Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Anhui University of Science and Technology(Natural Science)》 2010-03
Add to Favorite Get Latest Update

Analysis and Separation of Nano-CMM Error

YANG Hong-tao1,FEI Ye-tai2,CHEN Xiao-huai2,XIA Rui-xue2 (1.School of Mechanical Engineering,Anhui University of Science and Technology,Huainan Anhui 232001,China;2.School of Instrumentation Science and Opto-electronics Engineering,Hefei University of Technology,Hefei Anhui 230009,China)  
According to the Nano-CMM structure,the nanometer level error source was analyzed by applying the modern accuracy theory and the dynamics and statics mechanics.The representation form and influence of various errors were described in detail,which was the basis of subsequent error distribution and structure optimization.Due to the requirements of the accurate circumstance,structure,error distribution character and precision requirement of the Nano-CMM,the error separating tool was constituted with the micro three light beam planar reflector laser interferometer and the correlative adjustable table,which realize the synchronous separation of the standard indicating error,the yaw,pitch and roll error of the guide strip and avoid the heat and vibration influence of interferometer to separation error.At the same time,the additive error created by the nonreal-time measurement of the single function instruments is avoided too.The validity and reliability of the facility is verified by the actual error separation result.
【Fund】: 国家自然基金重大国际合作研究基金资助项目(50420120134)
【CateGory Index】: TH721
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 SHEN Xiao-yan,LIN Jie-jun,LI Jia-fu,YIN Jian-long,LI Dong-sheng (College of Metrology and Measurement Engineering,China Jiliang University,Hangzhou 310018,China);Evaluation and Error Analysis of Ultra-precision Two-dimensional Measuring and Positioning System[J];Instrument Technique and Sensor;2013-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Xue-ying,LIU Shu-gui,ZHANG Guo-xiong,WANG Bin(State Key Laboratory of Precision Measuring Technology and Instruments,Tianjin University,Tianjin 300072,China);Calibration technology of articulated arm flexible CMM[J];Journal of Harbin Institute of Technology;2008-09
2 MA Xiu-shui~(1,2),FEI Ye-tai~1,CHEN Xiao-huai~1,WANG Hong-tao~1,ZHAO Jing~1(1.School of Instrument, Hefei University of Technology, Hefei 230009, China; 2. Dept. of Measurement and Control Engineering, Anhui University, Hefei 230029, China);Discussion on several issues in ISO10360-2 Standard[J];Journal of Hefei University of Technology(Natural Science);2004-10
3 WANG Hong-tao~1,LIU Qiao-yun~1,MA Xiu-shui~2(1.School of Instrument, Hefei University of Technology, Hefei 230009,China; 2. Dept.of Automation,Anhui University,Hefei 230039, China);Maintenance of gas source for the three-dimensional coordinate measuring machine[J];Journal of Hefei University of Technology(Natural Science);2004-10
4 ZHOU Yao-xin~1,WANG Hong-tao~1,WANG Jian-mei~2(1.School of Instrument, Hefei University of Technology, Hefei 230009, China; 2.Department of Equipment and Lab Facilities, Hefei University of Technology, Hefei 230009, China);Probe selection of the coordinate measuring machine(CMM)[J];Journal of Hefei University of Technology(Natural Science);2004-10
5 ZHANG Yong(School of Instrument,Hefei University of Technology,Hefei 230009,China);Design of the mechanic system of the multi-dimensional coordinate measurement machine for measuring the size of the crystallizer[J];Journal of Hefei University of Technology(Natural Science);2005-12
6 XI Lin,YU Xiao-fen,FAN Wei (School of Instrument Science and Optoelectronic Engineering,Hefei University of Technology,Hefei 230009,China);Research on the two-coordinate platform of novel Nano-CMM[J];Journal of Hefei University of Technology(Natural Science);2006-12
7 SHANG Ping,FEI Ye-tai (School of Instrument Science and Opto-electronic Engineering,Hefei University of Technology,Hefei 230009,China);On the structure design of the articulated arm flexible CMM[J];Journal of Hefei University of Technology(Natural Science);2008-06
8 DING Bang-zhou1,FEI Ye-tai1,NI Xiang-hong2,LIU Fang-fang1(1.School of Instrument Science and Opto-electronic Engineering,Hefei University of Technology,Hefei 230009,China;2.Electric Power Research Institute of Anhui Province,Hefei 230601,China);Application of optical fiber gratings in a 3D probe[J];Journal of Hefei University of Technology(Natural Science);2011-08
9 GUO Hui(Material Engineering Department, North China Institute of Astronautic Engineering, Langfang 065000, China);Measurement of Slating Hole with Coordinate Measuring Machine and Its Error Analyzing[J];Journal of North China Institute of Astronautic Engineer;2004-03
10 LIU Xin - yu ZHAO Xian - zhong (Mechanical Engineering Department, North China Institute of Astronautic Engineering, Langfang 065000, China);Reverse Engineering Design of Wave Wheel Parts[J];Journal of North China Institute of Astronautic Engineer;2004-04
China Proceedings of conference Full-text Database 2 Hits
1 ;Short arc measurement error analysis and alternative solutions[A];[C];2009
2 LIU Peng-cheng (Measurement Department,AVIC Xi'an Aero-Engine(Group) Ltd,Xi'an 710021,China);Improvement Inspection Method of Turbine Disk Dovetail Slot's Deviation[A];[C];2010
【Co-references】
Chinese Journal Full-text Database 2 Hits
1 ;Research Tendency of Ultra Precision Measurement Key Technology[J];New Technology & New Process;2006-05
2 MAN Nan1,ZHANG Xin-na2,LI Dong-sheng1(1.College of Metrology and Measurement Engineering,China Jiliang University,Hangzhou 310018,China;2.College of Electrical & Mechanical Engineering,Hangzhou 310018,China);Experimental Study and Performance Analysis of Air Spring Vibration Isolation System[J];Noise and Vibration Control;2010-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Ye Dong; Che Rensheng (Dept. of Instrumentation,Measurement & Control engineering, HIT);Modeling and Error Analysis for Human-simulation Multi-joint Coordinate Measuring Machine[J];Journal of Harbin Institute of Technology;1999-02
2 MA Xiu-shui~(1,2),FEI Ye-tai~1,CHEN Xiao-huai~1,WANG Hong-tao~1,ZHAO Jing~1(1.School of Instrument, Hefei University of Technology, Hefei 230009, China; 2. Dept. of Measurement and Control Engineering, Anhui University, Hefei 230029, China);Discussion on several issues in ISO10360-2 Standard[J];Journal of Hefei University of Technology(Natural Science);2004-10
3 Air-bearing Work-stage under the Drive of One-side Mode HU Jian-bing,ZHOU Yun-fei,ZHU Hong-guang,HU Ke-feng,WU Hao,LIU Ke- zhao (Huazhong University of Science and Technology,Wuhan 430073,China);A Study about Analysis and Suppression Strategies of Vibration for the High Precision[J];Machine Tool & Hydraulics;2004-06
4 WANG Xue feng WANG Xiang zhao QIAN Feng LU Hong bin SONG Song BU Yang (Shanghai Institute of Optics and Fine Mechanics, The Chinese Academy of Sciences, Shanghai 201800);Laser Diode Interferometer Used to Measure Displacements in Large Range with a Nanometer Accuracy[J];Chinese Journal of Lasers;2001-05
5 Yang Qing dong 1,Christophe Van Den Bergh 2, Paul Vanherck 2, Jean Pierre Kruth 2 (1.Beijing Institute of Machinery Industry, Beijing 100085; 2.Katholieke University Leuven, Belgium);The Thermal Deformations and Error Compensation Based on Neural Network on a CMM[J];Acta Metrologica Sinica;2000-02
6 XIE Wenlong (School of Science, Southern Yangtze University, Wuxi 214064, China);The Error Analysis of Double Cubic Spline Function for Rectangular Ranges[J];Journal of Southern Yangtze University;2003-02
7 SU Shi -ping 1,2 ,LI Sheng -yi 2 ( 1 Changsha University of Electric Pow er,Changsha 410077,China)( 2 National University of defense Tech nology,Changsha 410073,China);Error automation moodeling of coordinate measuring machine based on multi-body system kinematics theory[J];Machinery Design & Manufacture;2002-04
8 Yin Ziqiang,Li Shengyi,Wang Zhuo (National University of Defense Technology,Changsha 410073,China);High Precision Measurement of Straightness[J];Computer Automated Measurement & Control;2004-02
9 ZHANG Xuegong (Dept.of Automation,Tsinghua University,Beijing 100084) (State Key Laboratory of Intelligent Technology and Systems of China);INTRODUCTION TO STATISTICAL LEARNING THEORY AND SUPPORT VECTOR MACHINES[J];;2000-01
10 Xu Zhenying Fei Yetai (Hefei University of Technology);Research on the Tracing of Dynamic Measuring Error Based on Wavelet-neural Network[J];Transactions of The Chinese Society of Agricultural Machinery;2003-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved