Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Laser Technology》 2013-06
Add to Favorite Get Latest Update

Experimental study about dressing bronze-bonded diamond grinding wheels with pulsed fiber laser

CHEN Gen-yu;LI Zong-gen;DENG Hui;YUAN Bo;CHEN Jun;State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University;Laser Research Institute,Hunan University;  
In order to find a new method to dress super-abrasive grinding wheels,experiments were carried out on bronze-bonded diamond grinding wheels with a pulsed fiber laser irradiating in radial orientation. Its basic principle was analyzed. After the ablation of bronze-bonded wheel by means of a pulsed fiber laser,the surface morphology and depth of ablated craters were observed by 3-D video microscopy system with super depth of field and surfagauge,and the influences of laser average power,pulse repetition frequency and defocusing amount on the ablation effect were summarized.According to the experimental results,the laser dressing experiments were carried out with the best process parameters( P m= 20W,f = 70kHz,Δ = 0. 0mm),and the surface topography after laser dressing was observed by a 3-D video microscopy system with super depth of field. The results show that,dressing of bronze-bonded diamond grinding wheels with a pulsed fiber laser irradiating in radial orientation can bring out good dressing effect with the reasonable processing parameters.
【Fund】: 国家工信部“高档数控机床与基础制造装备”科技重大专项资助项目(2012ZX04003-101)
【CateGory Index】: TG743
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved