Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Mechanical & Electrical Engineering》 2015-11
Add to Favorite Get Latest Update

Effects of capillary overhang length on the vibration characteristics of ultrasonic acoustic system

ZHANG Yun-dian;FENG Gang;College of Mechanical Engineering,Hangzhou Dianzi University;  
Aiming at the problems of the effects of capillary overhang length on acoustic resonance frequency and capillary tip amplitude,the integral equation of transducer and amplitude transformer was pulled,and the finite element model of ultrasonic wire bonding acoustic system was built. The finite element modal analysis was investigated. The figure of system vibration mode,resonance frequency and capillary tip amplitude relative to different relative offset were obtained. Thus scatter charts of relative offset with resonance frequency of acoustic system and relative offset with capillary tip amplitude were gotten through changing the capillary relative offset. At the same time the function relationship was set up. The finite element analysis results were evaluated on the Agilent impedance analyzer,the vibration parameters were tested. The results indicate that the simulation results are in agreement with the test results. Through changing the capillary overhang length,the resonant frequency and the tip amplitude of acoustic system can be changed. When the capillary overhang length is about 2 mm,the amplitude reaches the maximum. And the capillary overhang length has little effects on vibration mode of the system. Besides the adjacent modes are far away from the main mode which can effectively avoid aliasing.
【CateGory Index】: TB533;;TH113.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 LIN Shuyu ZHANG Mingduo (Applied Acoustics Institute, Shanxi Teachers University,Xian 710062);Study on the vibrational characteristics of longitudinal -flexural composite systems[J];Technical Acoustics;1996-02
2 ZHAO Puling FENG Dongju GUO Dongming FANG Yaying(School of Mechanical Engineering, Dalian Univ. of Technol. Dalian 116024);Design of horn using four-end network method[J];Acta Acustica;2002-06
Chinese Journal Full-text Database 10 Hits
1 ZHANG Heng et al (School of Life Sciences and Chemical Engineering,Huaiyin Institute of Technology,Huaian,Jiangsu 223003);Determination of Melamine by Infrared Spectroscopy Based on Nonlinear Modeling[J];Journal of Anhui Agricultural Sciences;2011-01
2 CHEN Lian,WANG Qishen(Physics Department of Anqing Teachers Collgeg,Anqing 246011,China);Disscussion of Eigen State of Spring with Mass CountedParticle Vibrating System[J];Journal of Anqing Teachers College(Natural Science Edition);2002-04
3 ZHANG Lihua, XU Yingxun (physics Dept. of Anqing Teachers college, Anqing 246011, China);Measurement on Yong's Modulus by Means of Vibration[J];Journal of Anqing Teachers College(Natural Science Edition);2003-02
4 Yao Gang,Han Lei (College of the Electromechanical Engineering,Central South University,Changsha 410083,China);Study on Electricity Characteristic of Ultrasonic Transducer System[J];Semiconductor Technology;2008-06
5 Xi Jianfei,Zhang Fanghui(College of Electrical and Information Engineering,Shanxi University of Science & Technology,Xi'an 710021,China);Effect of Substrate Surface Smoothness on Thin Al Wire Wedge Bonding Strength[J];Semiconductor Technology;2009-11
6 Bi Xiangdong1,Xie Xinpeng2,Hu Jun1,Li Guoyuan2(1.Guangdong Yuejing High-Tech Co.,Ltd.,Guangzhou 510663,China;2.School of Electronic and Information Engineering,South China University of Technology,Guangzhou 510063,China);Process Optimization for Aluminum Wire Bonding Based on DOE and BP Neural Network[J];Semiconductor Technology;2010-09
7 JIA Yu bin 1, HAO Yi long 1,ZHONG Ying 2, ZHANG Rong 3 (1. Institute of Microelectronics, Peking University, Beijing 100871,China; 2. Precision Measurement Technology and Instrument, Tianjin University, Tianjin 300072, China; 3. Precision Measurement Technology and Instrument, Tsinghua University, Beijing 100084, China);Micromachined accelerometer based on resonant principle[J];Micronanoelectronic Technology;2003-Z1
8 HE Gao-fa1,2,TANG Yi-ke1,2,HE Xiao-ping3,LIU Shi-ming2 (1.College of Mechanical Engineering,Chongqing University,Chongqing 400030,China;2.Department of Mechanical Engineering,Chongqing Institute of Science and Technology,Chongqing 400050,China;3.Institute of Electronic Engineering,CAEP,Mianyang 621900,China);Design and Analysis of a Novel Micro Resonant Accelerometer[J];Micronanoelectronic Technology;2007-Z1
9 SHU Ge qun, RAO Li, LIN Jian sheng, LU Xing cai (School of Mechanical Engineering,Tianjin University, Tianjin 300072, China);Study on the TorsionandFlexureCoupled Free Vibration of continuous Shaft[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2000-04
10 CHEN Qing-wei,GUO Jian,WANG Xiao-hua,HU Wei-li (Department of Automation,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu,China);Vibration Suppression of Flexible Arm Based on State Feedback Control[J];Acta Armamentarii;2006-01
China Proceedings of conference Full-text Database 10 Hits
1 WU Min~(1,2),YANG Jinfu~1,Huang Guojun~3,Zhang Zhanyi~1,HAN Dongjiang~1,LIU Yuhan~(1,4) (1,Institute of Engineering Thermophysics,CAS,Beijing,100190,China) (2,Full Three Dimension Power Engineering Co.Ltd.,CAS,Beijing,100190,China) (3,Institute of Mechanics,CAS,Beijing,100190,China) (4,Liaoning Shihua University,Liaoning,113001,China);Modal Analysis Research of Single-disc Rotor System[A];[C];2011
2 WANG Kao,TAO Jun-yong,CHEN Xun (Research Institute of Mechatronics Engineering, College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha 410073, China);The response analysis of repetitive shock machine excited by a single vibrator[A];[C];2007
3 LI An-ning,LIAN Xue-hai,JIN Da-yuan (The 36th Research Institute of CETC, Jiaxing Zhejiang 314033, China);Wire Bonding Techniques for Microwave Hybrid Circuit[A];[C];2008
4 CAI Ming,LIU Xiao-ming,ZHU Zhong-gan,SUN Chao,XIAO Song (University of Electronic Science and Technology of China,Chengdu 611731,China);Structural Vibration Analysis and Design Improvements in the FOG[A];[C];2011
5 Zhan Wang~1 Jianggang Li~2 Jianrong Pan~1 (1.State Key Laboratory of Subtropical Building Science,South China University of Technology,Guangzhou 510641 2.Guangzhou Jinhai design Ltd,Guangzhou,510040);Finite Element Analysis of Steel Frame Attached with Metallic Damper[A];[C];2010
6 LIU Shiqing LIN Shuyu (Applied acoustics institute of ShanXi Normal University, Xi抋n 710062);The effect of the geometry dimension of tool on the ultrasonic torsional vibration system[A];[C];2003
7 FU Wei-chun~1 SUN Xiao-qing~1 WU Sheng-ju~1 BAI Cheng~2 (1.Institute of Applied Acoustics,Shaanxi Normal University,Xi'an 710062 Shaanxi,China; 2.Xi'an Communication College,Xi'an 710106 Shaanxi,China);Study of cosine-torsional vibration ultrasonic horn[A];[C];2007
8 YUE Zheng,LI Zhi-yuan (Hefei University of Technology,Hefei 230009,China);Research on vibration absorber of power system in gas-engined forklift[A];[C];2009
9 HE Gao-fa~(1,2) TANG Yi-ke(1,2) HE Xiao-ping~3 LIU Shi-ming~2 (1.College of Mechanical Engineering,Chongqing University,Chongqing 400030,China; 2.Department of Mechanical Engineering,Chongqing Institute of Science and Technology,Chongqing 400050,China; 3.Institute o f Electronic Engineering,CAEP,Mianyang 621900,China);Design and Analysis of a Novel Micro Resonant Accelerometer[A];[C];2007
10 SUN Wen-sin (Dalian Locomotive & Rolling Stock Co..Ltd,Technology Department.Dalian 116022 Liaoning,China);Research of 16V265H Diesel Engine Body Vibratory Aging Technology[A];[C];2011
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 FENG Dong-ju~1, ZHAO Fu-ling~(*1), XU Zhan-guo~2, GUO Dong-ming~1 Dalian Univ. of Technol., Dalian 116024, China; 2.School of Electr. and Inf. Eng., Dalian Univ. of Technol., Dalian 116024, China );Influence of ultrasonic tools on resonance performance of composite horn[J];Journal of Dalian University of Technology;2004-05
2 ZHU Wu, ZHANG Jia-min (Dept. of Information and Control Technology, Shanghai University of Electric Power, Shanghai200090,China);Designing and Performance Analysis of Ultrasonic Vibration System[J];Journal of Shanghai Institute & Electric Power;2004-03
3 Zheng Jianxin Liu Chuanshao Zhao Bo et al;Research and Application of Local Resonance Phenomenon in Ultrasonic Vibration Drilling[J];Tool Engineering;2003-02
4 LAI Yi - nan; LIU Xiang-dong; LUO Jian- wei; JIN Chang- shan ( School of Mcchatronic Engineering, HIT, Harbin 150001, China; Harbin HBC Valve Company LTD, Harbin 150040, China);Analyzing Ultrasonic Horn System by Finite Element Method[J];Journal of Harbin University of Science and Technology;2001-01
5 SUN Lu-yong, ZHOU Yi, ZHANG Yun-dian (School of Mech-electronic Engineering , Hangzhou Dianzi University , Hangzhou Zhejiang 310018 , China);Development of Parameter Calculating Software for Ultrasonic Amplitude-bar[J];Journal of Hangzhou Institute of Electronic Engineering;2004-03
6 YUAN Feng-xia, ZHANG Hui-jun, ZHU Guo-liang(Department of Mechanical Automation, Shanghai University, Shanghai 200072, China);Optimum Design of Acoustic Horns for Ultrasonic Machining Using ANSYS[J];Mechanical Engineer;2004-11
8 HE Xi-ping, HU Shi-yue (School of Architectural Engineering Mechanics,State Key Laboratory of Mechanical Structural Strength Virbration,Xi'an Jiaotong University,Xi'an,710049,China);Simplified design methods for compound ultrasonic longitudinal vibrating horn[J];Journal of Lanzhou University;2002-05
9 DAI Xiangguo~1, GU Zhengwei~1, FU Shuigen~2, ZHANG Xuezheng~2(1. Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China; 2. Industrial Training Center, Tsinghua University, Beijing 100084, China);Relation between amplified pole link structure and energy transmission[J];Journal of Tsinghua University(Science and Technology);2004-02
10 HE Xi-ping,GAO Jie(Applied Acoustics Institute,Shaanxi Normal University,Xi'an 710062,China);A review of ultrasonic solid horn design[J];Technical Acoustics;2006-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved