Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY》 1996-11
Add to Favorite Get Latest Update

A Study on the Adaptive Fuzzy Controller Based on On Line Self Adjustment of Parameters

Cheng Tao School of Mech. Sci & Eng., HUST, Wuhan 430074, China. Zuo Li Liu Yanming Yang Shuzi  
The effects of quantitative factors and proportionality factor on the performance of a system with fuzzy controller are discussed. A adaptive fuzzy controlled based on on line adjustment of the factors to cope with the variation of the controlled system has been developed. Computer simulation results show that the controller is better than the conventional one as far as the control performance is concerned.
【Fund】: 国家自然科学基金 国家教委资助优秀年轻教师基金 国家教委留学回国人员基金
【CateGory Index】: TP273.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 Tu Yu Liang Huibing (Guangdong University of Technology);An Adaptive Fuzzy Controller Based on On-Line Self-Adjustment of Quantitative Factors and Proportionality Factor[J];广东自动化与信息工程;1999-02
2 Cheng Tao(Huazhong University of Science & Technology,Wuhan,China) Zuo Li Liu Yanming Yang Shuzi p 26 31;Study on Intelligent Adaptive Control in CNC Cutting Processes[J];中国机械工程;1999-01
3 Wang Yong Doctoral Candidate; College of Mech. Sci. & Eng., HUST, Wuhan 430074, China Huang Shuhuai Li Congxin;An Improvement of the Fuzzy Control Strategy in a High Speed Forging Press[J];华中理工大学学报;1997-09
【Citations】
Chinese Journal Full-text Database 2 Hits
1 HUANG Shisheng and HE Jianfeng(The 2nd Department of Mechanical Egineering,South China University of Technology.Guangzhou,510641,PRC);The Parameter Self-Tuning Fuzzy and Integral Control on TIG Weld Width[J];控制理论与应用;1995-04
2 Wang Jinzhang Yang Hui(Northeast University of Technology) (Jianxi Rare-earth Institute);Parameters On-line Self-turning Fuzzy Controller System[J];控制与决策;1989-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YANG Qi\|hua (Department of Machinery and Electronic Engineering China Institute of meterology, Hangzhou 310034, China);A design method of self-organizing fuzzy logic controller[J];中国计量学院学报;1999-02
2 Zhang Jianming(Zhejiang University,Hangzhou,China) Wang Ning Wang Shuqing;A Fuzzy Controller with Neuron Auto-tuning Scaling Factors for Independent Joint of the Robot Manipulators with Direct Driving[J];中国机械工程;1999-04
3 Wang Yong Xiong Xiaohong Huang Shuhuai (Huazhong University of Science & Technology) Li Congxin (Shanghai Jiaotong University);STUDY ON FUZZY CONTROL IN HIGH SPEED FORGING PRESS[J];机械工程学报;1998-04
4 Wu Yanming Wang Zhisen;APPLICATION OF FUZZY INTEGRAL CONTROLLER WITH FEEDFORWARD IN SERVO SYSTEM[J];合肥工业大学学报(自然科学版);1997-06
5 Huang Shisheng; He Jianfeng (South China University of Technology) Pi Youguo (Hui Zhou University);Research of the Artificial Neural Network Fuzzy Control System for GTAW Welding Quality[J];惠州大学学报(自然科学版);1997-04
6 Wang Wenshun;The Comprehansive Description of the Applica-tions of Fuzzy Control in Process Contro[J];自动化仪表;1997-12
7 Zheng,Ying na Liu,Qiang (Guangdong University of Technology Guang Zhou 510643);New Method of Tuning Parameters in FC Using Cross Covariance Functions[J];仪器仪表学报;1997-03
8 Cheng Tao School of Mech. Sci & Eng., HUST, Wuhan 430074, China. Zuo Li Liu Yanming Yang Shuzi;A Study on the Adaptive Fuzzy Controller Based on On Line Self Adjustment of Parameters[J];华中理工大学学报;1996-11
9 Yu Jianrong et al.(Beijing Institute of Petrochemical Technolegy,Beijing,China);Present Status and Future Tendency of Fuzzy Control in Welding Application[J];中国机械工程;1996-05
10 Liu, Jia-yong; He,Qi-chao (Department of Radio Electronics sichuan Union Union University);Feedforward Control Based on Estimated Disturbance in Fuzzy Control System[J];仪器仪表学报;1996-04
【Co-references】
Chinese Journal Full-text Database 4 Hits
1 Cheng Tao School of Mech. Sci & Eng., HUST, Wuhan 430074, China. Zuo Li Liu Yanming Yang Shuzi;A Study on the Adaptive Fuzzy Controller Based on On Line Self Adjustment of Parameters[J];华中理工大学学报;1996-11
2 Xiong Xiaohong; Li Congxin; Huang Shuhuai(feet. i School of Mech. Set & Eng., HUST, Wuhan 430074, China.);Computer Control of a High-Speed Forging Press with Manipulators[J];华中理工大学学报;1996-05
3 LI Ping;SUN Youxian and ZHOU Chunhui(Institute of Industrial Process Control,Zhejiang University.Hangzhou,310027,PRC);Systematic Synthesis of an Optimal Fuzzy Controller[J];控制理论与应用;1995-01
4 Hu Zexin, Jiang Weisun(East China Institute of Chemical Technology);Intelligent Control for Industrial Processes[J];控制与决策;1991-03
【Secondary References】
Chinese Journal Full-text Database 5 Hits
1 JI Ping1,LIU Si-yan2,YE Wen-hua2(1.Jiangsu Maritime Institute,Jiangsu Nanjing,210007,China)(2.Nanjing University of Aeronautics and Astronautics,Jiangsu Nanjing,210016,China);An Embedded Machine Tool Condition Monitoring System for Intelligent DNC[J];中国制造业信息化;2012-11
2 XIE Mingli①,HU Zhanqi①,ZHAO Qichao①,JIA Qian②(①College of Mechanical Engineering,Yanshan University,Qin Huangdao 066004,CHN;②Mechanical Engineering Department,Hebei Technical College of Petroleum,Langfang 065000,CHN);Research on fuzzy adaptive control of grinding force of CNC cam grinder[J];制造技术与机床;2011-10
3 YI Huimin,ZHANG Ping(School of Electro-mechanical Engineering,Guangdong University of Technology,Guangzhou Guangdong 510006,China);Study on a New Data Interface of CAM/CNC System Based on STEP-NC[J];机床与液压;2011-14
4 Cheng Tao(Huazhong University of Science and Technology,Wuhan,China) Hu Chunhua Wu Bo Yang Shuzi p 1234 1238;On a Concept of Distributed Networked-Manufacturing System[J];中国机械工程;1999-11
5 Yang Shuzi(Huazhong University of Science & Technology,Wuhan,China) Wu Bo p 987 990;Survey of the NSFC Project: Intelligent Manufacturing Technology Foundation[J];中国机械工程;1999-09
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 Li Ping, Wang Hui, Qian Jixin, Sun Youxian (Institute of Industrial Process Control, Zhejiang University);Integral Function in Fuzzy Controller[J];模糊系统与数学;1993-01
2 Xiao Jun, Wang Jinzhang(Northeastern University);Application of Fuzzy Control in AGC System of Rolling Mill[J];控制与决策;1993-03
3 HU Jiayao WU Zhiqiao SONG Shoushan;Parameters Self-Adjusting Fuzzy-Pl Controller[J];信息与控制;1987-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved