Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Machine Tool & Hydraulics》 2004-06
Add to Favorite Get Latest Update

A Study about Analysis and Suppression Strategies of Vibration for the High Precision

Air-bearing Work-stage under the Drive of One-side Mode HU Jian-bing,ZHOU Yun-fei,ZHU Hong-guang,HU Ke-feng,WU Hao,LIU Ke- zhao (Huazhong University of Science and Technology,Wuhan 430073,China)  
In the part of high-precision air-bearing wo rk -stage, there are two drive modes, that is, one-side drive mode and two-side drive mode, in the stage.The demand of high synchro-control precision of two-s ide drive mode makes the implement of it very difficult in engineering practice. However,the one-side mode can avoid that problem but bring in strong vibration and unstable stability. In order to eliminate the disadvantages of vibration du e to the one-side drive mode and enable it to meet the demand of engineering ap plication, the relevant mathematic model was developed and some solving methods were also proposed by analysis of the model through three aspects: the stiffness of air membrane of the tracks, resonance frequency and acceleration design curv e.
【Fund】: 国家高技术研究发展计划攻关项目 (2 0 0 1AA4 2 3170 )
【CateGory Index】: TB535
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 7 Hits
1 Zhang Mei Fei Yetai Sheng Li Graduate student for doctorship,School of Instrument Science and Opto-electronic Engineering,Hefei University of Technology,230009,Hefei,China;Analysis of Dynamic Errors of CMM Under High-speed Measurement[J];Tool Engineering;2008-10
2 LI Dong-sheng,ZHANG Wen,YU Jing,LIN Jie-jun(College of Metrology and Measurement Engineering,China Jiliang University,Hangzhou 310018,China);Stiffness and Micro-Error Sources Analysis of Aerostatic Bearings[J];Journal of North University of China(Natural Science Edition);2011-06
3 Guan Chaoliang, Dai Yifan, Wang Jianmin, Yin Ziqiang(College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha 410073);Static and Dynamic Characteristics of an Air Bearing Guide Driven by a Linear Motor[J];Mechanical Science and Technology for Aerospace Engineering;2010-09
4 YANG Hong-tao1,LIU Yong1,FEI Ye-tai2,CHEN Xiao-huai2(1.School of Mechanical Engineering,Anhui University of Science & Technology,Huainan 232001,China;2.School of Instrument Science and Opto-Electronic Engineering,Hefei University of Technology,Hefei 230009,China);Dynamic error generated by air-bearing guide of coordinate measuring machine[J];Journal of Shenyang University of Technology;2011-01
5 LI Gang,XUE Cai-xia(Teaching Affairs Division,Anhui Vocational College of Electronics and Information Technology, Bengbu 233030,China);An Analysis of the Dynamic Characteristics of the Moving Beam of Glass Cutters[J];Journal of Wuyi University(Natural Science Edition);2011-02
6 Yang Hongtao1 Fei Yetai21.Anhui University of Science and Technology,Huainan,Anhui,232001 2.Hefei University of Technology,Hefei,230009;Research on Characteristic Parameter Optimization of Fast Probing CMM[J];China Mechanical Engineering;2008-20
7 LI Weiguang,NIE Xiaojun(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,CHN);The design of cutting mechanism for a plasma cutting machine[J];Manufacturing Technology & Machine Tool;2011-10
China Proceedings of conference Full-text Database 1 Hits
1 Lu Mingzhen Gao Sitian Shi Yushu Du Hua Cui Jianjun (National Institute of Metrology Beijing 100013 China);Research of Three-Dimensional Precision Air-bearing Stage with Small Rotatory Error[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 JIANG Chuan-jun(Huaibei Vocational Technical College,Huaibei,235000,China);THE ANALYSIS ON MECHANICAL METHOD OF STRUCTURE COMPUTE PROBLEMS[J];Journal of Anhui Institute of Architecture;2004-02
2 XIE Chang qing,YE Tian chun (The 3rd Lab of Microelectronics R&D Center,The Chinese Academy of Sciences,Beijing 100010,China);Extreme ultraviolet lithography technology[J];Semiconductor Information;2001-05
3 LI Yan qiu (Micro & Nano Fabrication Devision,Institute of Electrical Engineering,Chinese Academy of Sciences,Beijing 100080,China);The status and tendency of next generation lithography[J];Micronanoelectronic Technology;2003-Z1
4 WU Gang, ZHANG Xiao-ping (College of Telecommunication, Panzhihua Institute, Panzhihua 617000, China);Design of Active Low-Pass Second Order Filter[J];Ordnance Industry Automation;2005-04
5 ZHAO Hui jie ZHANG Guang jun (Beijing University of Aeronautics and Astronautics, School of Automation Science and Electronic Engineering);Factors Affecting the Precision of Heterodyne Interferometer[J];Journal of Beijing University of Aeronautics and Astronautics;2002-02
6 Fan Feng Liu Qiang (School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Principle of software commutation and application in vector control of AC linear motor[J];Journal of Beijing University of Aeronautics and Astronautics;2004-04
7 XU Mei-jun;Development and Market of Machinery for Architectural Glass Making[J];Glass & Enamel;2008-04
8 WANG Fang1, ZHANG Ying-Hui2, ZHAO Mei-ning1 (1. Xi'an Institue of Technology, Xi'an 7100332, China; 2 Kunming University of Technology, Kunming 650093, China);The Modal Analysis of Blanket Cylinder Based on ANSYS[J];Packaging Engineering;2005-04
9 Guo Qingding Zhao Ximei Weng Xiuhua (Shenyang University of Technology Shenyang 110023 China);Synchronous Control of Gantry Moving Type Boring-Milling Machining Centers Based-on Disturbance Observer[J];Transactions of China Electrotechnical Society;2005-09
10 LI Ruo-qing(The45th Institute of CETC,Yanjiao065201,China);The Pneumatic Structure Analysis of Step&Scan Stage[J];Equipment For Electronic Products Manufacturing;2003-03
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 GE Jian-zhong1,HUANG Song-qing2,GE Cong3(1.Dept.of Mech.Engn.,Wuhu Institute of Technology,Wuhu 241000,China;2.Elec.Auto.Dept.,Anhui University of Technology,Maanshan 243011,China);Probation into coordinates measuring strategy[J];Journal of Anhui University of Technology and Science(Natural Science);2010-04
2 Liu Yong Yang Hongtao;Research on Dynamic Characteristic of CMM Probe[J];Tool Engineering;2008-05
3 Guo Chengcao,Master,Lecturer,Mechanical & Electrical Engineering Department,Chengdu Electro-Mechanical College,Chengdu 610031,China;Research on Auto-adapted Sample Planning and Algorithm in Three-coordinate Measurement of Leaf Blade Profile[J];Tool Engineering;2010-10
4 PENG Yifan,YUAN Bo,CAO Xiangqun (NERC for Optical Instrument,State Key Laboratory of Modern Optical Instrumentation, ZhejiangUniversity,Hangzhou 310027,China);Technical status and developing trend of lithographic tools[J];Optical Instruments;2010-04
5 CAO Wei-feng(Yulin University,Yulin Shaanxi 719000,China);Research on Design of Two-dimensional Precision Positioning Stage Driven by Linear Motors[J];Equipment Manufacturing Technology;2012-09
6 FENG Ping;WEI Zhen-zhong;Key Laboratory of Precision Opto-mechatronics Technology of the Ministry of Education,Beihang University;;Light probe based large FOV 3D vision measurement system[J];Optics and Precision Engineering;2013-09
7 LI Dong-sheng,ZHANG Wen,YU Jing,LIN Jie-jun(College of Metrology and Measurement Engineering,China Jiliang University,Hangzhou 310018,China);Stiffness and Micro-Error Sources Analysis of Aerostatic Bearings[J];Journal of North University of China(Natural Science Edition);2011-06
8 YANG Hong-tao1,FEI Ye-tai2,CHEN Xiao-huai2,XIA Rui-xue2 (1.School of Mechanical Engineering,Anhui University of Science and Technology,Huainan Anhui 232001,China;2.School of Instrumentation Science and Opto-electronics Engineering,Hefei University of Technology,Hefei Anhui 230009,China);Analysis and Separation of Nano-CMM Error[J];Journal of Anhui University of Science and Technology(Natural Science);2010-03
9 WU Tian-feng,YANG Hong-tao (School of Mechanical Engineering,Anhui University of Science and Technology,Huainan Anhui 232001,China);Dynamic Correlation Error Modelling of CMM Based on nu-SVM[J];Journal of Anhui University of Science and Technology(Natural Science);2011-04
10 ZHAO Lei1,YANG Jie1,2(1.School of Mechanical and Electronic Information,China University of Geosciences, Wuhan Hubei 430074,China; 2.School of Engineering,The University of California,Merced California 95343,U.S);Dynamic Error Analysis of CMM Based on Solidworks Simulation[J];Machine Tool & Hydraulics;2012-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved