Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《JOURNAL OF JIANGSU UNIVERSITY OF SCIENCE AND TECHNOLOGY》 2001-01
Add to Favorite Get Latest Update

Measurement of Cutting Temperature for Multiple Layer Composite Cutting Tips

SONG Chang cai, LIU Su (School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang, Jiangsu 212013, China)  
The cutting heat produced during the cutting process can directly affect the wear and service life of cutting tips, and can also influence the accuracy and surface quality of work pieces. The measurement of cutting temperature is an important testing technique for researching cutting heat and cutting processes, and is also considered as an important method for studying cooling characteristics of cooling fluids. The research work deals with the measurement of cutting temperature produced under the condition of five different cooling fluids for five cutting tips (with more than four coating layers).
【Fund】: 青年教师基金项目!(10 0 0 93)
【CateGory Index】: TG71
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 Song Changcai;High-speed Cutting Performance of New-type TiAlN Coating Milling Cutter[J];Tool Engineering;2002-06
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Liu Xianli ,Yuan Zhejun (Harbin Institute of Technology,Harbin 150001) Chen Bo,Meng An ,Chen Liguo, Yan Fugang, Li Zhenjia (Harbin University of Science and Technology,Harbin 150080);The Measurement of Cutting Temperature by Equivalent Thermocouple Methods[J];ACTA METROLOGICA SINICA;1999-03
2 SONG Chang cai, FENG Ai xin (School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjinag,Jiangsu 212013,China);A Study on the Cutting Ability of Multiply Composites Tips[J];JOURNAL OF JIANGSU UNIVERSITY OF SCIENCE AND TECHNOLOGY;2000-03
3 SONG Chang cai, FENG Ai xin (School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjian, Jiangsu 212013,China);The Study on the Wear Failure Mechanism of Multiply Composites Coated Tips[J];JOURNAL OF JIANGSU UNIVERSITY OF SCIENCE AND TECHNOLOGY;2000-05
4 Liu Yourong Liu Jiajun Zhu Baoliang(Tribology Research Institute Tsinghua University Beijing 100084 China);Wear Performance and Mechanism of Si_3N_4 Composite Ceramic Cutting Tool[J];TRIBOLOGY;1997-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Wen,ZHANG Wen-quan,ZHANG De-yuan(School of Mechanical Engineering and Automation,Beihang University,Beijing 100191,China);Monitoring Methods and Relationship Between Piezoelectric Transducer Electrical Characteristics and Vibration Cutting Force[J];Acta Armamentarii;2011-02
2 Liu Zhanqiang Huang Cuanzhen Wan Yi et al;Summary of Cutting Temperature Measurement Methods[J];Tool Engineering;2002-03
3 Song Changcai;High-speed Cutting Performance of New-type TiAlN Coating Milling Cutter[J];Tool Engineering;2002-06
4 Bi Siqing Xiong Ji Long Xinyan;Study on Coated Cemented Carbide Tools Used to Machining Stainless Steel[J];Tool Engineering;2006-12
5 Quan Yanming Le Youshu;Measuring Cutting Temperature in Milling with Natural Thermocouple[J];Tool Engineering;2007-05
6 Zhang Yanping Wu Xiongbiao Lu Meiqiao Jinhua College of Profession and Technology,Jinhua,Zhejiang 321007,China;Study on Preparation Technology for ZrN Coating of YT15 Cemented Carbide and the Cutting Performance[J];Tool Engineering;2009-04
7 GUO Xu-hong, ZHU Sheng-ling, ZENG Ting-wei, LIU Kai-qiang (Soochow University, Suzhou 215021, China);Wear Performance and Characteristics of Ceramic Cutting Tools and PCBN Cutting Tools[J];Materials For Mechanical Engineering;2004-11
8 WU Xiong-biao1,CHEN Ying2,ZHANG Yan-ping1(1.Jinhua College of Profession and Technology,Jinhua 321017,China;2.Leshan Vocational and Technical College,Leshan 614000,China);Preparation and Cutting Performance of YT15 Cemented Carbide Tools with ZrN Coating[J];Materials for Mechanical Engineering;2009-08
9 Zhao Jin,Li Qihao,Yang Haidong,Zhang Chonggao,Zhu Zhenguo Hefei University of Technology,Hefei 230009,China;Research on Al_2O_3-Tic Ceramic Tool's Wear Mechanism in Boring Centrifugal Cast Iron Cylinder Liner[J];Tool Engineering;2011-05
10 Yuan Yuefeng,Chen Wuyi,Gao Liansheng School of Mechanical Engineering and Automation,Beijing University of Aeronauics and Astronautics,Beijing 100191,China;Tool Materials Rapid Selection Based on Initial Wear[J];中国航空学报(英文版);2010-03
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Chen Zhangyan(Department of Mechanical Engineering);New Method for Studying the Cutting Process[J];Journal of Beijing Polytechnic University;1989-02
2 XU Gui ying ,ZHOU Xiao shuang (Department of Chemistry, Liaoning Normal University, Dalian 116029,China) [;Blackening for Fastener[J];Surface Technology;2003-04
3 WANG Guo-hua(No.247 Party of Tianjin Bureau of North China Geological Exploration,Baodi 301800,China);Study on Black Phosphating liquid for Cast Iron Workpieces[J];Surface Technology;2006-05
4 CHEN Min1; MA Li2(1.Dept of Control Sci and Engin, Nanjing Normal University, Nanjing 210042,China;2.No 49th Research Institute,China Electronics Technology Group Corporation,Harbin 150001,China);Fitting way of sensor characteristic[J];Journal of Transducer Technology;2003-01
5 LU Jun,SUN Baoyuan,ZENG Qiyong(Inst of Mech Engin,Dalian University of Technology,Dalian 116024,China);A new type of method of dynamic testing temperature for semi-artificial thermocouple[J];Journal of Transducer Technology;2003-11
6 GUO Yu,HU Wei-li,YE Xiao-juan,MA Qin-di (Dept of Automation, Nanjing University of Science and Technology, Nanjing 210094, China);Dynamic modeling method of thin-film thermocouple[J];Journal of Transducer Technology;2004-01
7 Xue Hui;Li Fuguo;Huang Luquan(Northwestern Polytechnical University);A Portable Temperature Sensor of Thin--Film Themocouple[J];JOURNAL OF TRANSDUCER TECHNOLOGY;1996-01
8 LI Xing li, LI An zhong, Wan Jun(71);Review and Prospect on Phosphating of Metals[J];MATERIAIS PROTECTION;2000-01
9 JIANG Bin+1, XU Bin-shi+2, DONG Shi-yun+2, WANG Hong-mei+2(1. College of Material Science and Engineering of Chongqing University, Chongqing 400044; 2. Surface Engineering Institute of Chinese Mechanical Engineering Society, Beijing 100072, China);Nano-Power Composite Coatings[J];Materiais Protection;2002-06
10 ;Development and Applications of Thin Film Thermocouples[J];Materials Review;1995-05
【Secondary References】
Chinese Journal Full-text Database 8 Hits
1 Deng Minhe Hu Yingning Wang Chengyong et al;Study of Hardened Steel Milling with Micro-Ball-End-Milling Cutter[J];Tool Engineering;2004-10
2 Guo Youdan Jimei University,Xiamen,Fujian 361021,China;Wear Rule and Life-span Research of TiAlN Coated Tool in High Speed Milling Hardened Mould Steel[J];Tool Engineering;2009-08
3 YU Li-hua,XUE An-jun,DONG Song-tao,XU Jun-hua(Institute of Material Science and Engineering,Jiangsu University of Science and Technology,Key Laboratory of Advanced Welding Technology of Jiangsu Province,Zhenjiang 212003,China);Influence of Si content on microstructure and mechanical property of Ti-Al-Si-N films[J];Transactions of Materials and Heat Treatment;2010-07
4 GUO You-dan(Jimei University,Xiamen 361021,P.R.China);Research of Distortion Rule and Crumb Micro-character of Hardened Mould Steel in High Speed Milling[J];Science Technology and Engineering;2009-22
5 GUO You-dan(Jimei University Fujian,Xiamen 361021,Fujian,China);Abrasion of High Speed Milling Tool for Hardwood Products[J];China Wood Industry;2008-06
6 LIU Jing-ming,CAO Feng-guo(Beijing Institute of Electro-Machining,Beijing 100083,China);Extend the die life by coating TiAlN on the surface of die for IC lead frame[J];Die & Mould Industry;2008-05
7 ZHANG Hui CHEN Wuyi(School of Mechanical Engineering and Automation,Beihang University,Beijing 100191);Milling Tool Rapid Selection Based on Statistical Law of Initial Wear[J];Journal of Mechanical Engineering;2011-11
8 ZHANG Fei1,YAN Peng-xun1,CHEN Jiang-tao1,MIAO Bin-bin1,LI Guan-bin2,WANG Jun1 (1.The Institute for Plasma and Metal Materials,Lanzhou University,Lanzhou 730000,China; 2.National Key Laboratory of Surface Engineering,Lanzhou Institute of Physics, Lanzhou 730000,China);Recent Research and Applications of (Ti_(1-x)Al_x)N Thin Hard Coating[J];Journal of Synthetic Crystals;2007-03
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Liu Xianli et al;Theory and Calculating Method of Cutting Temperature Measurement by Natural Thermal Element with Temperature Compensation[J];TOOL ENGINEERING;1998-10
2 Liu Su; Liu Jun; Song Changcai;The Behaviour of Titanium Boride Dispersed Alumina Cutting Tools and Their Properties[J];JOURNAL OF JIANGSU UNIVERSITY OF SCIENCE AND TECHNOLOGY;1997-06
3 Zhuang Daming Liu Jiajun Zhu Baoliang (Tribology Research Institute Tsinghua University Beijing 100084 China);Effect of Stress State in Different TiN Films on Their Tribological Performances[J];TRIBOLOGY;1996-04
4 Liu Yourong Liu Jiajun Zhu Baoliang(Tribology Research Institute Tsinghua University Beijing 100084 China);Wear Performance and Mechanism of Si_3N_4 Composite Ceramic Cutting Tool[J];TRIBOLOGY;1997-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved