Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Mechanical & Electrical Engineering Magazine》 2008-04
Add to Favorite Get Latest Update

Optimal dynamic topology design of mechanical tool column with relative density

WANG Lie-long1,2,ZHU Zhuang-rui1(1.College of Mechanical Engineering,Southeast University,Nanjing 210096,China;2.Department of Mechanical and Electrical Engineering,Chizhou Institute,Chizhou 247000,China)  
Considering the relative density,the mathematical models of structural dynamic characteristic topology optimal design on continuum structures were established.Where structural relative density was taken as the design variable and maximum of the structure base frequency as the objective function,the structure operating condition and the relative volume rate as the constraints,the iteration was solved by heuristic optimized criterion.The dynamic topology optimization of mechanical tool column was designed by the method and the equivalent mass.After the dynamics simulation of optimized mechanical tool was made,its result greatly enhances new mechanical tool dynamic and static characteristics.Its result is presented to illustrate the correctness and efficiency of the proposed models and criterions.
【Fund】: 国家自然科学基金资助项目(50375026);; 安徽省高校省级自然基金资助项目(KJ2007B393ZC)
【CateGory Index】: TG502
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 Yongcun Zhang Lei Cui Lingfeng Zhou Dingxiong Yang Shutian Liu(State Key Laboratory of Structural Analysis for Industrial Equipment,Dept. of Engineering Mechanics,Dalian University of Technology,Dalian,116024);INNOVATIVE STRUCTURAL DESIGN FOR BED SADDLE OF MACHINE BASED ON TOPOLOGY OPTIMIZATION[J];Chinese Journal of Solid Mechanics;2011-S1
2 ZHANG Kai,LIU Chunshi,LI Yan,XIE Zhikun,WANG Yuewu(Shenyang Machine Tool(Group)Co.,Ltd.,Shenyang Liaoning 110142,China);The Development of HMS125p 4-axis Linkage High-accuracy Horizontal Machining Center[J];Machine Tool & Hydraulics;2011-24
3 RAO Liu-sheng,HOU Liang,PAN Yong-jun(Department of Mechanical and Electrical Engineering,Xiamen University,Xiamen361005,China);Improvement of the Rib Plate in Machine Tools Column Based on Topology Optimization[J];Machine Design & Research;2010-01
4 SHI Yan-hua, ZHOU Hua (Guangzhou Panyu Polytechnic, Guangzhou511400, China);Study of GSHM7060 4-axis Linkage Horizontal Machining Center[J];Mechanical & Electrical Engineering Technology;2009-05
5 WANG Qing-fu1,ZHAO Hong-lin1,LI Dian-xin1,WU Zhi-heng2,ZHANG Hua-wei2,ZHANG Guang-peng3,MU Dong-hui4,CHEN Shi-guang1(1 China University of Petroleum (Beijing),Beijin102249,China;2 Guangdong Machinery Research Institute,Guangzhou 510635,China;3 Xi'an University of Technology,Xi'an 710054,China;4 Beijing No.2 Machine Tool Works Co.;Ltd.Beijin 100072,China);Research on Model Simplification and Characteristics Recurrence from Global Machine[J];Mechanical & Electrical Engineering Technology;2010-12
6 ZHANG Guo-tai, YIN Zhi-hong (Kunming University of Science and Technology, Yunnan Kunming, 650500, China);The Mechanical Properties Analysis and Topology Optimization Design of CNC Lathe Spindle Box[J];Manufacture Information Engineering of China;2012-19
7 XIONG Si-chang,ZHOU Qing,LIU Xiao-qiang(Key Laboratory of Special Purpose Equipment and Advanced Machining Technology of Ministry of Education/Zhejiang Province,Zhejiang University of Technology,Hangzhou 310014,China);Machine Dynamic Characteristic Analysis with Considering Oil Film Joint Surface[J];Light Industry Machinery;2011-05
8 Wu Fenghe1,2 Qiao Lijun1 Yang Yulin1 Wang Yuehong2 1.Yanshan University,Qinhuangdao,Hebei,066004 2.Qiqihaer No.2 Machine Tool(Group) Co.Ltd,Qiqihaer,Heilongjiang,161005;Column Structure Optimization of Super-heavy-duty CNC Floor Boring and Milling Machine[J];China Mechanical Engineering;2011-21
9 NING Jian-rong1,2,XIA Jia-kuan2,SHEN Li2,WANG Cheng-yuan2(1.School of Mechanical Engineering,Shenyang University of Chemical Technology,Shenyang 110142,China;2.School of Electrical Engineering,Shenyang University of Technology,Shenyang 110178,China);Design of Reduce Vibration for Linear Feed System of High Precision Machine Tool Based on Topology Optimization[J];Modular Machine Tool & Automatic Manufacturing Technique;2012-12
【Citations】
Chinese Journal Full-text Database 3 Hits
1 WANG Lie- long1,2, ZHU Zhuang- rui2, SUN Qing- hong2 ( 1.Dep. of Mechanical and Electrical Engineering, Chizhou Teachers College, Chizhou 247000, China; 2.Dep. of Mechanical Engineering, Southeast University, Nanjing 210096, China);Research on Identification of the Structural Interface Parameter of Machine Tool Orbit with Slip Mass[J];Mechanical Engineer;2006-09
2 Chen Jianjun; Che Jianwen; Cui Mingtao; Dai Jun; Ma Hongbo School of Electronic Mechanical Engineering, Xidian University, Xi'an 710071, China;A REVIEW ON STRUCTURAL DYNAMIC OPTIMUM DESIGN[J];Advances In Mechanics;2001-02
3 YANG De qing 1, LIU Zheng xing 1, SUI Yun kang 2 1.School of Civil Engrg. & Mech., Shanghai Jiaotong Univ., Shanghai 200030, China; 2.Beijing Polytechnic Univ., Beijing 100022, China;ICM Method for Topology Optimization Design of Continuum Structures[J];JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY;1999-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Joseph Cadman.Shiwei Zhou.Yuhang Chen Wei Li.Richard Appleyard.Qing Li School of Aerospace,Mechanical and Mechatronic Engineering, The University of Sydney,Sydney,NSW 2006,Australia Faculty of Medicine,The University of Sydney,Sydney, NSW 2006,Australia;Characterization of cuttlebone for a biomimetic design of cellular structures[J];力学学报(英文版);2010-01
2 YE Hong-ling, SUI Yun-kang (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);Topological Optimization of Continuum Structure With Stress Constraints Based on ICM Method[J];Journal of Beijing Polytechnic University;2005-S1
3 YE Hong-ling, SUI Yun-kang (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);Tbpological Optimization of Continuum Structure Under Stress Constraints[J];Journal of Beijing University of Technology;2006-04
4 ZHAO Yan-fei, SUI Yun-kang, YE Hong-ling (Numerical Simulation Center for Engineering, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China);Optimum Design of Shell Structures With Frequency Constraints Based on Response Surface Methodology[J];Journal of Beijing University of Technology;2006-S1
5 LONG Kai,ZUO Zheng-xing,LI Tao,XIAO Tao (School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Dynamic Shape Optimization Based on Continuum Derivatives[J];Transactions of Beijing Institute of Technology;2006-08
6 LONG Kai,ZUO Zheng-xing,XIAO Tao(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Shape Optimization Under Harmonic Excitation Based on Efficient Difference Sensitivity Analysis[J];Transactions of Beijing Institute of Technology;2006-09
7 LONG Kai,ZUO Zheng-xing(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Topology Extraction in the Topological Optimization of Continuum Structure Based on Nodal Density[J];Transactions of Beijing Institute of Technology;2008-08
8 LONG Kai,ZUO Zheng-xing(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Perimeter Control with Variational Upper-Bound Based on Nodal Independent Continuous Mapping Method[J];Transactions of Beijing Institute of Technology;2009-04
9 HAN Lipin(Sinoma Science & Technology Co.Ltd,Nanjing 210012);Effects of Central Column Connection in Long-Span Portal Frame on Glass Fiber Plant Building Cost[J];Fiber Glass;2010-04
10 HUANG Hai-yan 1,LIN Zhi-xiang 2,WANG De-yu3(1 School of Naval Architecture and Ocean Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003,China;2 School of Water Resources,Hydraulic Power and Architecture.Yunnan Agricultural University, Kunming 650201,China;3 State Key Laboratory of Ocean Engineering,Shanghai Jiao Tong University,Shanghai 200030,China);Multi-objective optimization of ship stern under static and seismic loading[J];Journal of Ship Mechanics;2011-11
China Proceedings of conference Full-text Database 10 Hits
1 Zhang Tieliang,Ding Yunliang,Jin Haibo,Zhang Zhenming (Key Laboratory of Fundamental Science for National Defense-Advanced Design Technology of Flight Vehicle, Nanjing University of Aeronautics and Astronautics,Nanjing,210016,P.R.China);Optimization Design for Satellite Trusses[A];[C];2011
2 LONG Kai,Rehan H.Zuberi,ZUO Zhengxing(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Homogenization Topology Optimization Method Based on Continuous Field[A];[C];2009
3 Li Xiang,Wang Hao(Department of Mechanics and Engineering Science,Fudan University,Shanghai,200433,China);Dynamic Response Topology Optimization Under Harmonic Foundation Excitation[A];[C];2010
4 Li Wei Hao Zhiming(Institute of Systems Engineering,China Academy of Engineering Physics,P.O.Box 919-419,Mianyang,Sichuan 621900);The application of Evolutionary Structural Optimization in the design of a centrifuger nacelle[A];[C];2010
5 SUI Yun-kang , YE Hong-ling, DU Jia-zheng (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100022, China);DEVELOPMENT OF STRUCTURAL TOPOLOGICAL OPTIMIZATION AND IMMINENCY OF ITS MODEL TRANSFORMATION INTOINDEPENDENT LEVEL[A];[C];2005
6 Li fu-qiang Hu wei-bing (School of civil Engineering Xi'an Univ.of Arch & Tech.Xi'an 710055);Optimum Structural Design Based on ANSYS[A];[C];2007
7 SUI Yun-kang YE Hong-ling LIU Jian-xin CHEN Shi YU Hui-ping (Numerical Simulation Center for Engineering,Beijing University of Technology,Beijing 100022,China);A STRUCTURAL TOPOLOGICAL OPTIMIZATION METHOD BASED ON EXPLORING CONCEPTUAL ROOT[A];[C];2008
8 He Li,Cheng Yuansheng (School of Naval Architecture and Ocean Engineering,Huazhong University of Science and Technology,Wuhan Hubei 430074,China);Dynamic response optimization of grillage structures using equivalent static algorithm[A];[C];2009
9 Wang Huhu,Hong Ming (School of Naval Architecture Engineeng Mingring,Faculty of Vehicle Engineering and Mechanics,State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,Dalian Liao ning 116042,China);The dynamic optimization of the closed-wide mast of the naval vessel[A];[C];2009
10 Huang Lang 1 Zhao Xin 2 (1.Department of Building Engineering, Tongji University, Shanghai 200092; 2.Tongji Architectural Design (Group) Co., Ltd, Shanghai 200092);The Optimization Transformation Analysis of Existing High-rise Building Structure Based on the Environmental Costs[A];[C];2013
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 XIAO Jian,WANG Ke-she(School of Electromechanical Engineering,Beijing Information Science and Technology University,Beijing 100101,China);Topology optimization design of direct-drive double-angle milling head[J];Journal of Beijing Information Science & Technology University;2009-03
2 XIONG Hui(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Multiobjective Optimization of Pavement Management Using Compromise Programming[J];Transactions of Beijing Institute of Technology;2006-09
3 YANG De-qing, LIU Yong-jun, JIN Xian-ding (Research Institute of Structural Mechanics,School of Naval Architecture and Ocean Engineering,Shanghai Jiao long Universily.Shanghai 200030, China; Northern Jiaotong University,Beijing 100044,China) E-mail address: yangdq@sjtu.edu.cn (yang De-qing);Structural Topology Optimal Design to Reduce Vibration and Noise of Thin Plate[J];Journal of Ship Mechanics;2003-05
4 ZHANG Shou\|bing, WU Chang\|chun, FENG Miao\|lin, YUAN Zhen (Mechanics and Mechanical Enginering Department, University of Science and Technology of China, Hefei\ 230026,China);Microscopic Investigation of Cellular Materials Mechanical Properties Based on Homogenization Theory[J];Materials Science and Engineering;2001-04
5 RONG Jian hua 1, XIE Yi min 2, JIANG Jie sheng 3, XU Bin 3, FU Jun qing 1 (1.Automobile and Mechatronic Eng. Dept., Changsha Comm. Univ., Changsha 410076, China; 2.Faculty of Engineering and Science, Victoria University of Technology P. O. Box;Present Situation and Development of Evolutionary Structural Optimization Method[J];Journal of Changsha Communications University;2001-03
6 LUO Tian-yu1,LUO Ji-wei2(1.Henan University of Science & Technology,Luoyang 471003,China;2.Luoyang Bearing Science and Technology Co.Ltd.,Luoyang 471039,China);Elastic Approach of Cylindrical Roller[J];Bearing;2009-06
7 LIU Yang,Li Jing-kui,ZHU Chun-xia,CAI Guang-qi(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China.);Influence of Linear Rolling Guide Joint on Dynamic Behavior of NC Machine Tools[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2006-12
8 Sun GangSun WeiYue YimingZhang Yujin;DEVELOPMENT TENDENCY OF HEAVYDUTY SCREENING MACHINE[J];COAL TECHNOLOGY OF NORTHEAST CHINA;1999-01
9 SI Ji-kai1,2,WANG Xu-dong1,CHEN Hao2,YUAN Shi-ying1,JIAO Liu-cheng3 (1.College of Electrical Engineering and Automation,Henan Polytechnic University,Jiaozuo 45400,China;2.School of Information and Electrical Engineering,China University of Mining and Technology,Xuzhou 221008,China;3.Henan Normal University,Xinxiang 453000,China);Analysis of the slot-teeth component in permanent magnet linear synchronous motor at the outlet end[J];Electric Machines and Control;2008-05
10 LIU Song-guo,ZHU Shi-qiang,WU Wen-xiang (State Key Lab of Fluid Power Transmission and Control,Zhejiang University,Hangzhou 310027,China);Smoothness-optimal trajectory planning method with constraint on traveling time for manipulators[J];Electric Machines and Control;2009-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Yongcun Zhang Lei Cui Lingfeng Zhou Dingxiong Yang Shutian Liu(State Key Laboratory of Structural Analysis for Industrial Equipment,Dept. of Engineering Mechanics,Dalian University of Technology,Dalian,116024);INNOVATIVE STRUCTURAL DESIGN FOR BED SADDLE OF MACHINE BASED ON TOPOLOGY OPTIMIZATION[J];Chinese Journal of Solid Mechanics;2011-S1
2 LIU Yu,HU Yue,WU Fei(Shanghai micro electronics equipment Co.,Ltd,Shanghai 201203,China);Topological Lightweight Design of Rectangle Mirror of Wafer Stage[J];Equipment for Electronic Products Manufacturing;2013-05
3 WANG Mingxu;YAN Li;School of Mechanical & Electrical Engineering,Henan University of Technology;;Review of Structure Thermodynamics Topological Optimizing Method for Fiber Reinforced Resin Concrete Material Based Basic Parts of CNC Machine Tools[J];Materials Review;2015-15
4 XIN Yi-bing;GAO Yue-fei;LIU Hai-tao;LIU Song;REN Jie;North University of China;Shanxi University;;Design of an Automatic Lifting Conveying Platform[J];Packaging Engineering;2015-17
5 ZHANG Kai1,LIU Chunshi1,LI Yan1,JIA Yazhou2(1.Shenyang Machine Tool(Group)CO.,LTD.,Shenyang Liaoning 110142,China; 2.Jilin University,Changchun Jilin 130025,China);Measures to Elevate Reliability of Horizontal Machining Center[J];Machine Tool & Hydraulics;2012-03
6 ZHANG Kai,LI Yan,QI Yuan-da,MA Yun-peng,MIAO Zhuang(Shenyang Machine Tool(Group) Co.,Ltd.,Shenyang 110142,China);The Structure Characteristic and Technical Performance of a Large Four Axis SimultaneousMotional High Accuracy Horizontal Machining Center[J];Mechanical Engineer;2011-03
7 WANG Min-feng1,2,ZHAO Yun2(1Faculty of Mechanical & Electrical Engineering,Jiaxing University,Jiaxing 314001,China)(2College of Mechanical and Electrical Engineering,Jiangxi University of Science & Technology,Ganzhou 341000,China);Improved Design and Finite Element Analysis for Power Cutter-Tower Pillar of Multi-Function Lathe[J];Machinery Design & Manufacture;2012-09
8 ZHANG Jianzhong,SHEN Yanhe,LI Zipeng(Department of Mechanical Engineering,Yellow River Conservancy Technical Institute, Kaifeng Henan 475004,China);Configuration Design of Horizontal Drilling Tapping Machine with Centering Position for Bolt Ball[J];Machine Tool & Hydraulics;2013-04
9 Yang Yong1 Zhang Weimin1,2 Yang Tao1(1.School of Mechanical Engineering,Tongji University,Shanghai 201804,China 2.Chinese-German School for Postgraduate Studies,Tongji University,Shanghai 200092,China);Dynamic Characteristic Optimization of Feed System Based on Kriging Metamodel[J];Transactions of the Chinese Society for Agricultural Machinery;2013-05
10 YUAN Qingke,LUO Sihe,DOU Wei(Guangdong University of Technology,Guangzhou Guangdong 510006,China);Performance Analysis and Topological Optimization for Multiple-spindle Headstock[J];Machine Tool & Hydraulics;2013-11
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Li Fusong(Xi'an Electrical Mechanical Information Institute, Xi'an, 710065)Chen Jianjun(Xidian University);DYNAMICAL OPTIMUM DESIGN OF THE MECHANICAL OSCILLATION SYSTEM IN FLUIDIC GENERATOR[J];ACTA ARMAMENTARII;2000-01
2 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
3 Lin Shuzhi(China Construction Northeast Design Institute)Cheng Gengdong(Dalian University of Technology);MODE SPACE METHOD FOR SENSITIVITY ANALYSIS OF DYNAMIC RESPONSE[J];Earthquake Engineering and Engineering Vibration;1990-03
4 Zhao Yangang Sun Jingjiang (Institute of Engineering Mechanics, SSB);ON DYNAMIC SENSITIVITY ANALYSIS OF STRUCTURES[J];Earthquake Engineering and Engineering Vibration;1991-04
5 Lin Jiahao;Optimum Design of Structures with Specified Non-Frequency-Band[J];;1981-01
6 Zhong Wanxie, Cheng Gengdong (Research Institute of Engineering Mechanis of DIT);A Second Order Sensitivity Analysis of Multieigenvalue and the Corresponding Optimization Algorithm[J];;1985-01
7 Zhang Xiangwei Xu Meihe;VARIABLE DAMP STRUCTURAL RELIABILITY DUE TO MULTIPLE RANDOM EXCITATIONS AND SENSETIVITY ANALYSIS[J];Journal of Chongqing University(Natural Science Edition);1991-04
8 Xia Renwei and Wang Liping Beijing University of Aeronautics and Astronautics;OPTIMUM DESIGN OF COMPOSITE STRUCTURES SUBJECTED TO STATIC AND DYNAMIC CONSTRAINST[J];Acta Materiae Compositae Sinica;1989-02
9 Wang Jian (Shandong Institue of Agricultural Machine);THE INFLUENCE OF INTERENT FREQUENCIES FOR OPTIMUM RESULTS IN STRUCTURE OPTIMIZATION[J];Engineering Mechanics;1990-03
10 Wang Sheng-hong (Shanghai University of Science and Technology);MINIMUM WEIGHT DESIGN SUBJECT TO STRUCTURE FREQUENCY CONSTRAINT[J];Acta Mechanica Solida Sinica;1982-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved