping(Engineering Technology Research Center of National Fluoro-material,Quzhou,Zhejiang 324000);The Development of Fluoroelastomers and Vulcanization Systems[J];Chemical Production and Technology;2011-05
5 LI Xuan,LIANG Sen,WU Ning-jing1,CHANG Yuan-yuan(School of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,P.R.China;Key Laboratory of Rubber-Plastics of Ministry of Education,Qingdao University of Science and Technology,Qingdao 266042,P.R.China);Investigation on the Damping Characteristics of the Embedded Co-cured Composite Damping Structures[J];Science Technology and Engineering;2010-06
6 ZHANG Zhongsheng,LIANG Sen College of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,China;Manufacturing Process and Interlaminar Bonding Property of Embedded Medium-temperature Co-cured Composite Material Damping Structure[J];Acta Aeronautica et Astronautica Sinica;2013-08
7 ZHANG Chenwei;ZHANG Boming;School of Materials Science and Engineering,Beihang University;;Application and Key Technology of Composites Tank in Space Cryogenic Propulsion System[J];Acta Aeronautica et Astronautica Sinica;2014-10
8 Liang Sen 1 Liang Lei 2 Mi Peng 1(School of Mechanical Engineering,Qingdao Technological University,266033,Qingdao,China) 1(Department of Mechanical and Electronical Engineering,Baoji University of Arts and Sciences,721007,Baoji,China) 2;New development of the embedded and co-cured composite damping structres[J];Chinese Journal of Applied Mechanics;2010-04
9 MI Peng1,LIANG Sen1,Zhang Yi-xia2(1.School of Mechanical Engineering,Qingdao Technological University,Qingdao 266033,China; 2.School of Engineering and Information Technology,The University of New South Wales at ADFA,Canberra 2600,Australia);Numerical simulation on performance of embedded and co-cured composite damping structure under low velocity impact[J];Journal of Vibration and Shock;2012-14
10 LIANG Sen;WANG Hui;ZHANG Zhong-sheng;School of Mechanical Engineering,Qingdao Technological University;;Tests for dynamic performance of embedded high-temperature co-cured composite damping structures[J];Journal of Vibration and Shock;2013-20
Chinese Journal Full-text Database 10 Hits
1 Liu Hua Zhu Xiaoqin Yang Jialing(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Impulsive loading of simply supported lattice truss core sandwich beams with axial restraints[J];Journal of Beijing University of Aeronautics and Astronautics;2009-12
2 ZUO Long-yan,XIAO Jun,LI Yong,QU Tao (College of Material Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);3D MODEL AND SIMULATION OF TAPE LAYING ON CYLINDER WITH OPENING BASED ON MFC AND OPENGL[J];Fiber Reinforced Plastics/Composites;2008-03
3 QI Hui-min,WAGN Chun-lan,GAO Jin-miao(Key Laboratory for Special Functional Polymer Materials and Related Technologies of Ministry of Education,School of Materials Science and Engineering,East China University of Science and Technology,Shanghai 200237,China);CHEMORHEOLOGICAL BEHAVIOR AND CURE KINETICS OF SILICON-RYLACETYLENE-CONTAINING RESIN FOR RESIN TRANSFER MOLDING[J];Fiber Reinforced Plastics/Composites;2009-06
4 ZHANG A-ying1,2,ZHANG Dong-xing1,LI Di-hong1,YANG Rui1(1.Harbin Institute of Technology,Harbin 150001,China;2.Harbin University,Harbin 150086,China);ADVANCES OF STUDY ON FATIGUE PROPERTIES OF CARBON FIBER REINFORCED EPOXY LAMINATES[J];Fiber Reinforced Plastics/Composites;2010-06
5 ZHANG A-ying1,2,ZHANG Dong-xing1,ZHU Hong-yan1,LI Di-hong1(1.Harbin Institute of Technology,Harbin 150001,China;2.Harbin University,Harbin 150086,China);EXPERIMENTAL CHARACTERIZATION OF POROSITY AND MECHANICAL PROPERTIES OF CARBON/EPOXY COMPOSITE LAMINATES[J];Fiber Reinforced Plastics/Composites;2011-01
6 QI Jun-wei,LI An-ran,HUANG Zhi-jun,XIONG Wen-lei(College of Materials Science and Technology,Nanjing University ofAeronautics and Astronautics,Nanjing 210016,China);RESEARCH ON THE TAPE LAYING TECHNOLOGIC PARAMETERS[J];Fiber Reinforced Plastics/Composites;2011-04
7 ZHANG Yan-chang 1,2,WANG Zi-li 2,ZHANG Shi-lian1(1 School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiao Tong University,Shanghai 20030,China;2 School of Naval Architecture & Ocean Eng.,Jiangsu University of Science and Technology,Zhenjiang 212003,China);Simulation analysis of folded core structure under dynamic load[J];Journal of Ship Mechanics;2010-Z1
8 YU Qi-yong,MA Yu-pu,GUO Wan-tao,WU Yi-bo (Luoyang Ship Material Research Institute,Luoyang 471039,Henan,China);Structural Damping Composite and Its Research Progress[J];Journal of Materials Engineering;2007-S1
9 CHEN Guang-wei1,2,WANG Fu-you1,2,ZHANG Guo-li1,2,CHEN Li1,2(1 Composite Materials Research Institute of Tianjin Polytechnic University,Tianjin 300160,China;2 Key Laboratory for Advanced Textile Composites of Ministry of Education in Tianjin Polytechnic University,Tianjin 300160,China);Study on the Mechanical Performance of Laminated Composites with Ladder Splicing[J];Journal of Materials Engineering;2009-S2
10 ZHANG Jian-bao,XIAO Jun,WEN Li-wei,QI Jun-wei,DANG Xu-dan(College of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Research Progress of Automated Tape-laying Technology[J];Journal of Materials Engineering;2010-07
China Proceedings of conference Full-text Database 10 Hits
1 ZHANG Fuhua~1,WANG Rongguo~1,Liu Wenbo~2,HE Xiaodong~1 (1 Centre for Composite Materials & Structures,Harbin Institute of Technology Harbin 150001; 2 School of Materials Science and Engineering,Harbin Institute of Technology Harbin 150001);Preparation and Chracterization of MWCNTS/CF Multi-Scale Reinforcement[A];[C];2008
2 SONG Hongwei JI Kexing HUANG Chenguang LUO Shukun (Hypersonic Research Center CAS, No.15 Beisihuanxi Road, Beijing 100190, China) (Key Laboratory of Hydrodynamic and Ocean Engineering, Institute of Mechanics, CAS, No.15 Beisihuanxi Road, Beijing 100190, China);3D MODELING OF COUPLED THERMO-FLUID-SOLID OF ACTIVE COOLING CHANNELS AND STRESS ANALYSIS OF VARIOUS CONFIGURATIONS[A];[C];2010
3 CAI Tian-shu(School of Material Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);DEVELOPMENT OF 3D WOVEN COMPOSITE MATERIAL AND ITS RTM TECHNOLOGY[A];[C];2008
4 QI Huimin, WANG Chunlan, GAO Jinmiao, HUANG Farong, DU Lei (Key Laboratory for Special Functional Polymer Materials and Related Techniques of Ministry of Education, East China University of Science and Technology, Shanghai 200237, P. R. China);Chemorheological Behavior and Cure Kinetics of Silicon-Containing Arylacetylene Resin for Resin Transfer Molding[A];[C];2008
5 Wang Zili~1,Zhang Yanchang~(1,2),Gu Jinlan~3, (1.School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212003,China) (2.School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiaotong University,Shanghai 20030,China) (3.Shanghai Bestway Marine Engineering Design CO.LTD,Shanghai 20030,China);Dynamic response of laser-welded metallic sandwich panels subjected to underwater explosive loads[A];[C];2009
6 ;Application of Advanced Composite Materials in Aviation Field[A];[C];2012
7 QI Guocheng,ZHANG Boming,YE Jinrui,WANG Yang (Beihang University,Beijing,100191,China);Characteration of T800 Grade Carbon Fiber/Epoxy Prepreg Curing Progress[A];[C];2012
8 XU Longtao,WU Zhanjun,WANG Yishou,MA Shuyi (State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,No.2 Linggong Road,Ganjingzi District,Dalian,116024,Liaoning Province,China);Experimental Study of Impact Force Identification on a Composite Structure Using a System-identification Method[A];[C];2012
9 ;Tension Property Prediction and Experiment Study of T700 Warp Knitted Fabric Composite Unidirectional Iaminates[A];[C];2012
10 ;Application of Composites in Noise Reduction Nacelle[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Gao Shuli, Chai Mengxian, Zhang Mingxi (Research Institute for Special Structure of Aeronatical Composites 250023);RESEARCH DEVELOPMENT OF MICROWAVE COMPOSITES[J];Engineering Plastics Application;2000-05
2 Guo Yuming Yan Hongbin Ling Ying (Res Inst of Aerospace Material and Processing);STUDY OF MULTI-FUNCTION COMPOSITES WITH LOW DENSITY ABLATION HEAT PROTECTION AND WAVE TRANSMITION[J];Fiber Reinforced Plastics/composite;2001-05
3 Song Hua Zhang Huiping Yan Xiong (Donghua University);FIBER REINFORCED FRICTION COMPOSITES[J];Fiber Reinforced Plastics/composite;2003-01
4 XIE Jian-hong,ZHANG Wei-gong (Department of Instrument Science and Engineering, Southeast University, Nanjing 210096, China);Research and Development of Smart Material and Structure[J];Journal of Transcluction Technology;2004-01
5 Zeng Hanmin (Materials Science Institute, Zhongshan University, Guangzhou);The Developments in Polymeric Composites - The fiber-reinforced resin composites 1 .The Progress in Polymeric Composites and Their Structure-Property Relationships[J];Journal of Materials Engineering;1989-05
6 CHEN Shao-jie(Shenyang Aircraft Design and Research Institute, Shenyang 110035, China);Development Trends of Advanced Composite in Near Term[J];Journal of Materials Engineering;2004-09
7 Lijian Pan and Boming Zhang Centre for Composite Materials and Structure,Harbin Institute of Technology,Harbin 150080,China;Damping and Mechanical Properties of Cocured Composite Laminates with Embedded Perforate Viscoelastic Layer[J];材料科学技术(英文版);2009-04
8 LIANG Jun, DU Shanyi (Center for Composite Moteriols, Harbin Institute of Technology, Harbin 150001, China);INVESTIGATION OF THE THERMO-MECHANICAL PROPERTIES OF THERMAL PROTECTIVE COMPOSITES UNDER HIGH TEMPERATURE[J];Acta Materiae Compositae Sinica;2004-01
9 ZHANG Jifeng,ZHANG Boming~,DU Shanyi (Center for Composites & Structures,Harbin Institute of Technology,Harbin150001,China);Improvement and parameter design of advanced composite grid plate structures[J];Acta Materiae Compositae Sinica;2006-03
10 DU Shanyi(Harbin Institute of Technology,Harbin 150001,China);Advanced composite materials and aerospace engineering[J];Acta Materiae Compositae Sinica;2007-01
China Proceedings of conference Full-text Database 1 Hits
1 ZHANG Yang HE Lu-lin(Beijing Institute of Aeronautical Materials,Beijing 100095,China);RESEARCH ON TYPES OF PHENOLIC RESIN CURING BISPHENOL-A EPOXY RESIN[A];[C];2008
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved