Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Computer Integrated Manufacturing Systems》 2005-10
Add to Favorite Get Latest Update

Automatic approach to determine location plan set of workpiece for holes-system modular fixture system

WU Yu-guang(Sch.of Mechanical & Electrical Eng.,Hehai Univ.,Changzhou 213022,China)  
A general location mode for holes-system modular fixture was proposed.The location mode included all the configurations of contact edges among the located elements and the workpiece silhouette in the located plane.Each plan consisted of three locators rigidly attached to the lattice of holes on the base plate,and the locators were composed of circular locating pin and half-V and various combinations of these two locators.An implementation algorithm to construct the set of all feasible location plans was presented.The algorithm determined the position of locators in two steps;all possible located position sets of two locators were determined firstly according to the type and the position of the two given located edges of workpiece,then the third locator and all feasible located position set were defined after the workpiece were constrained partially by first two locators.The approach could be used to establish the whole available location plan sets for given workpiece and holes-system modular fixture configuration.
【CateGory Index】: TP391.7;
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 3 Hits
1 CAI Jin,DUAN Guo-lin,YAO Tao,XU Hong-jing(Research Institute of CAD/CAM,School of Mechanical Enginering,Hebei University of Technology,Tianjin 300130,China);Summary on the review and development trend of computer aided fixture designing technology[J];Journal of Machine Design;2010-02
2 HU Qing-xi,XU Yan-zhi(Rapid Manufacturing Engineering Center,Shanghai University,Shanghai 200444,China);Analysis and Research of the Performance of the Key Component of Rapid Fixture[J];Machinery & Electronics;2009-01
3 YANG Dan1,XIONG Jian-min1,ZHENG Xin-jian1,TAN Bao-hua2(1.School of Mechanical Engineering,Hubei University of Technology,Wuhan 430068,China;2.School of Science,Hubei University of Technology,Wuhan 430068,China);Application of Virtual Clamping in Three Coordinate Measurement of Car Component[J];Mechanical Engineering & Automation;2009-05
Chinese Journal Full-text Database 3 Hits
1 Xu Zhigang; Huang Kezheng; Aai Xing; Liu Yuqi (Shandong University );RESEARCH ON THE SYSTEM OF MODULAR FIXTURE DESIGN AUTOMATION[J];Chinese Journal of Mechanical Engineering;2000-12
2 Wu Yuguang, Gao Shuming, Chen Zichen (Zhejiang University);GEOMETRIC THEORY ON AUTOMATED MODULAR FIXTURE PLANNING[J];Chinese Journal of Mechanical Engineering;2002-01
3 WU Yuguang (Hehai University);An Automatic Way for Identifying the Positioning Scheme for Modular Fixture[J];Manufacturing Technology & Machine Tool;2002-08
Chinese Journal Full-text Database 10 Hits
1 QIN Guohua1,2,ZHANG Weihong2,LI Yulong3 (1.School of Aeronautical and Mechanical Engineering,Nanchang Hangkong University,Nanchang 330063,China;2.School of Mechatronics,Northwestern Polytechnical University,Xi′an 710072,China;3.School of Aeronautics,Northwestern Polytechnical University,Xi′an 710072,China);A New Algorithm of Fixture Locating Scheme Design[J];Journal of Test and Measurement Technology;2008-03
2 MENG Junhuan(Department of Electromachenic,Dezhou University,Dezhou Shandong 253023,China);Verify Fix and Pinch Stability in Combination Fixture Base on CAD System[J];Journal of Dezhou University;2005-06
3 WANG Su-qin,QIAN Jin-hong(Siemens VDO Automotive Wuhu Co., Ltd,AnhuiWuhu 241009, China);A Study on the Status and Applications of Modular Fixture[J];Electro-mechanical Engineering;2004-05
4 CAO Shu-kun1 HUANG Ke-zheng2 (1.School of Mechanical Engineering, Jinan University, Jinan 250022, China; 2.School of Mechanical Engineering, Shandong University, Jinan 250061, China);Object-Oriented Product Structure Evolution System[J];Journal of Engineering Graphics;2003-03
5 Ou Yanjiang Gu Ming Xu Xiaoyang Mechanical Engineering Department of Chengdu Electromechanical College,Chengdu,Sichuan,610031;System of Modular Fixture Auto-Assembly Based on Reconfigurable Core Components[J];Tool Engineering;2008-11
6 JIA Wen(Liuzhou Vocational Technical Institute,Liuzhou Guangxi 545006,China);The Application of Triangle Formula Positioning Error on the Hole Modular Fixture Design[J];Equipment Manufacturing Technology;2010-11
7 CHEN Guang-feng, LIU Wen-jian, JIN Tian-guo (School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin 150001,China);Focating feature recognition and locating design automation[J];Journal of Harbin Institute of Technology;2005-02
8 WU Zhuxi,XIAO Jie,WU Tiejun,PENG Chengming(College of Aeronautic and Mechanical Engineering,Nanchang Hangkong University,Nanchang 330063,China);Analysis Model of Constraint of Degrees of Freedom of a Workpiece Based on Fixture[J];Machine Tool & Hydraulics;2007-12
9 ;The Lettering Clamp Design Based on the Conceptual Design Automatization Platform - DARFAD[J];Mechatronics;2004-06
10 YU Hai-quan,PENG Gao-liang,LIU Wen-jian School of Mechanical Engineering,Harbin Institute of Technology,Harbin 150001,China;Research on module fixture assembly database in VR[J];Computer Engineering and Applications;2010-27
China Proceedings of conference Full-text Database 1 Hits
1 Pengzi Xu, Qiang Liu, Yong Hu, Qing Zou The department of mechanical manufacturing and automation The School of Mechanical Science and Engineering, Jilin University Changchun, China;The teaching reform for the modular fixture experimental course by comprehensive measures[A];[C];2013
Chinese Journal Full-text Database 10 Hits
1 Zhu Yin Meng Zhiyong Kan Shuyu (College of Civil Engineering and Architecture, Northern Jiaotong University,Beijing 100044);Determination of Weight Value by AHP[J];JOURNAL OF NORTHERN JIAOTONG UNIVERSITY;1999-05
2 QIU Xiao li,Yi Hong,WU Xi ying,TANG Wen cheng (Southeast University, Nanjing 210096,China);The STEP and XML Technology in the Information Sharing between Network Designing and Manufacturing[J];Group Technology & Production Modernization;2001-03
3 LIU Yong-xi,QIAO Li-hong(School of Mechanical Engineering and Automation,Beihang University,Beijing 100083,China);Study of Fixture Rapid Configuration Based on Group Technology[J];Group Technology & Production Modernization;2007-01
4 JIANG Yan ping, FAN Zhi ping (School of Business Administration, Northeastern University, Shenyang 110004, China);Theoretic Analysis of the Aggregated Approach to Group Decision Making with Multiple Fuzzy Judgement Matrices[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2001-03
5 ZHOU Bing-hai ~ 1,2 , WU Bin ~1,TAO Li-yan~21 School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 2000302 National Key Lab. of Flexible Manufacturing System Technology, Changchun 130012;XML-based Framework of Parametric Design for Typical Parts[J];东华大学学报(英文版);2006-02
6 Luo Yishu , Qin Pengfei (Department of Mechanical Engineering, China Textile University, Shanghai, 200051)He Yuanjun , Zhang Shensheng (Department of Computer Science, Shanghai Jiaotong University, Shanghai, 200030);Implementation Methods of DXF Data Exchange Interface[J];;1999-05
7 QU Chang,WANG Jun-ze(School of Mechanical Engineering,Nantong University,Nantong Jiangsu 226007,China);Developing approach for VBA in the 3D parametrical element database of modular fixture[J];Forging & Stamping Technology;2007-01
8 SHI Wei-ren,FENG Chao-gang,ZHANG Xin (College of Automation , Chongqing University , Chongqing 400044, China);The Middleware-based Enterprise Application Integration[J];Journal of Chongqing University(Natural Science Edition);2003-12
9 ZHANG Liang-feng~1, YANG Jing~1, PENG Hao-ge~2 (1. College of Mechanic and Automobile, Hunan University, Changsha 410082,China; 2.Dept.of Mech.and Elect.Eng., Hunan Institute of Engineering, Xiangtan 411101,China);Technological Realization of Data Exchange Between CAD Systematic Softwares[J];Journal of Hunan Institute of Engineering;2004-04
10 XU Zhi gang(CAD Research Center, Shandong University of Technology,Jinan,250061);Modular Fixture Design Automation Based on Theory of Generalized Mapping[J];ENGINEERING DESIGN;2000-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Guozheng1,2 YANG Haihui1 LIU Shun1(1.Anhui Technical College of Mechanical and Electrical Engineering,Wuhu 241000;2.CIMS institute,Hefei University of Technology,Hefei 230009);Research on Machining Center Fixture Design Based on Integrated Processing Procedure Requirements[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2012-03
2 WU Lei,SU Kai-hua,CHENG Guo-fei (Zhongshan Torch Polytechnic,Zhongshan Guangdong 528436,China);The Present Situation & Development Trend of Computer Aided Fixture Designing Technology[J];Equipment Manufacturing Technology;2011-11
3 Li Hao;Xiang Mingzhu;Xiao Jiansheng;Security Technique Division,the First Research Institute of Ministry of Public Security;;Parametric Design and Implementation of X-ray Source Expansion Drum Based on Pro /E[J];Tool Engineering;2013-12
4 ;Application of Flexible Combine-Clamp in Digital Rapid Production for Aircraft Tube[J];Aeronautical Manufacturing Technology;2012-09
5 LIU Fengguo (College of Mechanical and Electrical Engineering,Xuzhou Normal University,Xuzhou Jiangsu 221116,China);Dynamic Clamp Design for Conical Thread Machining of Drill Bits in Milling Machine Based on Pro/E[J];Machine Tool & Hydraulics;2010-16
6 ZHANG Guozheng1,LIU Youyu2(1.Anhui Technical College of Mechanical & Electrical Engineering,Wuhu Anhui 241000,China; 2.Anhui Polytechnic University,Wuhu Anhui 241000,China);Design of Multi-stage Pneumatic Fixture Controlled by PLC[J];Machine Tool & Hydraulics;2012-10
7 CAI Jin,DUAN Guo-lin,YAO Tao,XU Hong-jing(Research Institute of CAD/CAM,School of Mechanical Enginering,Hebei University of Technology,Tianjin 300130,China);Summary on the review and development trend of computer aided fixture designing technology[J];Journal of Machine Design;2010-02
8 JIAO Li-li,LIU De-fang(UGS College of Yancheng Institute of Technology,Yancheng;Research situation and development trend of CAD technology for modular machine tool[J];Journal of Machine Design;2012-02
9 Zhang Xiaofen;Huai Ni;Bai Yu(①Xianyang Vocational Technical College,Xianyang 712000,China; ②School of Mechatronic Engineering,Xi′an Technological University,Xi′an 710032,China);Structural Design and Assemble of Aerodynamic Chuck Based on SolidWorks[J];Value Engineering;2012-04
10 JIN He-rong,LU Xiu-chun(Yanshan University,Qinhuangdao 066004,China);Mechanism Design and Parameters Calculation of Profiling Hoop Bending Machine for 5/12 Reinforcing Bars[J];Machinery Design & Manufacture;2012-12
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Xu Zhigang; Hunag Kezheng; Ai Xing; Li Jingshan; Huo Zhipu; Zhao Li (Shandong University of Technology );Assembly Model Supporting Conceptual Design[J];JOURNAL OF ENGINEERING GRAPHICS;1999-02
2 Zhu Yaoxiang (Beijing Institute of Machinery Industry)Rong Yiming; Zhu Jian; Bai Yong (Southern Illinois University at Carbondale, U. S. A)Luo Zhenbi (Qinghua University);STUDY ON COMPUTER-AIDED MODULAR FIXTURE DESIGN SYSTEM[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1994-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved