Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Diamond & Abrasives Engineering》 2005-02
Add to Favorite Get Latest Update

Analysis on Green Properties of Quick-point Grinding

Xiu Shichao Cai Guangqi Gong Yadong (School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China)  
The technical characteristics and the grinding properties of Quick - point Grinding were analyzed. It is shown that the characteristics are ultra -high grinding speed, thin super abrasive wheel, point grinding and CNC machinin. The main grinding properties are low grinding forces and temperature, high G - ratio, good surface integrity and high precision. Based on the theory of green manufacture, the main research content and the direction were presented to attain green Quick - point grinding by the research and analysis of the grinding mechanism and the green properties of Quick - point Grinding. According to the progress of the new technology, the importance was discussed to research the theory and the application of Quick - point Grinding for green manufacture.
【Fund】: 教育部科学技术研究重点项目(104190)
【CateGory Index】: TG596
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 HOU Ya-li1,LI Chang-he2,LU Bing-heng2 (1.Qingdao Technological University,Qingdao 266033,China;2.State Key Laboratory for Manufacturing Systems Engineering,Xi'an Jiaotong University,Xi'an,710049,China);Key Technology and Application of Super-high Speed Grinding Machining[J];Bearing;2009-03
2 Xiu Shichao Yuan Suoxian Cai Guangqi(School of Mechanical Engineering and Automation,Northeastern University,Shenyang 110004,China);Calculations of coolant supply parameters in quick-point grinding for green manufacturing[J];Diamond & Abrasives Engineering;2006-03
3 Xiu Shichao1 Feng Qiang1 Wang Yao2(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China)(2.School of Mechanical Engineering,Hebei University of Technology,Tianjin 300130,China);Analysis of index system and influence elements on greenness assessment of grinding process[J];Diamond & Abrasives Engineering;2007-03
4 WANG Chang-chun ( Weifang University , Weifang 261061 , China);Green Process in the Farm Machinery Manufacture Industry[J];Journal of Agricultural Mechanization Research;2007-08
5 ;Study on the influence of wheel periphery grinding parameters on quick-point grinding accuracy[J];Precise Manufacturing & Automation;2008-04
6 Cai Guangqi Xiu Shichao (School of Mechanical Engineering & Automation,Northeastern University, Shenyang 110004,China);Key technology and equipment of super-high speed grinding[J];World Manufacturing Engineering & Market;2007-03
7 Luo Yumei1,2 Wu Qi1 Hu Dejin1 1.Shanghai Jiao Tong University,Shanghai,2002402.Shanghai Vocational School of CAAC,Shanghai,200232;Study on Normal Tracking in NC Quick-point Grinding of Curve Parts[J];China Mechanical Engineering;2008-01
8 WANG Jinbao, WANG Jiyu, WANG Libo, LI Wenwei (School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, CHN);Study on Key Technology of Quick-point Grinding Wheels[J];Manufacturing Technology & Machine Tool;2008-07
9 LI Changhe1,3,CAI guangqi2,DING Yucheng3,LU Bingheng1 (1. State Key Laboratory for Manufacyuring System Engineering, Xi’an Jiaotong University, Xi’an 710049; 2. School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004; 3. School of Mechanical Engineering, Qingdao Technological University, Qingdao, Shandong 266033);Key technology and application for super-high speed grinding machining[J];Sciencepaper Online;2008-08
【Citations】
Chinese Journal Full-text Database 6 Hits
1 Huaiyin Institute of Industry Ye Weichang;New Development of CBN Wheel[J];NEW TECHNOLOGY & NEW PROCESS;2000-11
2 Liao Lan □Liu Fei,Yin Chao;Study of green properties for high-speed and super high-speed grinding[J];Machinery Manufacturing Engineer;2001-04
3 ;Review of Abrasive and Abrasive Tools at CIMT2001[J];World Manufacturing Engineering&Market;2001-04
4 CAI Guang qi, et al. (Northeastern University, Shenyang 110006, China);The new progress of abrasive grinding technology[J];World Manufacturing Engineering&Market;2003-01
5 LIU Fei(Chongqing University, Chongqing,China) CAO Huajun;The Theory Framework of Green Manufacturing[J];CHINA MECHANICAL ENGINEERING;2000-09
6 ZHAO Changming,LIU Wanju (Training Center,China No.1 Vehicles Group,Changchun 130011,CHN);CNC Quick Point Grinding Process and Its Application[J];Manufacturing Technology & Machine Tool;2004-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 DING Jia-li,WAN Si-min(Zigong Cemented Carbide Corp.,Ltd,Zigong,Sichuan 643011,China);Study of Processing Quality of High Quality Carbide Anvils[J];Sichuan Nonferrous Metals;2006-03
2 Wang Xuejun1, Wang Shuyuan2, He Jingliang1, Liu Bin3, Zhou Guoan3(1.Beijing Information Science and Technology University, Beijing 100192, China; 2. Petro China Gas Fuel Co., Ltd., Beijing 100032,China;3.The 45th Research Institute, CETC, Beijing 101601, China);Design of CMP End-Point Detector[J];Semiconductor Technology;2008-08
3 ZHANG Yan1,JIA Hai-xia2 (1.School Of Chemistry And Environmental Engineering, Jianghan University, Wuhan 430056, China; 2.Environmental Protection Bureau Of Shuibin,Shuibin 156200,China);On Fuzzy Assessment Mode And Application Of Enterprises Green Degree[J];North Environment;2005-03
4 ZHANG Hua, WANG Xi-bin (School of Mechanical Engineering and Vehicle, Beijing Institute of Technology, Beijing 100081, China);Green Assessment of Manufacturing Process of Powder Based on the Data Envelopment Analysis[J];Chinese Journal of Explosives & Propellants;2004-04
5 GUO Li1, YANG Chao2, QING Qi-xiang1, ZHANG Guo-hua1 (1 College of Mechanical and Automotive Engineering, Hunan University, Changsha Hunan 410082; 2 HAIJIE Manufacture Co. Ltd, Hunan University, Changsha Hunan, 410082);Heat Penetration in High Efficiency Deep Grinding (HEDG) Including a Transient Analysis[J];;2005-02
6 DING Ming-lianga,LIN Chang-huab,GONG Jianb(a.School of Biological Engineering;b.Chongqing Institute of Automobile,Chongqing Institute of Technology,Chongqing 400050,China);Flexibility Abrasive Deburring Technology for Revolving Object[J];Journal of Chongqing Institute of Technology(Natural Science Edition);2007-09
7 WANG Weilang~1,PAN Fusheng~1,CHEN Yanjun~2,HUANG Yun~2,PENG Xiaodong~2(1 College of Materials Science and Engineering,Chongqing University,Chongqing 400030; 2 College of Mechanical Engineering,Chongqing University,Chongqing 400030 );Present Research Status and Development Prospect of Abrasive Belt Grinding Technique[J];Materials Review;2006-02
8 LI Jian-ping(Chongqing Vocational and Technical Institute,Chongqing 400712,China);The Common Theories and Methods of "Green Design" for Products' Whole Life Cycle[J];Journal of Chongqing Vocational & Technical Institute;2006-03
9 HOU Ya-li1,LI Chang-he2,LU Bing-heng2 (1.Qingdao Technological University,Qingdao 266033,China;2.State Key Laboratory for Manufacturing Systems Engineering,Xi'an Jiaotong University,Xi'an,710049,China);Key Technology and Application of Super-high Speed Grinding Machining[J];Bearing;2009-03
10 WANG Shu-liang 1,FENG Zhen 2(1.Library Jiangsu Teachers University of Technology,Changzhou 213001,China;2.School of Electromechanical Engineering,Xidian Univ.,Xi′an 710071,China);Analysis of Green Process Data[J];Journal of Jiangsu Teachers University of Technology;2006-02
China Proceedings of conference Full-text Database 10 Hits
1 FU Zhi-hua1,2,HUANG Yun1,HUANG Zhi2,LIU Guo-hua1,2,ZHOU-Wen1,2(1 College of Mechanical Engineering,Chongqing University,Chongqing 400044,China;2 Chongqing Engineering Research Center for Material Surface Precision Machining and Whole Set Equipments,Chongqing 400021,China);Study on the Grinding Performance of 0Cr17Ni4Cu4Nb for Gas Turbine Blades Based on Abrasive Belt Grinding[A];[C];2008
2 Jiang zhigang, Zhang hua, Cao huajun, He yan, Li Congbo (College of Mechano-automation, Wuhan University of Science & Technology, 430081, China) (Institute of Manufacturing Engineering, Chongqing University, 400044, China);Green manufacturing and its Operation mode based on information technology[A];[C];2006
3 XU Chun-zhi ZHAO Guo-an (BOSUN TOOLS GROUP CO.,LTD,SHI JIA ZHUANG 050035);Grind-machining and Oil Grinding Fluids[A];[C];2007
4 ;ULTRASOUND-POLISHING ABRASIVE GRINDING CARBIDE BIT OF THE DESIGN[A];[C];2007
5 ;EXPERIMENTAL RESEARCH ON THE ULTRASONIC VIBRATION PRECISION ABRASIVE BELT GRINDING 1CR13 STAINLESS STEEL[A];[C];2007
6 ;Appraise index system and method for Green Enterprise[A];[C];2007
7 ;ULTRASOUND-POLISHING ABRASIVE GRINDING CARBIDE BIT OF THE DESIGN[A];[C];2007
8 ;EXPERIMENTAL RESEARCH ON THE ULTRASONIC VIBRATION PRECISION ABRASIVE BELT GRINDING 1CR13 STAINLESS STEEL[A];[C];2007
9 ;DEVELOPMENT OF ABRASIVE BELT GRINDING MACHINE FOR CHAMFERING ENGINE WRIST-PIN HOLES[A];[C];2007
10 WANG Zhi-ying, SHI Shan-chong (Hebei University of Econmics and Business, Shijiazhuang 050061, China);The Study on Management and Administration of Real Estate Based on Recycle Economy[A];[C];2006
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Feng Bao - fu, Cai Guang - qi, Pan Xianjun, Gai Quanwen;Coolant Supplying Methods in High - speed Grinding[J];Machine Tool & Hydraulics;2002-02
2 Li Changhe 1,2 Xiu Shichao 1 Cai Guangqi 1 (1.Northeastern University,Shenyang 110004,China) (2.Inner Mongolia university for Nationalities,Tongliao 028042,China);HIGH SPEED AND SUPER-HIGH SPEED GRINDING PROCESS AND ITS ACHIEVE TECHNOLOGY[J];Diamond & Abrasives Engineering;2004-04
3 Li Changhe~1 Cai Guangqi~2 Xiu Shichao~2 Pang zirui~2(1.Qingdao Technological University,Qingdao 266033,China)(2.Northeastern University,Shenyang 110004,China);Development and key technologies for high efficiency abrasive machining[J];Diamond & Abrasives Engineering;2006-05
4 XIU Shichao CAI Guangqi (School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004);EDGE GRINDING LAYER MODEL AND PARAMETERS IN QUICK-POINT GRINDING[J];Chinese Journal of Mechanical Engineering;2006-11
5 Pang Zirui Li Jianzhuang Cai Guangqi;Selection of Characteristics of CBN Wheels Based on Ultrahigh Speed Grinding[J];Machinery;2007-02
6 DING Jin-fu, YU Fu-jin, ZHANG Ke-hua (Zhejiang Normal University, Zhejiang Jinhua, 321019, China);The Application and Prospect of Dry-Cutting Technology in Modern Manufacture[J];Mie of China;2005-10
7 LI Chang-he1,MENG Guang-yao1,CAI Guang-qi2 (1.Provincial Key Laboratory for Machinery Design and Manufacture,Qingdao Technological University,Qingdao 266033,China;2.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China);New development and current state for high speed and super-high speed abrasive machining[J];Journal of Qingdao Technological University;2007-02
8 Wu Yannong,Ye Weichang;Development and application of monolayer superabrasive grinding wheel[J];Machinery Manufacturing Engineer;2001-09
9 CAI Guang qi, et al. (Northeastern University, Shenyang 110006, China);The new progress of abrasive grinding technology[J];World Manufacturing Engineering&Market;2003-01
10 Cai Guangqi Xiu Shichao (School of Mechanical Engineering & Automation,Northeastern University, Shenyang 110004,China);Key technology and equipment of super-high speed grinding[J];World Manufacturing Engineering & Market;2007-03
【Secondary References】
Chinese Journal Full-text Database 6 Hits
1 Sun Xiangdong(Henan University of Technology,Zhengzhou 450001,China);AHP and gray analysis of the green evaluation index system of grinding process[J];Diamond & Abrasives Engineering;2008-01
2 GU Li-duo,MENG Guang-yao,SHANG Shan-shan,LI Chang-he(Mechanical Engineering College,Qingdao Technological University,Qingdao 266033,China);Selections and Calculations of Fluid Supply Parameters in Near Dry Grinding for Green Manufacturing[J];Coal Mine Machinery;2008-12
3 LIU Yu-xun(He'nan University of Technology,Zhengzhou 450001,China);AHP and grey relational analysis of synthetical evaluation index system of grinding process[J];Machinery Design & Manufacture;2009-10
4 WANG Jinbao, WANG Jiyu, WANG Libo, LI Wenwei (School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, CHN);Study on Key Technology of Quick-point Grinding Wheels[J];Manufacturing Technology & Machine Tool;2008-07
5 XIU Shichao①,FENG Qiang②(①School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,CHN; ②Tianjin University,Tianjin 300072,CHN);Frame of Theory and Achieving Technology for Green Grinding Process[J];Manufacturing Technology & Machine Tool;2008-10
6 LIU Yueming,GONG Yadong,QIU Jian(School of Mechanical Engineering & Automatic,Northeast University,Shenyang 110004,CHN);The Residual Stress Affected by Machining Velocity in Super-high Point-grinding[J];Manufacturing Technology & Machine Tool;2009-07
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 LIU Fei, ZHANG Hua, CHEN Xiao-hui (Institute of Manufacturing Engineering, Chongqing University, Chongqing 400044,China);INTEGRATION CHARACTERISTICS OF GREEN MANUFACTURING AND GREEN INTEGRATED MANUFACTURING SYSTEMS[J];COMPUTER INTEGRATED MANUFACTURING SYSTEMS;1999-04
2 Liu Fei Zhang Hua Chen Xiaohui (Chongqing University);A DECISION MAKING FRAMEWORK MODEL OF GREEN MANUFACTURING[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1999-05
3 Chen Zhuang(Chongqing Institute of Technology Management, Chongqing, China ) Liu Fei ; Chen Xiaohui;Product Multi-life-Cycle Engineering Based on Green Manufacturing[J];CHINA MECHANICAL ENGINEERING;1999-02
4 LIU Fei(Chongqing University,Chongqing,China) CAO Huajun HE Nailjun p 105 110;On State-of-the-Art of Green Manufacturing[J];CHINA MECHANICAL ENGINEERING;2000-Z1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved