Full-Text Search：
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Netshape Forming Engineering》 2013-03
Add to Favorite Get Latest Update

Simulation Research of Ball Spinning of Tubular Parts with Inner Rib

DONG Fei;LI Cheng-ming;LI Ping;QIAN Chen-hao;School of Materials Science and Engineering,Hefei University of Technology;  
The ball spinning of tubular parts with longitudinal inner rib was numerically simulated bv the finite clement software ABAQUS.The state of stress in the deformation zone and the law of plastic flow of the metal in the deformation were studied.The influences of thickness reduction rate,leed rate and the workpiece thickness on forming quality were analyzed.Finally,the device and mould were designed and manufactured according to the results of numerical simulation.The spinning sample with proper inner rib was successfully made.
【Fund】： 安徽省优秀青年科技基金(10040606Y21)
【CateGory Index】： TG306
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 JIANG Shu-yong~1,XUE Ke-min~2,LI Chun-feng~1,LU Yan~1 (1.School of Material Science and Engineering,Harbin Institute of Technology, Harbin Heilongjiang 150001,China; 2.School of Material Scrience and Engineering,Hefei University of Technology, Hefei Anhui 230000,China;);Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy[J];Forging & Stamping Technology;2005-04
2 ZHAO Yun-hao WANG Fa-chun SHEN Jian (General Research Institute for Nonferrous Metals,Beijing 100088,China);Investigation on microstructure and mechanical properties of TB2 titanium alloy after tube-spinning deformation[J];Forging & Stamping Technology;2007-06
3 XU Wen-chen,SHAN De-bin,CHEN Yu,KANG Da-chang,LV Yan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Study on hot spinning technology of tubular workpieces for TA15 titanium alloy[J];Forging & Stamping Technology;2008-03
4 JIANG Shu-yong1,SUN Jin-feng2,ZHAO Li-hong1,LI Chun-feng3(1.Engineering Training Center,Harbin Engineering University,Harbin 150001,China;2.College of Material Science and Chemical Engineering,Harbin Engineering University,Harbin 150001,China;3.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Finite element analysis of backward ball spinning of thin-walled tube with longitudinal inner ribs[J];Forging & Stamping Technology;2009-04
5 XU Chun-Ting~1,XUE Ke-Min~2,LI Ping~2 (1.The 38th Research Institute of CETC,Hefei 230031,China;2.School of Material Science & Engineering,Hefei University of Technology,Hefei 230009,China);Process Simulation and Deflection Analysis of Tube with Longitudinal Inner Rib in Ball Backward Spinning[J];Journal of Henan University of Science & Technology(Natural Science);2006-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHU Yanchun,ZENG Weidong,FENG Fei,SUN Yu,ZHOU Yigang(State Key Laboratory of Solidification Processing,School of Materials Science and Engineering,Northwestern Polytechnical University,Xi'an 710072);Technology of Numerical Simulation and Its Application in Defect Prediction of Plastic Forming Process[J];Materials Review;2010-23
2 JIANG Shu-yong1,SUN Jin-feng2,ZHAO Li-hong1,ZHANG Yan-qiu1(1.Engineering Training Center,Harbin Engineering University,Harbin 150001,China; 2.College of Materials Science and Chemical Engineering,Harbin 150001,China);Study on influence of ball diameter on backward ball spinning of thin-walled tube[J];Materials Science and Technology;2011-02
3 JIANG Shu-yong1,GU Wei-dong2,LI Chun-feng3,ZHANG Jun1(1.Engineering Training Center,Harbin Engineering University,Harbin 150001,China;2.Harbin Aircraft Industry Group,Harbin 150001,China;3.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Study of deformation mechanism of backward ball spinning of thin-walled tube with longitudinal inner ribs[J];Forging & Stamping Technology;2008-05
4 XIA Qin-xiang,LI Xiao-man,LI Xiao-long,ZHOU Chi,ZHANG Shi-jun(School of Mechanical Engineering,South China University of Technology,Guangzhou 510640,China);Experimental research and numerical simulation on cup-shaped thin-walled trapezoidal inner gear formed by spinning[J];Forging & Stamping Technology;2008-06
5 ZHU Xiao-qing(International Engineering Limited Company of No.10 Institute of China Agriculture Machinery Administration,Luoyang 471039,China);Study on drawing process of spiral-shaped titanium alloy product[J];Forging & Stamping Technology;2009-03
6 JIANG Shu-yong1,SUN Jin-feng2,ZHAO Li-hong1,LI Chun-feng3(1.Engineering Training Center,Harbin Engineering University,Harbin 150001,China;2.College of Material Science and Chemical Engineering,Harbin Engineering University,Harbin 150001,China;3.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Finite element analysis of backward ball spinning of thin-walled tube with longitudinal inner ribs[J];Forging & Stamping Technology;2009-04
7 CHENG Ben,YE Wen-jun,HUI Song-xiao(State Key Laboratory for Fabrication and Processing of Non-ferrous Metals,General Research Institute for Non-ferrous Metals,Beijing 100088,China);FEM simulation of backward extrusion process of TB10 titanium alloy cylinder[J];Forging & Stamping Technology;2009-05
8 SUN Ling-yan,YE Bang-yan,XIA Qin-xiang(School of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou 510640,China);Influence of preformed blank on spin-forming of cup-shaped thin-walled trapezoidal inner gear[J];Forging & Stamping Technology;2010-01
9 ZHANG Yan-qiu1,JIANG Shu-yong1,SUN Jin-feng2,ZHAO Li-hong1(1.Engineering Training Center,Harbin Engineering University,Harbin 150001,China;2.College of Materials Science and Chemical Engineering,Harbin Engineering University,Harbin 150001,China);Study on forming mechanism of thin-walled tube in multi-pass ball spinning[J];Forging & Stamping Technology;2010-02
10 HU Zhi-qing1,2,LI Ming-zhe1(1.Institute of Mechanical Science and Engineering,Jilin University,Changchun 130022,China;2.Roll Forging Research Institute,Jilin University,Changchun 130022,China);Experimental study of forming concave disk parts by novel spinning process[J];Forging & Stamping Technology;2010-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 KANG Da-chang,LI Mao-sheng,CHEN Yu(School of Material Science and Engi neering,Harbin Institute of Technology,Harbin150001,China);A study of force and power in ball spinning[J];Material Science and Technology;2002-02
2 XUE Ke-min, JIANG Shu-yong, KANG Da-chang (School of Materials Science and Engineering , Harbin Institute of Technology Harbin, 15001 China);Power spinning deformation of thin-walled cylinders with longitudinal inner ribs[J];Material Science and Technology;2002-03
3 JIANG Shu-yong~1,XUE Ke-min~2,LI Chun-feng~1,LU Yan~1 (1.School of Material Science and Engineering,Harbin Institute of Technology, Harbin Heilongjiang 150001,China; 2.School of Material Scrience and Engineering,Hefei University of Technology, Hefei Anhui 230000,China;);Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy[J];Forging & Stamping Technology;2005-04
4 JIANG Shu-yong~(1),XUE Ke-min~(2),LI Chun-feng~(3),ZHANG Jun~(1)(1.Center for Engineering Training,Harbin Engineering University,Harbin Heilongjiang 150001,China;2.School of Materials Science and Engineering,Hefei University of Technology,Hefei Anhui 230009,China;3.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin Heilongjiang 150001,China);Diagnosis of defects in ball spinning deformation of thin-walled tubular part based on ANN[J];Forging & Stamping Technology;2006-03
5 LV Cheng~(1,2),ZHANG Li-wen~(1,2),MU Zheng-jun~2,PEI Ji-bin~(1,2)(1.The State Key Laboratory for Materials Modification by Laser,Ion and Electron Beams,Dalian University of Technology,Dalian Liaoning 116024,China;2.School of Materials Science and Engineering,Dalian University of Technology,Dalian Liaoning 116024,China);3D coupled thermo-mechanical FEM simulation of forging process of TC4 alloy workpiece[J];Forging & Stamping Technology;2007-01
6 LI Zeng-hui1,ZHAO Sheng-dun1,HAN Dong2,ZHANG Li-wu2,ZHANG Guan-hua2,HUA Xiao-yu2(1.Xi′an Jiaotung University,Xi'an 710049,China;2.Xi'an Aerospace Power Machine Factory,Xi'an 710049,China);Brief analysis of several common failure modes of roller[J];Forging & Stamping Technology;2007-02
7 ZHAO Yun-hao WANG Fa-chun SHEN Jian (General Research Institute for Nonferrous Metals,Beijing 100088,China);Investigation on microstructure and mechanical properties of TB2 titanium alloy after tube-spinning deformation[J];Forging & Stamping Technology;2007-06
8 ZHAO Teng-lun,HUANG Jian-feng,ZHANG Qing-quan,YAO Jin(School of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China);FEM numerical simulation of tube backword spinning[J];Forging & Stamping Technology;2008-01
9 XU Wen-chen,SHAN De-bin,CHEN Yu,KANG Da-chang,LV Yan (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Study on hot spinning technology of tubular workpieces for TA15 titanium alloy[J];Forging & Stamping Technology;2008-03
10 JIANG Shu-yong1,GU Wei-dong2,LI Chun-feng3,ZHANG Jun1(1.Engineering Training Center,Harbin Engineering University,Harbin 150001,China;2.Harbin Aircraft Industry Group,Harbin 150001,China;3.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China);Study of deformation mechanism of backward ball spinning of thin-walled tube with longitudinal inner ribs[J];Forging & Stamping Technology;2008-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved