Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Acta Metallurgica Sinica》 2007-03
Add to Favorite Get Latest Update

THREE DIMENSIONAL HEAT TRANSFER OF COOLING COPPER PLATE OF THIN SLAB CONTINUOUS CASTING MOLD

YANG Gang~1 LI Baokuan~1 YU Yang~2 QI Fengsheng~1 1)School of Materials and Metallurgy,Northeastern University,Shenyang 110004 2)School of Mechanical Engineering,Tianjin University,Tianjin 300072  
A mathematical model has been developed for three-dimensional heat transfer to analyze the temperature field on the cooling copper plate of the thinslab continuous casting mold. Especially,the different boundary conditions are applied alternatively for the cooling slots and back plate of cold face of mold copper plate.The self-developed computer code in the visual Fortran language is used to solve the temperature field.Numerical results show that the temperature distribution on the hot face of copper plate is cloudy-shaped,and that on the cold face is icicle-shaped.The influences of operational parameters(casting speed,copper plate thickness and cooling water flow rate)on the copper plate temperature field are analyzed.Calculated values of temperature at typical positions agree well with the measured ones.These results are helpful to optimize the operational parameters and mold design.
【Fund】: 国家自然科学基金和宝钢集团联合基金50474085~~
【CateGory Index】: TF341.6
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 DING Yi1,2,ZHANG Hui1,TAO Hong-biao1,ZHANG Zong-ning2,CHEN Yuan-qing1,LIU Ai-qiang1(1.National Engineering and Research Center of Continuous Casting Technology,CISRI,Beijing 100081,China;2.Technology Center of Ma'anshan Iron and Steel Co.,Ltd.,Ma'anshan 243000,Anhui,China);Temperature Detection and Heat Transfer Analysis for Copperplate of CSP Process Funnel Shaped-Mould in Masteel[J];Iron & Steel;2009-12
2 SUI Da-shan,CUI Zhen-shan(National Die and Mould CAD Engineering Research Center,Shanghai Jiao Tong University,Shanghai 200030,China);Numerical simulation of 3D transient temperature field in aluminum alloy solidification process[J];The Chinese Journal of Nonferrous Metals;2008-07
【Citations】
Chinese Journal Full-text Database 2 Hits
1 ZHANG Xingzhong NA Xianzhao NI Mansen (Central Iron and Steel Research Institute);REVIEW OF KEY POINTS IN HIGH-EFFICIENT CONTINUOUS CASTING[J];IRON AND STEEL;2000-04
2 ZHANG Hui~1, TAO Hong-biao~1, LIU Ai-qiang~1, ZHANG Zhen-biao~2, WANG Jin-bu~2, ZHUANG Han-zhou~3 (1. National Engineering and Research Center for Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China; 2. Technical Center, Zhujiang Iron and Steel Group Co., Guangzhou 510730, China; 3. Technical Center, Guangzhou Iron and Steel Group Co., Guangzhou 510381, China);Distribution of Temperature and Heat Flux Density of Thin Slab Continuous Casting Mould Copper Plate[J];Iron and Steel;2005-07
【Co-citations】
Chinese Journal Full-text Database 4 Hits
1 ZHANG Hui~1,ZHAO Lian-gang~2,TAO Hong-biao~1, LIU Ai-qiang~1,LI Lie-jun~3 (1.National Engineering and Research Center for Continuous Casting Technology,Central Iron and Steel Research Institute,Beijing 100081,China;2.Department of Science and Technology,Anshan University of Science and Technology,Anshan 114044,Liaoning,China;3.Technical Center,Guangzhou Iron and Steel Group Co.,Guangzhou 510381,Guangdong,China);Numerical Simulation on Fluid Flow and Heat Transfer Behaviors in Mould of CSP Thin Slab Caster[J];Iron & Steel;2006-05
2 Cai Changqing (Fujian Sangming Iron & Steel (Group) Co. , Ltd. );Application of High Efficient Billet Continuous Casting Technology in Sangming Steel Plant[J];Steelmaking;2003-01
3 LAI Zhao-yi (The Steel-making Plant of Mingguang Co. , Ltd of Sanming Iron & Steel Group, Sanming 365000 China);Practice on Optimization of Steel-making Process and Improvement in Technical-economical Indicators[J];Steelmaking;2005-01
4 Chen Xiong1, Tan Yan2, Yu Xiaoguang2 (1 Department of Electronic Engineering, Fudan University, Shanghai 200433,China;2 Shanghai Baosteel. Corp., Shanghai 200433, China);Realization of 3D temperature field visual system for crystal mould[J];Chinese Journal of Scientific Instrument;2009-02
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Pan Xiulan Wang Yanhong Liang Huizhi (Angang Technology Center);Development of Electromagnetic Stirring Technology and Its Prospect at Home and Abroad[J];Angang Technology;2005-04
2 Lecture 17\ Factors Affecting Thermal Transfer in the Mould Zhang Fuqiang\ Wang Jiubin (AISC Technology Centre);Serial Lecture of the Rudimentary Knowledge on the Transmission Phenomenon in Solidification Process of Continuous Cast Slab and Billet[J];;1998-10
3 WANG Baofeng1,I.V.Samarasekera2 (1Institute of Metallurgical Engineering,UIST Baotou,Baotou 014010,China;2.University of British Columbia,V6TIN4,Canada);Heat flux calculation in high speed casting of stainless steel[J];JOURNAL OF BAOTOU UNIVERSITY OF IRON AND STEEL TECHNOLOGY;2000-01
4 GUO Jing jie, LIU Yuan, SU Yan qing, REN zhi jiang, JIA Jun (School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China);Optimum Design of Processing Parameters during ISM Process of Ti-5Al-2.5Sn[J];JOURNAL OF MATERIALS ENGINEERING;2000-01
5 WANG Xiao dong, LI Ting ju, JIN Jun ze (Dalian University of Technology,Dalian 116024,China) YU Yan, LIU Jun jiang, XU Hai cheng, CHEN Yi wen (Shanghai Bao Steel Group,Shanghai 201900, China)[WT5HZ];Effect of Electromagnetic Driver Force on Solidifying of Billet[J];Journal of Materials Engineering;2001-06
6 Su Yanqing; Ren Zhijiang; Cuo Jingjie; Jia Jun; Xu Huiyang; Cui Shigong (Harbin institute of Technology) (Harbin Electricmeter Factory) (Pingdingshan Mining Machinery Factory);Optimization of Parameters for ISM Process of Ti6A14V Alloy[J];MATERIAL SCIENCE AND TECHNOLOGY;1999-02
7 Jiang Bingyu(Nuclear power Institute of china, chengdu, 610005);The Development and Applications of Cold Crucible Induction Melting of Reactive Alloys[J];Rare Metal Materials and Engineering;1993-02
8 Chen Ruirun, Ding Hongsheng, Bi Weisheng, Guo Jingjie, Jia Jun, Fu Hengzhi (Harbin Institute of Technology, Harbin 150001, China);Electromagnetic Cold Crucible Technology and Its Application[J];Rare Metal Materials and Engineering;2005-04
9 ZHANG Jun;FU Hengzhi;XIE Faqin;SHEN Jun;LI Jianguo (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University);ELECTROMAGNETIC SHAPING AND SOLIDIFICATION OF METAL MELT[J];CHINESE JOURNAL OF MATERIAL RESEARCH;1997-06
10 DENG An yuan,HE Ji cheng (Key Laboratory for Electromagnetic Processing of Materials,Misistry of Education,Northeastern University,Shenyang 110004, China);Shape and Inhomogeneous Distortion Characteristics of Meniscus in Soft-Contact Electromagnetic Continuous Casting Mold[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2002-02
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Iron & Steel General Research Institute Zhang Xingzhong Ni Mansen Luo Tingliang Song Jinxiao Jing Chongyang Wang Zhisheng;Characteristic study of heat-transfer & solidification in mold for round billet CC[J];;1995-02
2 Wen Guanghua Li Gang Zhang Jian Chun (Cahongqing University) Liu Xiaomei Fang Yuan (Baoshan Iron and steel Group Corporation);DIGITAL SIMULATION OF THE TRI-DIMENTIONAL FLOW FIELD AND TEMPERATURE FIELD OF THIN SLAB CONTINUOUS CASTING MOLD[J];STEELMAKING;1997-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved