Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Computer Aided Engineering》 2009-04
Add to Favorite Get Latest Update

Optimization on offset printing press structure

HU Nianwu,CHEN Nan,LI Wenwei,YANG Dong(School of Mechanical Eng.,Southeast Univ.,Nanjing 211189,China)  
To improve the printing quality of offset printing press when it is working at high speed,a dynamics model is built for a kind of offset printing press,and the vibration mode and dynamic characteristics are recognized and analyzed accurately by simulation.It shows that the unreasonable structure of the wallboard is the main reason that results in bigger vibration of whole machine under the effect of exciting force;taken the weight values of the first four natural frequency as the standards to evaluate the dynamic performance of the frame,the effect of the strengthened bar parameters of wallboard on the dynamic performance is analyzed by sensitivity analysis method,and the structure design is optimized.The optimization result shows that one order natural frequency of the frame is increased by 18.1%.The method can improve the dynamic performance and enhance the competition for the offset printing press.
【Fund】: 江苏省科技成果转化专项资金(BT2007072)
【CateGory Index】: TS827
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 YANG Jia-hua, GUAN Hua, GUO Ning-jun (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China;College of Mechanical Engineering, Beijing University of Science and Technology, Beijing 100083, China;Beiren Printing Machinery Holdings Limited Co., Beijing 100022, China);The Finite Element Analysis About the Vibration of Printing Presses[J];Journal of Beijing University of Technology;2006-06
2 WU Hao,WANG Jian-wen,An Qi(School of Mechanical and Power Engineering,East China Unversity of Science and Technology,Shanghai 200237,China);Calculation on Axial Stiffness of Supporting Bearings of Vertical Overhung Rotors with EHL[J];Journal of East China University of Science and Technology(Natural Science Edition);2008-03
3 Wu Hao Wang Jianwen An Qi(School of Mechanical and Power Engineering,East China University of Science and Technology,Shanghai 200237,China);Study on the Calculating Method of Radial Stiffness of Tapered Roller Bearing[J];Lubrication Engineering;2008-07
4 HU Rufu(Southeast University, Nanjing, China)SUN Qinghong CHEN Nan CHEN Xin;Research on Structure Dynamic Optimization Design of High Precision of Internal Grinder[J];China Mechanical Engineering;2002-18
5 Zhang Jianrun~1 Lu Xi~1 Sun Qinghong~1Peng Wen~2Yao Shujian~2 1.Southeast University,Nanjing,2100962.Jiangsu Duoling NC Mechanical Tool Ltd.,Changzhou,213012;Dynamic Optimization Design of 5 Axis Numerical Control Gantry Machining Center[J];China Mechanical Engineering;2005-21
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Yao-man1,LIU Chun-shi2,XIE Zhi-kun1,LIU Yong-xian1 (1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China;2.Shenyang Machine Tool(Group) Co.Ltd.,Shenyang 110041,China.);Dynamic Performances Analysis of NC Machine Tool Considering Linear Rolling Guideway[J];Journal of Northeastern University(Natural Science);2007-11
2 Yang Mingqing1,2 Sun Qinghong1 Zhang Jianrun1 Zhang Wei1 Liang Jinjuan1(1School of Mechanical Engineering,Southeast University,Nanjing 211189,China)(2School of Mechanical Engineering,Guizhou University,Guizhou 550003,China);Dynamics modeling and optimization of combing machine gearbox structure[J];Journal of Southeast University(Natural Science Edition);2008-04
3 GU Wei-bin,YAO Zhen-qiang,HU Jun (School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200030,China);Dynamic analysis of micro-feed mechanism in high-speed roller grinding machine[J];Journal of Engineering Design;2007-06
4 ZHANG Yu1,XIA Xiao-ping2(1.Changzhou Institute of Technology,Changzhou Jiangsu 213003,China;2.Changzhou Institute of Engineering Technology,Changzhou Jiangsu 213003,China);Design of the Tool Changer in the Bamboo Hat ATC for Machine Centre[J];Equipment Manufacturing Technology;2009-06
5 YUAN Songmei,LIN Jijie,LIU Qiang(School of Mechanical Engineering & Automation,Beihang University,Beijing 100083,China);Finite Element Analysis of Machine Tool as a Whole[J];Machine Tool & Hydraulics;2008-04
6 LIU Hanxin,ZHU Zhuangrui,LU Xi,ZHANG Jianrun(College of Mechanical Engineering,Southeast University,Nanjing 211189,China);Modal Test and Optimization of XH7650 Machining Center[J];Machine Tool & Hydraulics;2008-04
7 ZHANG Yu1, XIA Xiao-ping2(1.School of Mechatronic Engineering , Changzhou Institute of Technolog, Changzhou 213002, China;2.School of Mechanical Engineering, Institute of Engineering Technology, Changzhou 213000, China);Analysis of Tool Capacity and Dividing Device's Action in the Bamboo Hat ATC[J];Mechanical Engineer;2009-01
8 YU Yang1,ZHANG Jian-run1,LU Xi1,SUN Qing-hong1,PENG Wen2,YAO Shu-jian2(1.Southeast University,Nanjing 210096,China;2.Jiangsu Duoling Nc Mechanical Tool Ltd,Changzhou 213012,China);Optimization design of the spindle system of 5-axis machining center[J];Manufacturing Automation;2006-08
9 Li Wujing,Yang Wei,Li Yanxiao,Han Guosheng(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044);On the Intrinsic Property of a Transmission House Considering Assembly Relationship[J];Mechanical Science and Technology for Aerospace Engineering;2008-03
10 XIE Li-ming1,2,LI Da-ming2,SHEN Hao2,JIN Lan2(1.Key Laboratory of Digital Manufacturing Technology and Application,The Ministry of Education,Lanzhou University of Technology,Lanzhou 730050,China;2.School of Mechanical and Electronical Engineering,Lanzhou University of Technology,Lanzhou 730050,China);Structure Analysis of Scene Milling Machine Based on CosmosWorks[J];Machinery & Electronics;2008-09
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 YANG Jia-hua, GUAN Hua (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China; Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China );Test and Analysis of the Vibration of Printing Press[J];Journal of Beijing Polytechnic University;2004-01
3 MA Guo-hua1,HU Gui-lan2  (1.School of Mechanical Engneering,Ningxia University,Yinchuan 750021,China; 2.Xibei Bearing Limited Company,Yinchuan 750021,China);Numerical Calculation on Elastic Contact of Rolling Bearings[J];Bearing;2005-01
4 CHEN Xin et al;The study of dynamic design method for mechanical structure based on the virtual environment[J];Manofacturing Automation;2000-12
5 ;Finite Element Modeling and Analysis of Gantry-type 5-axis Machining Center Structure[J];Grinder and Grinding;2005-01
6 Meng Guang (The State Key Lab of Vibration, Shock and Noise, Shanghai Jiao Tong University Shanghai, 200030);Retrospect and Prospect to the Research on Rotordynamics[J];Journal of Vibration Engineering;2002-01
7 WANG Yu xin(Tianjin University,Tianjin,China) TAI Xiaomei JIANG Shan;Mechanical Product Conceptual Design Under Three Dimensional Viatual Design Circumstance[J];China Mechanical Engineering;2001-03
8 CHEN Xin(Electric Power Construction Research Institute,Beijing,China) CHEN Nan SUN Qinghong;The Research of Vibration Control Based on the System of Mechanical Structure and MTMD[J];China Mechanical Engineering;2002-09
9 HU Rufu(Southeast University, Nanjing, China)SUN Qinghong CHEN Nan CHEN Xin;Research on Structure Dynamic Optimization Design of High Precision of Internal Grinder[J];China Mechanical Engineering;2002-18
10 MAO Haijun(Southeast University), et al;Influence of Arrangement Patterns of Strengthened Bars on Dyna-mics of Machine Tool[J];Manufacturing Technology & Machine Tool;2001-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved