Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《JOURNAL OF HARBIN UNIVERSITY OF SCIENCE AND TECHNOLOGY》 1999-02
Add to Favorite Get Latest Update

Cause of Brittle Tool Exit Failure in Intermittent Cutting

TAO Fu-chun, YUN Zhi-xin, LIANG Ting-zhu, GUO Jun-shan, LI Bin-fang(1.Industrial Technical College of Harbin Univ. Sci. Tech., Harbin 150076 China;2. Harbin Shoe Manufacturer, Harbin 150026 China; 3.Technical Department ofQiqihar Forestry Machinery Factor  
Forming mechanism of negative shear is analyzed, and an expression of cuttingforce during negative shear is given. According to stress analysis of tool wedge zone, the followingconclusion is drawn: the negative shear makes the direction of cutting force deflect so that stressfield of tool get worse which results in tool failure. The causes of thermal cracks and crack exten-sion are analyzed by means of elastic-plastic mechanics, and effective measures preventing thetool from exit failure are presented.
【CateGory Index】: TG711
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 Cheng Yaonan(Doctoral Student,Mechanical & Power Engineering College,Harbin University of Science and Technology,Harbin,150080,China)Li Zhenjia Ao Xiaochun et al;Study on Stress State of 3D Complex Groove Milling Insert in Cut-in Course[J];Tool Engineering;2009-02
2 Cheng Yaonan,Gao Jun,Ao Xiaochun,Li Zhenjia Doctor,Associate Professor,Mechanical & Power Engineering College,Harbin University of Science and Technology,Harbin 150080,China;Study on Object Function of Milling Insert Impact Disrepair Based on Stress Field Analysis[J];Tool Engineering;2010-06
3 Zhang Guofu,Wang Yang Harbin No.1 Tool Manufacturing Corporation Ltd.,Harbin 150020,China;Finite Element Analysis of Disc Indexable Big Modulus Gear Milling Cutter[J];Tool Engineering;2012-09
4 WU Ming-yang,LIU Xian-li(Mechanical & Power Engineering College,Harbin University of Science and Technology,Harbin 150080,China);Distribution principle of face force density and stress state for the waved-edge milling insert[J];Journal of Harbin Institute of Technology;2009-09
5 CHENG Yao-nan,LIU Li,QIAN Jun,GONG Ya-nan,SHI Hui-nan(School of Mechanical Power Engineering,Harbin University of Science and Technology,Harbin 150080,China);High-efficient Cutting Technology of Large Forgings[J];Journal of Harbin University of Science and Technology;2013-01
6 Feng Ming Chen Yongjie Ni Lan (Huazhong University of Science & Technology,Wuhan Hubei 430074 );Research Status and Development Tendency of the Mechanism of Tool Fracture[J];Cemented Carbide;2007-01
7 CHENG Yaonan①, LIU Yinfeng②, TAO Fuchun①, LI Zhenjia①, WANG Yubin①(①Mechanical & Power Engineering College, Harbin University of Science and Technology, Harbin 150080, CHN;②Qiqihar Heavy CNC Equipment Corp. Ltd., Qiqihar 161005, CHN);Study on Cutter Adhering Disrepair Mathematic Model for Machining the Refractory Steel[J];Manufacturing Technology & Machine Tool;2009-06
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 CHENG Jin 1,JIANG Jian-jing 1,XIAO Ru-cheng 2,XIANG Hai-fan 2(1.Department of Civil Engineering,Tsinghua University,Beijing 100084,China; 2.Department of Bridge Engineering,Tongji University,Shanghai 200092,China);User interface design and its application based on ANSYS program[J];Building Science Research of Sichuan;2002-02
2 ZHANG Lei, LI Ying (College of Manufacture Engineering, Nanjing University of Science & Technology, Nanjing 210094, China);Nonlinear Modeling for High Speed Milling[J];Ordnace Industry Automation;2002-06
3 Liu Yuntong; Hu Jiangbi (College of Architecture and Civil Engineering, Beijing Polytechnic University, Beijing 100022 );A Methematical Model and 'Its Parameters Estimation for Fuzzy Evaluation[J];Journal of Beijing Polytechnic University;2001-01
4 CHEN Ai di, WANG Xin yi, WANG Zhong min, YANG Da yong, JIA Yu ping (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081);A Method of On-Line Monitoring Tool Wear Based on Fuzzy Classification[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;2000-03
5 Yang Guangyong(School of Mechanical Engineering, Beijing Institute of Technology,Beijing 100081);T-v Relahonship and Cutting Force in High Speed Cutting Processes[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;1996-03
6 Tan Yunchen; Yang Jiandong ;Xia Renfeng(Changchun institute of Optics and Fine Mechanics);Theoretical Cutting Forces When Tool Wear is Considered[J];Journal of Changchun Institute of Optics and Fine Mechanics;1995-02
7 CHEN En-ping 1.College of Mechanical Engineering, Yanshan University, Qinhuangdao, Hebei 066004, China;Studies on empirical formula of cutting force[J];Journal of Yanshan University;2004-04
8 Cong Bin; Liu Heng; Yan Shuren (Harbin Electric Machinery Company Limited);Analysis of Deformation Trend for High Speed Milling[J];LARGE ELECTRIC MACHINE AND HYDRAULIC TURBINE;1999-04
9 LI Guang-de 1, FU Gang 2, HE Wen xiu 1 (1.Harbin Electric Machinery Company Limited,Harbin 150040,China; 2.Harbin Power Equipment Company Limited,Harbin 150040,China);The Calculation of Three-dimension Temperature Field on Large Hydrogenerators Stator[J];LARGE ELECTRIC MACHINE AND HYDRAULIC TURBINE;2000-02
10 Zheng Minli;Li Zhenjia; Li Zhiren; Yan Fugang(Harbin University of Science Technology);The Test Study of the Reasonable Geometrical Parameters for Mold Block Face Milling Cutter[J];;1996-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Wang Yubin Li Zhenjia Tan Guangyu et al;Study on Boundary Condition of Temperature Field for Waved-edge Milling Insert[J];Tool Engineering;2004-11
2 Wang Zhigang Li Zhenjia Wang Yubin;Study and Experiment for Temperature Field of Waved-edge Milling Insert[J];Tool Engineering;2006-03
3 Sun Baojun Tan Guangyu;Numerical Simulation on Coupling Field of Milling Insert with Three-dimension Complex Groove[J];Tool Engineering;2006-05
4 Ge Jing,Postgraduate,School of Mechanical and Automotive Engineering,Hefei University of Technology,Hefei 230009,China Han Jiang;Analysis of Insert Cut-in Styles in Interrupted Turning[J];Tool Engineering;2010-09
5 Zhang Wenhui,Wang Haili Postgraduate,School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China;Finite Element Analysis of Stress Field of End-milling Cutter's Cut-in Process[J];Tool Engineering;2011-03
6 SUN Yu-jing,TAN Guang-yu,SUN Bao-jun,LIU Qiang(Mechanical & Power Engineering College,Harbin Univ.Sci.Tech.,Harbin 150080,China);Research on Sticking Failure Mechanism in Milling Process[J];Journal of Harbin University of Science and Technology;2005-06
7 LV Kai(School of Computer Science &Technology,Jilin Normal University,Siping 136001,China);Study on arithmetic of milling cutter temperature field building based on 2D cellular automata[J];Journal of Harbin University of Commerce(Natural Sciences Edition);2012-02
8 CHENG Yao-nan,LI Zhen-jia,GAO Jun,WANG Yu-bin(Mechanical & Power Engineering College,Harbin University of Science and Technology,Harbin 150080,China);Study on adhering disrepair experiments and grooves optimization of complex three-dimension groove milling inserts[J];Machinery Design & Manufacture;2011-01
9 SUN Shun-long1, TAN Guang-yu2, LI Guang-hui2, GUO Wei-hua1(1.Mechanical & Power Engineering College, Harbin University of Science and Technology, Harbin 150080, China; 2.College of Mechanical, Guangdong Dcean University, Zhangjiang 524088, China);Study on Arithmetic of Milling Cutter Temperature Field Building Based on 2D Cellular Automata[J];Mechanical Engineer;2007-04
10 ZHANG Can-guo,LI Chang-sheng,WANG Xin-ming,REN Yu-can(Hebei Institute of Agriculture Civil Engineering,Zhangjiakou 075024,China);Study on Parametric Effect on Milling Force in High Speed Machining Hardened Steel[J];Coal Mine Machinery;2011-07
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved