Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Huazhong University of Science and Technology(Nature Science Edition)》 2008-08
Add to Favorite Get Latest Update

Dynamic modeling of the movable joint on rolling linear guide

Mao Kuanming Li Bin Xie Bo Wei Yaoqiang(College of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China)  
The wide use of rolling linear guides in modern NC(numerical control) machine tools and automatic equipments has the weak point in its influences on the dynamic characteristics of these machines.This paper analyzed systematically both the domestic and oversea researches on the dynamic characteristics of linear rolling guide.Based on the weak and strong points of these researches,it provided a new dynamic model of the movable joint on linear rolling guide,and also testified this model by experiments.The following results were obtained: a.the dynamic model of the movable joint on linear rolling guide was generally useful and could be used in the dynamic model of any NC machine with liner rolling guide.b.The computer simulation computation results were basically the same as the experimental results,and in rolling and Yawing modal,the natural frequency simulation computation result was the same as the experimental result with an error less than 3 %,which proved the effectiveness of the model.c.The model could be easily combined with the mature finite software,which was very convenient in usage.
【Fund】: 国家重点基础研究发展计划资助项目(2005CB7244101);; 国家高技术研究发展计划资助项目(2006AA04Z407)
【CateGory Index】: TG659
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 YE Jian,HE Boxia,BU Xiongzhu,ZHOU Yan,ZHU Yunpu(Dept.of Instrument Science and Technology,School of Mechanical Engineering,Nanjing University of Science,Nanjing 210094,China);Test Method of Dynamic Characteristic Parameters of Feeding Mechanism[J];Journal of Test and Measurement Technology;2011-03
2 SUN Wei,WANG Bo,WEN Bang-chun(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China.);Dynamics Characteristics Testing and Parameter Identification for Joints of Linear Rolling Guideway[J];Journal of Northeastern University(Natural Science);2011-05
3 SUN Wei,KONG Xiangxi,WANG Bo,WEN Bangchun(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China);A precise finite element modeling approach for analyzing linear rolling guideway dynamics[J];Journal of Chongqing University;2013-03
4 Wang Shuting Li Jie Liu Tao Mao Kuanmin(School of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China);Interfacial stiffness characteristic modeling of mechanical fixed joints[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2011-08
5 ZHOU Junyong1,JIN Tao2,ZHAO Wanhua2,WANG Guanqun3(1.Suzhou Research Institute,Xi'an Jiaotong University,Suzhou Jiangsu 215021,China; 2.State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University,Xi'an Shaanxi 710049,China; 3.Dalian Machine Tool(CNC)Co.,Ltd,Dalian Liaoning 116620,China);Dynamic Characteristic Analysis and Optimization for the High Speed CNC Turning Center[J];Machine Tool & Hydraulics;2012-03
6 SUN Wei1,WANG Bo1,LU Ming2,WEN Bang-chun1(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China;2.Shenyang Machine Tool(Group) Co.,Ltd.,Shenyang 110142,China);Analytical modeling of linear rolling guide system based on Lagrange equation[J];Computer Integrated Manufacturing Systems;2012-04
7 YUE Yang,SHI Yao-yao,HE Xiao-dong;Optimization design on a new type pressure application guiding mechanism for composite material tape winding[J];Manufacturing Automation;2012-13
8 JIANG Shuyun ZHU Shulong (School of Mechanical Engineering,Southeast University,Nanjing 211189);Dynamic Characteristic Parameters of Linear Guideway Joint with Ball Screw[J];Journal of Mechanical Engineering;2010-01
9 Yang Yong1 Zhang Weimin1,2 Yang Tao1(1.School of Mechanical Engineering,Tongji University,Shanghai 201804,China 2.Chinese-German School for Postgraduate Studies,Tongji University,Shanghai 200092,China);Dynamic Characteristic Optimization of Feed System Based on Kriging Metamodel[J];Transactions of the Chinese Society for Agricultural Machinery;2013-05
10 LI Wei-yu1,JIANG Wan-sheng1,ZHAO Wan-hua2(1.Northwestern Polytechnical University School of Mechanical Engineering,Shannxi Xi'an 710072,China; 2.State Key Laboratory for Manufacturing Systems Engineering,Xi'an Jiaotong University,Shannxi Xi'an 710049,China);Dynamic Modeling Simulation and Experimental Research on Guideway Joint[J];Machinery Design & Manufacture;2013-05
【Citations】
Chinese Journal Full-text Database 6 Hits
1 Mao Kuanmin~a,b Li Bin~a (a College of Mechanical Science and Engineering;b The State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Response signals-based structural modal parameter identification[J];Journal of Huazhong University of Science and Technology(Nature Science Edition);2008-07
2 WANG Lie- long1,2, ZHU Zhuang- rui2, SUN Qing- hong2 ( 1.Dep. of Mechanical and Electrical Engineering, Chizhou Teachers College, Chizhou 247000, China; 2.Dep. of Mechanical Engineering, Southeast University, Nanjing 210096, China);Research on Identification of the Structural Interface Parameter of Machine Tool Orbit with Slip Mass[J];Mechanical Engineer;2006-09
3 Zhang Yu Liao Baiyu(Department of Mechanical Engineering,Kunming University of Science and Technology,Kunming 650093);The Efficient Identification Method of Joint Parameters of Machine Tools[J];JOURNAL OF KUNMING UNIVERSITY OF SCIENCE AND TECHNOLOGY;1998-02
4 Zhang Xueliang 1 Wen Shuhua 1 Xu Gening 1 Ni Runtang 2 (Taiyuan Heavy Machinery Institute, Taiyuan 030024) 1 (Datong, Xin'g aoshan Coal-Transportation Company, Datong 037001) 2;Fractal Model of the Tangential Contact Stiffness of Machined Surfaces in Contact[J];Chinese Journal of Applied Mechanics;2003-01
5 Tong Zhongfang Zhang Jie (Zhejiang University);RESEARCH ON THE DYNAMIC CHARACTERISTIC AND ITS IDENTIFICATION OF THE JOINT BETWEEN COLUMN AND BED OF A MACHINING CENTER[J];Journal of Vibration and Shock;1992-03
6 Qin Baorong (35);Research on Dynamics or Machine Tool Joints[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1996-08
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 Liu Fulin Yan Weiming He Haoxiang(Beijing Laboratory of Earthquake Engineering and Structural Retrofit,Beijing University of Technology,Beijing 100124,China);MODE SHAPE IDENTIFICATION AND DISPOSAL IN THE STRUCTURE OF OVERLAP FREQUENCIES[J];Industrial Construction;2011-S1
3 CHENG Qiang,LIU Xin-yu,ZHAO Yong-sheng,AN Guo-ping(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100124,China);Identification of Dynamical Contact Parameters for Spindle-Tool Holder Interface Based on Frequency Response Functions[J];Journal of Beijing University of Technology;2013-08
4 Mao Kuanmina,b Huang Xiaoleia,b Tian Hongliangb Li Binb(a School of Mechanical Science and Engineering;b State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan 430074,China);Identifying dynamic parameters of fixed joints in machine tools and its fitting method[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2011-03
5 Wang Shuting Li Jie Liu Tao Mao Kuanmin(School of Mechanical Science and Engineering,Huazhong Universityof Science and Technology,Wuhan 430074,China);Interfacial stiffness characteristic modeling of mechanical fixed joints[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2011-08
6 WANG Lie-long1,2,ZHU Zhuang-rui1(1.College of Mechanical Engineering,Southeast University,Nanjing 210096,China;2.Department of Mechanical and Electrical Engineering,Chizhou Institute,Chizhou 247000,China);Optimal dynamic topology design of mechanical tool column with relative density[J];Mechanical & Electrical Engineering Magazine;2008-04
7 WU Liang-sheng,WANG Ze-lin,QU Chong-nian,MA Jian-feng(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Design of Dynamic Characteristic Testing System for Sliding Joint[J];Machinery Design & Manufacture;2012-07
8 WANG Lie- long1,2, ZHU Zhuang- rui2, SUN Qing- hong2 ( 1.Dep. of Mechanical and Electrical Engineering, Chizhou Teachers College, Chizhou 247000, China; 2.Dep. of Mechanical Engineering, Southeast University, Nanjing 210096, China);Research on Identification of the Structural Interface Parameter of Machine Tool Orbit with Slip Mass[J];Mechanical Engineer;2006-09
9 MAO Jian,XIN Zhou(School of Mechanical and Electronical Engineering,Lanzhou University of Technology,Lanzhou 730050,China);Static and Dynamic Finite Element Analysis of the 2MK2250+150 High-grade Numerical Control Honing Machine Column[J];Machinery & Electronics;2011-11
10 Xie Jianhua1,Cui Xinwei2※,Ma Weibin1,Yue Yong1(1.College of Mechanical and Traffic,Xinjiang Agricultural University,Urumqi 830052,China;2.College of Mechanical science and Engineering,Huazhong University of Science and Technology,Wuhan 430074,China);Contact analysis and experimental study of the joint interfaces bolted connection[J];Transactions of the Chinese Society of Agricultural Engineering;2011-05
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Peng Shuwen (Research Institute of Jilin Chemical Industry Co., Jilin city 132021);STUDY ON PA66 REINFORCED WITH CARBON FIBRE[J];Engineering Plastics Application;1998-09
2 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
3 Wu Liangsheng ;Chen Weifu (School of Mechanical Engineering and Applied Electronic Technology, Beijing Polytechnic University, Beijing, 100022 );Calculation of Natural Freguencies and Vibration Models of Geared System Coupling Flexural and Torsional Vibrations[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
4 Yang Jiahua, Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083);Research on Identification of Interface Parameter of Two Joint's Planes[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-03
5 WU Liang-sheng~1 LIU Qing-long~1 ZHOU Da-shuai~(1,2) LUO Ji-cheng~1 1.College of Mechanical Engineering and Applied Electronics Technology,Beijing Univeristy of Technology,Beijing 100022,China; 2.Mechanical Engineering College,Jiamusi University,Jiamusi 154007,Heilongjiang,China;Structure Modified and Force Optimized Under the Dynamic Analysis of Tablet-machine[J];Journal of Beijing University of Technology;2008-03
6 WU Liang-sheng,CHEN Chang-hao,HOU Tao,ZHANG Zhen(College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology, Beijing 100124,China);Experimental Measurement of Structural Inherent Characteristics Based on Virtual Instrument Technology[J];Journal of Beijing University of Technology;2012-01
7 LI Ming,YANG Qing-dong(Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);High-speed dynamic analysis of the five-axis CNC milling machine SKY12160[J];Journal of Beijing Institute of Machinery;2007-04
8 ZhaoJie Chang Junying Chen Jiaqing (Department of Mechanical Engineering, Beijing Institute of Petro-chemical Technology, Beijing 102617);Application of ANSYS Software in Solution of Contact Problem with Friction[J];Journal of Beijing Institufe of Petrochemical Technology;2003-04
9 LI Jin-quan~1 FU Tie~2 LUAN Zhen-xing~1 (1.School of Automation,Beijing University of Posts and Telecommunications,Beijing 100876,China; 2.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);The Dynamic Analysis on BKX-ⅠPKM[J];Journal of Beijing University of Posts and Telecommunications;2008-05
10 WANG Ying-shu,Ding Ning(Mechanical Engineering Collage,Changchun University,Changchun*"130022,China);The grinding force model of cylindrical traverse grinding[J];Journal of Changchun University;2005-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 YE Jian,HE Boxia,BU Xiongzhu,ZHOU Yan,ZHU Yunpu(Dept.of Instrument Science and Technology,School of Mechanical Engineering,Nanjing University of Science,Nanjing 210094,China);Test Method of Dynamic Characteristic Parameters of Feeding Mechanism[J];Journal of Test and Measurement Technology;2011-03
2 HUANG Ye(Zhejiang Industry Polytechnic College,Shaoxing Zhejiang 312000,China);Research on Finite Element Analysis of Dynamics and Statics of Comb Box of Gill Machine[J];Equipment Manufacturing Technology;2011-03
3 SUN Wei,KONG Xiangxi,WANG Bo,WEN Bangchun(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China);A precise finite element modeling approach for analyzing linear rolling guideway dynamics[J];Journal of Chongqing University;2013-03
4 LI Ling1,CAI Li-gang2,GUO Tie-neng2,ZHAO Yong-sheng2,LIU Zhi-feng2(1.School of Mechanical and Electrical Engineering,Xi'an University of Arohitecture and Technology,Xi'an 710055,China; 2.College of Mechanical Engineering and Applied Electonics Technology,Beijing University of Technology,Beijing 100124,China);Normal Equivalent Properties of the Bolted Joints in Different Preload[J];Journal of Beijing University of Technology;2013-05
5 SUN Wei,KONG Xiang-xi,WANG Bo,WEN Bang-chun(School of Mechanical Engineering & Automation,Northeastern University,Shenyang,Liaoning 110819,China);CONTACT MODELING AND ANALYTICAL SOLUTION OF CONTACT STIFFNESS BY HERTZ THEORY FOR THE LINEAR ROLLING GUIDE SYSTEM[J];Engineering Mechanics;2013-07
6 Ma Yujian Tang Xiaoqi Mao Kuanmin Zhu Ming(National Engineering Research Center for Numerical Control System,Huazhong University of Science and Technology,Wuhan 430074,China);Dynamics model for the conical joint of spindle and tool holder on NC machine tools[J];Journal of Huazhong University of Science and Technology(Natural Science Edition);2011-01
7 GUO Cheng-long,YUAN Jun-tang,ZHANG Hua,WANG Zhen-hua(Nanjing University of Science and Technology,Nanjing 210094,China);Experimental research on the dynamic stiffness of rolling guide's joint[J];Machinery Design & Manufacture;2011-12
8 YUE Yang,SHI Yao-yao,HE Xiao-dong;Optimization design on a new type pressure application guiding mechanism for composite material tape winding[J];Manufacturing Automation;2012-13
9 YU Hao,LI Peng-zhong,SU Wang(Tongji University,Shanghai,200092,China);The Choice of Small Workpiece Composite Processing Spindle Layout[J];Manufacture Information Engineering of China;2012-09
10 Tian HongliangZhu DalinQin HonglingLin Weigong(College of Mechanical and Material Engineering,China Three Gorges University,Yichang 443002,China);Modification of Normal Load's Analytic Solutions for Joint Interface and Quantitative Experimental Verification[J];Transactions of the Chinese Society for Agricultural Machinery;2011-09
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 Zhang Xueliang Huang Yumei Fu Weiping Zhang Guangpeng (Taiyuan Zhongji Xueyuan 030024) (Xian University of Technology 710048);Fractal Model of Normal Contact Stiffness between Rough Surfaces[J];CHINESE JOURNAL OF APPLIED MECHANICS;2000-02
3 Tong Zhongfang Zhang Jie (Zhejiang University);RESEARCH ON THE DYNAMIC CHARACTERISTIC AND ITS IDENTIFICATION OF THE JOINT BETWEEN COLUMN AND BED OF A MACHINING CENTER[J];Journal of Vibration and Shock;1992-03
4 Hong Zhongyu;Zhou Qian(Shanghai Institute of Mechanical Engineering)(China Ship Scientific Research Center);IDENTIFICATION TECHNIQUE OF THE CONNECTING STIFFNESS FOR COMPLEX STRUCTURE USING OPTIMIZATION[J];JOURNAL OF VIBRATION AND SHOCK;1994-01
5 Yu Dejie(Hunan University);MODIFYING DYNAMICAL MODEL OF DAMPED STRUCTURES BY USING OF OPTIMIZATION TECHNIQUE[J];JOURNAL OF VIBRATION AND SHOCK;1994-02
6 ;Method of processing joining condition in predicting the result of machine tool structural design[J];;1990-06
7 Zhang Xueliang, et al (8);Modelling Static-basic Characteristic Parameter of Machine Tool Joint Surfaces and its Application[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1997-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved