Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Metallrugica Sinica》 2001-05
Add to Favorite Get Latest Update

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MECHANICALLY SYNTHESED NiAl/HfB_2 COMPOSITE

YANG Fubao1,2), GUO Jianting2), ZHOU Jiyang1) 1) Materials Department, Dalian University of Technology, Dalian 116024 2) Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016  
Mixed elematal powders of Ni, Al, Hf and B were ballmilled to reaction synthesize NiAl/HfB2 composite. The formation mechanism can be attributed to self propogating reaction induced by mechanical collision. The microstructure and compressive properties of densified bulk prepared by hot pressing and isostatically pressing have been investigated. The results show that the fine HfB2 reinforcing particles formed by in situ mode distributed mainly in matrix. The yield strength of NiAl/HfB2 composite is much stronger than that of NiAl, furthermore, it also possess good compressive ductility at low temperature. The yield strength of NiAl/HfB2 composite at high temperature is dependent on strain rate. The stress exponent n as well as activity energy Q calculated by standard power law are much higher than NiAl and similar to NiAl composite with a higher volume fraction of TiB2 dispersoids.
【Fund】: 国家863计划863-715-005-0030;; 国家自然科学基金39895152资助项目
【CateGory Index】: TB331
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 5 Hits
1 ZHANG Jianfei1,2,SHEN Jun1,REN Huiping2,SU Huiping1,FU Hengzhi1(1 State Key Laboratory of Solidification Processing,Northwesten Polytechnical University,Xi'an 710072;2 College of Material and Metallurgy,Inner Mongolia University of Science and Technology,Baotou 014010);Methods and Mechanisms of Strengthening-toughening of NiAl Based Composite[J];Materials Review;2009-11
2 TANG Wenming,TANG Hongjun,ZHENG Zhixiang, DING Houfu,LU Jun,LIU Junwu (Department of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Progresses in Studies on(Ti,Ni,Fe)-Al Nanocrystalline Intermetallics and Composites[J];Metallic Functional Materials;2003-06
3 JIANG Su-meng, QI Yi-hui(Materials & Chemical Engineering College, Liaoning Institute of Technology, Jinzhou 121001,China);Preparation Techniques of NiAl Intermetallics[J];Journal of Liaoning Institute of Technology;2004-05
4 GUO Jian-ting(Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China);Research progress of intermetallic NiAl alloys[J];Journal of Central South University(Science and Technology);2007-06
5 TANG Wenming, TANG Hongjun, ZHENG Zhixiang, DING Houfu, LU Jun, LIU Junwu (School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China);Progresses in studies on Fe-Al intermetallic matrix composites[J];The Chinese Journal of Nonferrous Metals;2003-04
China Proceedings of conference Full-text Database 1 Hits
1 REN Rong WU Yu-cheng TANG Wen-ming WANG Feng-tao ZHENG Zhi-xiang (School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Structural evolutions and grain growth kinetics of mechanically alloyed Fe_(35)Al_(35)Ti_(15)C_(15) powder induced by annealing[A];[C];2007
【Citations】
Chinese Journal Full-text Database 1 Hits
1 XIA Dongshen;GUO Jianting;LI Bo;LI Gusong(Institute of Metal Reserch, The Chinese Academy of Sciences, Shenyang 110015;Science College, Northeastern University, Shenyang 110006) Correspondent: GUO Jianting, professor, Tel: (024)23843531-55493, Fax: (024);INVESTIGATON ON MECHANICAL ALLOYING OF NiAI(Co)[J];ACTA METALLRUGICA SINICA;1999-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 SUN Yan LIU Ruiyan ZHANG Junshan ZHU Meili (Department of Meterial Engineering,Dalian University of Technology,Dalian 116024);Progress in NiAl-based Intermetallic Compound Research[J];Materials Review;2003-07
2 XIA Dong-sheng~1, LI Bo~2, GUO Jian-ting~3, LI Gu-song~3, YU Yan~1(1 Dalian Maritime University, Dalian 116026, China;2 The Northeast University, Shenyang 110006, China;3 Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China);In-situ TiC Particles Reinforced Nano-composite Synthesized by Mechanical Alloying NiAl(Co)-TiC Powders[J];Journal of Materials Engineering;2004-09
3 SUN Yan 1, LIU Rui-yan 1, ZHANG Jun-shan 1, GUO Jian-ting 2, ZHU Meili 1,WANG Xiu-min 1 (1.Department of Meterial Engineering, Dalian University of Technology, Dalian 116024,China; 2.institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016,China);Corrosion Behavior of NiAl-Based Multiphase Intermetallic Compounds in LiCl-Li_2O Molten Salt[J];Journal of Materials Science and Engineering;2003-06
4 CHAI Zhi gang, ZHAO Min shou (Chinese Academy of Science Changchun Institute of Applied Chemistry, Laboratory of Rare Earth Chemistry and Physics, Changchun, 130022);The Mechanical Alloying of Ni_(69.5)Al_(28)Y_(2.5) Powder[J];ACTA SCIENTIARIUM NATURALIUM UNIVERSITATIS JILINENSIS;2000-01
5 TANG Wenming,TANG Hongjun,ZHENG Zhixiang, DING Houfu,LU Jun,LIU Junwu (Department of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Progresses in Studies on(Ti,Ni,Fe)-Al Nanocrystalline Intermetallics and Composites[J];Metallic Functional Materials;2003-06
6 YANG Fubao GUO Jianting LI Gusong ZHOU Jiyang Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110015 Department of Materials Engineering, Dalian University of Technology, Dalian 116024 Correspondent: GUO Jianting, professor, T;INVESTIGATION ON MECHANICAL ALLOYING OF NiAl(Cr)[J];ACTA METALLRUGICA SINICA;2000-08
7 LIU Hui-lian~1 HUA Zhong~2 (College of Physics,Jilin Normal University,Siping 136000,China);The MA Mechanism Study of Ni—Al Intermetallics Compounds[J];Jilin Normal University Journal(Natural Science Edition);2007-01
8 Li Aimin Dong Weifang Sun Kangning (Key Lab. For Liquid Structure and Heredity of Materials of Education, Shandong University, Jinan Shandong 250061; Dept. of Environmental & Light Chemical, Shandong Institute of Light Industry, Jinan 250100);State-of-the Art of Intermetallics[J];Advanced Ceramics;2004-02
9 GUO Jian-ting(Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China);Research progress of intermetallic NiAl alloys[J];Journal of Central South University(Science and Technology);2007-06
10 CUI Jian-min1,LU Jing2,YUAN Yong1,CHEN Chun-hui2,LUO Feng-hua1,2(1.Laiwu Iron & Steel Group Powder Metallurgy Co.Ltd.,Laiwu 271105,China;2.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Influence of prealloyed powder on properties of powder metallurgy NiFe_(18.5)Al_(25) alloy[J];The Chinese Journal of Nonferrous Metals;2009-07
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Xing Zhiqiang(Dvision of Advanced Mechanics, Beijing Polytechnic University.100022);Corrosion Fatigue and Environmentat Activation Factor of 20Cr2Ni4 Steel[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1994-02
2 Xing Zhiqiang; Lu Yonghao (Division of Advanced Mechanics, Beijing Polytechnic Univetreity, 100022);Development of B_2-FeAl Intermetalics with High Performance[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1994-03
3 Lu Yonghao Xin Zhiqing(Division of Basic Science, Beijing Polytechnic University, 100022);A View on the Development of Intermetallic Compouned Fe_3Al[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1996-03
4 Wang Kaiyang; Wang Jinguo; Chen Guoliang(State key laboratory for advanced metallic materials, USTB, Beijing 100083, PRC);Synthesis of Nanocomposites of γ-TiAl+Ti_2 AlN by Mechanical Alloying[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1995-01
5 Sun Yangshan Yu Xinquan Xue Feng Mei Jianpmg Hunag Haipo Wang Shiqin(Department of Material Science and Engineering .Southeast University .Nanjing 21009G);Study of Fe3Al-Based Intermetallics[J];Materials Review;2000-08
6 Zhang Heng (Design and Application Lab For Composites,Zhengzhou University,Zhengzhou 450052) Zhang Li (Beijing Industrial and Commercial Unversity,Beijing 100037);Potential for Commercialization of Nanocomposites[J];Materials Review;2001-08
7 ZHANG Yiwen YANG Shizhong LI Li LI Shikui ZHANG Ying ZHANG Fengge GUO Weimin FENG Di (Central Iron & Steel Research Institute,Beijing 100081);Current Status of Research on PM Superalloy in China[J];Materials Review;2002-05
8 WANG Rong ming,TAO Chun hu,YAN Ming gao (Institute of Aeronautical Materials, Beijing 100095, China);Study on Microstructure of the TiB 2 Reinforced NiAlFe Metal Matrix Composites[J];JOURNAL OF MATERIALS ENGINEERING;1999-09
9 YANG Fu bao 1,2 ,GUO Jian ting 2,ZHOU Ji yang 1 (1 Materials Department, Dalian University of Technology, Dalian 116024,China; 2 Institute of Metal Research, The Chinese Academy of Sciences,Shenyang110016,China)[WT5HZ];Mechanically Synthesis and Mechanical Properties of Nanocrystalline NiAl Matrix Composite Reinforced by HfC Particles[J];Journal of Materials Engineering;2001-07
10 QI Yi hui 1, 2 ,GUO Jian ting 1,CUI Chuan yong 1,LI Gu song 1 (1 Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015,China; 2 Liaoning Institute of Technology, Jinzhou 121001,China)[WT5HZ];Influence of Hot Isostatic Pressing on Microstructure and Properties of NiAl-Cr(Zr) Intermetallic Alloy[J];Journal of Materials Engineering;2001-07
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 XU Wei-pu1,XU Bin-shi2,ZHANG Ya-yu1,GE Lei2(1.Shanghai Institute of Special Equipment Inspection and Technical Research,Shanghai 200062,China;2.National Key Laboratory for Remanufacturing,Beijing 100072,China);Tribological oxide mechanism of high velocity arc sprayed Fe-Al/Cr_3C_2 composite coating[J];Ordnance Material Science and Engineering;2006-01
2 WANG Fen,LI Meng(School of Material Science and Engineering,Shanxi University of Science & Technology,Xianyang of Shanxi Prov.712081,China);EFFECT OF EXTERNAL REACTANTS ON GROWTH OF Al_2O_3 FIBER AMONG Al_2O_(3(f))/Ti-Al COMPOSITES IN-SITU[J];Fiber Reinforced Plastics/Composites;2007-02
3 ZHANG Deming CHEN Guiqing HAN Jiecai MENG Songhe (Center for Composite Materials,Harbin Institute of Technology,Harbin 150001;The Recent Development on Gamma TiAl-based Alloys as Lightweight High-temperature Structural Materials[J];Materials Review;2005-08
4 WANG Bin,PENG Zhifang,ZHANG Fan,XIA Li(Department of Materials Engineering, College of Power and Mechanical Engineering, Wuhan University, Wuhan 430072);Research Progress in Preparing Iron Aluminide Intermetalics Materials by Powder Metallurgy[J];Materials Review;2007-01
5 GUO Xin,MA Qin,JI Genshun,LIU Longjiang(College of Materials Science and Engineering,Lanzhou University of Technology,Lanzhou 730050);The Research Evolution of Intermetallic Based Laminated Composites[J];Materials Review;2007-06
6 XU Run-sheng~(1,2),XU Bin-shi~1,XU Wei-pu~3(1.National Key Laboratory of Remanufacturing,Beijing 100072,China;2. Inner Mongolia Electric Power Research Institute,Huhehot 010020,China;3.Shanghai Jiaotong University,Shanghai 200030,China);Effects of Additive Compounds on Tribological Properties of High Velocity Arc Sprayed Iron Aluminum Coatings[J];Materials for Mechanical Engineering;2006-01
7 XU Wei-pu1,2,XU Bin-shi2,LUO Xiao-ming1 1.Shanghai Institute of Special Equipment Inspection and Technical Research,Shanghai 200062;2.National Key Laboratory for Remanufacturing,Beijing 100072;HIGH TEMPERATURE CORROSION OF HIGH VELOCITY ARC SPRAYED Fe-Al COMPOSITE COATINGS[J];Corrosion Science and Protection Technology;2008-03
8 CHEN Teng-fei1,YAN Jian-hui2,YANG Tai-long2,ZHANG Hou-an2(1.National Key Laboratory for Powder Metallurgy,Central South University, Changsha 410083,China;2.School of Electromechanics,Hunan University of Science and Technology,Xiangtan 411201,China);Synthesis of Pure NiAl Powder by Mechanical Alloying[J];Metal Materials and Metallurgy Engineering;2008-04
9 TANG Wen-ming, ZHENG Zhi-xiang, WU Yu-cheng, TANG Hong-jun, DONG Ji-ling(Department of Materials Science and Engineering, Hefei University of Technology, Anhui Hefei 230009, China);Structural Evolution of Fe_(75)Al_(25) Binary System during Mechanical Alloying[J];Transactions of Materids and Heat Treatment;2004-03
10 TANG Wen-ming,ZHENG Zhi-xiang,TANG Hong-jun,WU Yu-cheng,REN Rong,TANG Zhi-ming(Department of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Study on synthesis and grain growth kinetics of in-situ TiB_2/Fe_3Al nanocomposite(Ⅰ)——Mechanical alloying of Fe-Al-Ti-B quaternary powder[J];Transactions of Materials and Heat Treatment;2006-03
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 LI Gusong;DING Bingzhe;MIAO Weifang;YE Lilei;GUO Jianting(State Key La boratory of RSA,Institute of Metal Research,The Chinese Academy of Sciences,Shenyang)(Manuscript received 30 June,1993;in revised form 18 August,1993);PREPARATION OF Ni-Al INTERMETALLIC COMPOUNDS BY MECHANICAL ALLOYING[J];Acta Metallrugica Sinica;1994-14
2 LIU Zhenyun; LIN Dongliang; GU Yuefeng (Shanghai Jiaotong Univereity.Shanghai 200030), CAO Peng; LEI Changming; HUANG Boyun (Center South University of Technology, Changsha 410083);SUPERPLASTIC BEHAVIOUR OF NiAl AND Ni3Al DUPLEX ALLOY[J];ACTA METALLRUGICA SINICA;1996-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved