Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Aeronautica Et Astronautica Sinica》 2015-07
Add to Favorite Get Latest Update

Analysis and compensation for absolute positioning error of robot in automatic drilling

DONG Huiyue;ZHOU Huafei;YIN Fucheng;College of Mechanical Engineering,Zhejiang University;Shaanxi Aircraft Industry (Group)Company Ltd.;  
Due to the relatively low absolute positioning accuracy of robot,the required accuracy of drilled holes could not be directly met without compensation during robot automatic drilling.In order to improve the accuracy,the absolute positioning error of robot is researched.Firstly,this article discusses the error sources and generating processes.And through theoretical analysis and relevant experiment,we found that the absolute positioning error would have different influences on translation component and rotation component of calibration result of robot base coordinate system.Secondly,in order to compensate for the coordinate converted error caused by calibration inaccuracy of base coordinate system,a new method based on constructing error Coons surface function is proposed from the standpoint of aircraft surface construction principle.And the validity of the new method is experimentally verified through robot automatic drilling.Results show that the average error of holes is 0.205 mm and the maximum error is less than 0.343 mm,which must be controlled under 0.5mm.The required accuracy of robot automatic drilling is realized.
【Fund】: 国家自然科学基金(51275463);; 中央高校基本科研业务费专项资金(2014FZA4003)~~
【CateGory Index】: V262.4;TP242
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 7 Hits
1 Ding Xilun Zhou Lelai Zhou Jun(School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100191,China);Pose error analysis of robot in three dimension[J];Journal of Beijing University of Aeronautics and Astronautics;2009-02
2 QU Weiwei,DONG Huiyue,KE Yinglin Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China;Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process[J];Acta Aeronautica et Astronautica Sinica;2011-10
3 LIV Miying HUANG Jiazian YIE Qigen (Dept of Mechanical Engng,Southeast University,Nanjing 210081);A GENERAL METHOD OF CALCULATING ACCURACY AND ITS APPLICATION TO MECHANICAL STRUCTURE AND SYSTEM[J];Robot;1992-04
4 YANG Guang-lin,KONG Ling-fu,WANG Jie(College of Information Science and Engineering,Yanshan University,Qinhuangdao066004,China);A New Calibration Approach to Hand-Eye Relation of Manipulator[J];Robot;2006-04
5 REN Yongjie ZHU Jigui YANG Xueyou YE Shenghua (State Key Laboratory of Precision Measuring Technology and Instruments,Tianjin University,Tianjin 300072);METHOD OF ROBOT CALIBRATION BASED ON LASER TRACKER[J];Chinese Journal of Mechanical Engineering;2007-09
6 Tian Wei *, Zhou Weixue, Zhou Wei, Liao Wenhe, Zeng Yuanfan College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;Auto-normalization algorithm for robotic precision drilling system in aircraft component assembly[J];中国航空学报(英文版);2013-02
7 QU Weiwei;HOU Penghui;YANG Genjun;HUANG Guanping;YIN Fucheng;SHI Xin;Department of Mechanical Engineering,Zhejiang University;AVIC Shaanxi Aircraft Industry(Group) Company Limited;AVIC Shaanxi Aircraft Industry(Group )Company Limited;;Research on the Stiffness Performance for Robot Machining Systems[J];Acta Aeronautica et Astronautica Sinica;2013-12
Chinese Journal Full-text Database 10 Hits
1 WU Ping(Dept. of Elec. Engn. & Info. Sci., Anhui University, Hefei 230039,China);Visual computation of bistatic cross section for complex targets with smooth surface[J];Journal of Anhui University of Technology and Science;2003-02
2 TAO Yu-qin1,CHEN Su-gen2 (1.Ma'anshan Teacher's school,Ma'anshan,243000;2.Department of Mathematics,Anqing Teachers College,Anqing 246133,China);Quadratic T-B Spline Interpolation Curve Based on Adjusted Curvature[J];Journal of Anqing Teachers College(Natural Science Edition);2008-04
3 CHEN Su-gen1,SU Ben-yue2,WANG Zhi-hua1(1.School of Mathematics & Computational Science,2.School of Computer & Information,Anqing Teachers College,Anqing 246133,China);Quasi-Hermite Curve/surface and Its Application[J];Journal of Anqing Teachers College(Natural Science Edition);2011-03
4 Hu XiaoDan Lu XiLinDepartment of Industrial Design and Information Engineering, Beijing Institute of Clothing Technology, Beijing 100029;The Integrated Application of VC and OpenGL[J];Journal of Beijing Institute of Clothing;2002-02
5 Guo Ruiliang Zhang HuiDepartment of Clothing, Beijing Institute of Clothing Technology, Beijing 100029;Discussion on Fitting of Pattern Curve in Computer Aided Apparel Design[J];Journal of Beijing Institute of Clothing;2002-02
6 JIANG Yan1,2,WANG Rui1(1.Department of Textiles,Tianjin Polytechnic University,Tianjin 300160,China;2.Computer Information Center,Beijing Institute of Fashion Technology,Beijing 100029,China);Design and Realization of the Virtual Sewing System[J];Journal of Beijing Institute of Clothing Technology(Natural Science Edition);2010-01
7 LI Ya-xu,WANG Zhao-hui(Fashion & Art Design Institute,Donghua University,Shanghai 200051,China);Construction of Average-sized Mannequins Based on 3D Point Cloud Data[J];Journal of Beijing Institute of Clothing Technology(Natural Science Edition);2011-03
8 PAN Yang-yu(1,3),LI Dong-bo1,YANG Hui2 (1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,Jiansu,China;2.Artillery Institute Nanjing Branch,Nanjing 211132,Jiangsu,China;3.Huaian Institute of Information and Technology,Huaian 223003,Jiangsu,China);Research on Curved Surface Reconstruction and Decomposition with Uniform B-spline Wavelet[J];Acta Armamentarii;2007-03
9 GUO Xiao-dong1,ZHAI Qing-fu1,ZHANG Wei-qing1,ZHANG Ming-de1,SUN Xiu-wen2(1.Key Laboratory of Manufacture and Test Techniques for Automobile Parts,Ministry of Education,Chongqing Institute of Technology,Chongqing 400050,China;2.Harbin Measuring & Cutting Tool Group Co.,Ltd,Harbin 150040,China);Research on Tooth Form Measuring of Unknown Parameters Bevel Gear[J];Journal of Beijing University of Technology;2010-06
10 TIAN Zhu-you~1,JIAN Bin~2 (1.Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China;2.School of Mechanical Engineering and Automation,Beijing University of Aeronautics and Astronautics,Beijing 100084,China);A new skinning method in reverse engineering[J];Journal of Beijing Institute of Machinery;2004-03
China Proceedings of conference Full-text Database 10 Hits
1 YUE Ying School of Mechanics Engineering,North China Electric Power University,Baoding 071003,P.R.China;Bi-arc Approximation Algorithm for NURBS Curve in the Numerical Control Machining[A];[C];2010
2 ;基于曲线的正切运动C轴的控制算法研究[A];[C];2008
3 ;基于VC++的移动曲面拟合等高线生成算法研究[A];[C];2006
4 JIANG Guo-xing, HAUNG Ming-ji, TENG Xiang-yang, JIA Zhi-xin (College of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083);Study on tool path generation for intersect-curve machining in the field of carving[A];[C];2004
5 PAN Rong-Jiang+, MENG Xiang-Xu, YANG Cheng-Lei, WANG Rui (School of Computer Science and Technology, Shandong University, Jinan 250100, China);Geometrical Features Extraction of Revolving Solids[A];[C];2005
6 ZHANG Li-da LIAN Ling-jun REN La-chun (School of Energy and Environment of Xihua University,Chengdu Sichuan610039;Extension of francis turbine blade[A];[C];2008
7 YU De-min, WANG Yong-qiang , XU Zeng-pu, HU Ying-jun (College of Mechanical Engineering , Tianjin University of Science and Technology, Tianjin 300222,China );MEASUREMENT AND RESTRUCTION FOR WORKING FACE OF LAPEL-SHAPER[A];[C];2005
8 Xu Wei Ji Hao Liu Xiaoping VCC Division,School of Computer & Information,Hefei University of Technology,Hefei,230009;Construction of G1 Continuity Surfaces Based on Nine Parameter Interpolation Using Adaptive C-T Splits[A];[C];2008
9 Tang Ke-lun, Zhang Xiang-wei, Xiong Han-wei, Cheng Si-yuan (ChongQing University ,ChongQing 400044;Sichuan University of Science & Enginneer, ZiGong, 643033; GuangDong University of Technology,GuangZhou 510090);Fusion of the Vision Information and CMM Measurement[A];[C];2005
10 LIU Aijun 1 , HUANG Songbo 1 , YAN Guangrong 2 (1. CAXA Technology Co., Ltd, Beijing 100190, China;2. Sc hool of Mechanic al Engineering and Automation, Beihang Univers ity, Beijing 100191, China );Research on Hybrid Modeling Technology for CAD Model[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
2 ZHANG Wen-zeng, CHEN Qiang, SUN Zhen-guo, TANG Xiao-hua(Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China).;Quick calibration method of part coordinates for arc welding robot[J];Transactions of The China Welding Institution;2005-07
3 Bi Shusheng Liang Jie Zhan Qiang et al;Applications of Robotics Technology in Aviation Industry[J];Aeronautical Manufacturing Technology;2009-04
4 ;Control Technology of Flexible Track Automatic Drilling Machine[J];Aeronautical Manufacturing Technology;2009-24
5 ;Robot Drilling System for Automatic Drilling of Aircraft Component[J];Aeronautical Manufacturing Technology;2010-02
6 ;Normal Measurement and Adjustment for Skin Drilling[J];Aeronautical Manufacturing Technology;2010-23
7 ;Measurement Method for Evaluating Normal Direction of Surface for Digital Drilling and Riveting[J];Aeronautical Manufacturing Technology;2011-22
8 Qin Xiansheng1, Wang Wendan1, Lou Ali2, Wei Teng2 (1. School of Mechatronics, Northwestern Polytechnical University, Xi’an 710072, China) (2. Xi’an Aircraft Industry (Group) Company Ltd., Xi’an 710089, China);Three-point Bracket Regulation Algorithm for Drilling and Riveting of Aerofoil[J];Acta Aeronautica Et Astronautica Sinica;2007-06
9 QU Weiwei,DONG Huiyue,KE Yinglin Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China;Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process[J];Acta Aeronautica et Astronautica Sinica;2011-10
10 YING Gaoming,WANG Zhongqi,KANG Yonggang,WU Zhipeng,HU Zhiming(Key Laboratory of Ministry of Education for Contemporary Design and Integrated Manufacturing Technology,Northwestern Polytechnical University,Xi'an Shaanxi 710072,China);Study on Normal Vector Measurement Method in Auto-drilling & Riveting of Aircraft Panel[J];Machine Tool & Hydraulics;2010-23
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved