Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Machine Design & Research》 2006-01
Add to Favorite Get Latest Update

Reliability Analysis of Kinematic Accuracy for Elastic Slider-Crank Mechanism

TUO Yao-fei,CHEN Jian-jun,ZHANG Chi-jiang,CHEN Yong-qin(Department of Electronic and Mechanical Engineering,Xidian University,Xi'an 710071)  
This paper deals with the static and dynamic output kinematic accuracy of a group of elastic slider-crank mechanisms with the same design parameters by taking the bar length,joint-gaps,mass density,interception and physical parameters as random variables.According to the principle of linear pile-up of small displacement,the static and dynamic output kinematic errors are synthesized,and the reliability model of the kinematic accuracy of the mechanism is built.Through an example,a study of the influencing factors on the reliability of the output kinematic accuracy of the mechanism is made,the results obtained reveal the following fact: with the increase of crank's rotating speed,the dynamic elastic deformation of the mechanism becomes the principle factor that effects the reliability of the output kinematic accuracy of the mechanism greatly.
【Fund】: 武器装备预研基金资助项目(51421060505DZ0155);; 陕西省自然科学基金资助项目(2002A14)
【CateGory Index】: TH112
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 TONG Chang-hong1,2,HUANG Jian-long1,HU Yu-xia2(1.College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Institute of Mechanical Detection and Fault Diagnosis,Lanzhou City University,Lanzhou 730070,China);Reliability analysis of mechanism motion based on both wear of a kinematic pair and its original error[J];Journal of Lanzhou University of Technology;2010-02
2 TONG Chang-hong1,2,HUANG Jian-long1 (1.College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Institute of Mechanical Detection and Fault Diagnosis,Lanzhou City University,Lanzhou 730070,China);Model of output accuracy of motion in multi-mechanism system and its influencing factors[J];Journal of Lanzhou University of Technology;2010-04
【Citations】
Chinese Journal Full-text Database 5 Hits
1 CHEN Jian jun, CHEN Yong, CUI Ming Tao, GAO Wei, ZHAO Zhu qing (Department of Electronic and Mechanical Engineering,Xidian University, Xi′an 710071);Optimization Design for Flat Four-Bar Mechanism Based on Reliability of Kinematic Accuracy[J];Mechanical Science and Technology;2002-06
2 Shi Tianlu;Deng Hongzhou;Feng Yuansheng;Dinematic Precision and Reliability Analysis of RCCC Spacial Mechanism[J];MECHANICAL SCIENCE AND TECHNOLOGY;1995-01
3 MENG Xian-ju~1, ZHANG Ce~1,ZHAN Mei-jing~1,SHI Zhong-xiu~2 (1. School of Mechanical Engineering, Tianjin University, Tianjin 300072, China; 2. Qingdao University, Qingdao 266000,China);Analytical model of accuracy probability for linkages with clearances[J];Journal of Machine Design;2004-09
4 ZH ANG Li, H UANG Wen- zhen, ZH OU Zhi- ge School of Mechanical Eng.,the State Key Lab of Vibration,Shock &Noise, Shanghai Jiaotong Univ.,Shanghai2 0 0 0 30 ,China;Application of Sensitivity Analysis in Dynamic Response of Elastic Linkages[J];JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY;2000-03
5 Li Haiyan Zhang Xianmin Peng Huiqing 1.Shantou University, Shantou, 515063 2.South China University of Technology,Guangzhou,510640;Optimal Design of Compliant Mechanism Based on Fatigue Reliability[J];China Mechanical Engineering;2004-23
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIN Jing, YU Yue-qing ( College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022, China );New Method for the Kineto-Elastodynamic Balancing of Mechanical Linkage[J];Journal of Beijing Polytechnic University;2001-04
2 WANG Wen-jing YU Yue-qing WANG Hua-wei (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Frequency Characteristics Analysis of Compliant Mechanisms[J];Journal of Beijing University of Technology;2008-01
3 WU Liang-sheng~1 LIU Qing-long~1 ZHOU Da-shuai~(1,2) LUO Ji-cheng~1 1.College of Mechanical Engineering and Applied Electronics Technology,Beijing Univeristy of Technology,Beijing 100022,China; 2.Mechanical Engineering College,Jiamusi University,Jiamusi 154007,Heilongjiang,China;Structure Modified and Force Optimized Under the Dynamic Analysis of Tablet-machine[J];Journal of Beijing University of Technology;2008-03
4 DU Zhao-cai YU Yue-qing (College of Mechanical Engineering and Applied Electronics Technology,Beijing University of Technology,Beijiog 100022,China);Kinematic,Dynamic Constraint Conditions and System Equations of Flexible Parallel Robots[J];Journal of Beijing University of Technology;2008-03
5 TAN Xiaolan1),HAN Jianyou2), HE Guangping1)1) Electromechanical Engineering School,North China University of Technology,Beijing 100041,China 2) Mechanical Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Robust optimization design of angle displacement generation mechanism[J];Journal of University of Science and Technology Beijing;2007-10
6 YUAN Ying-cai1,2,LI Yang1,LI Guang1(1.Mechanical and Electronic Department,Beijing institute of Graphic Communication,Beijing 102600,China;2.Mechanical and Electronic Department,Central South University,Changsha 410083,China);Trace Sensitivity Analysis of the Web Print Fold Mechanism[J];Journal of Beijing Institute of Graphic Communication;2008-02
7 YUAN Ying-cai1,2,LI Yan1,LI Guang1(1.Department of Mechatronic Engineering,Beijing Institute of Graphic Communication,Beijing 102600,China;2.Mechanical and Electronic Department of Central South University,Changsha,410083,China);Multiple Objective Optimum Design of Web Offset Press's Knife Folding Mechanism[J];Journal of Beijing Institute of Graphic Communication;2008-04
8 DENG Jin-lian,LOU Yue-hai (Mechanical Engineering Department,Zhejiang Institute of Mechanical & Electronical Engineering,Hangzhou 310053,China);Research on a Dynamic Analysis System of Paper Delivery Mechanism Model[J];Group Technology & Production Modernization;2008-02
9 ZHANG Yi-min,HUANG Xian-zhen,ZHANG Xu-fang,YUE Gui-ping(School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004,China.);Pose Error Analysis of Planar Mechanism with Joint Clearance[J];Journal of Northeastern University(Natural Science);2008-08
10 Han Guoyou, Song Yujie, Han Daoquan, Du Xiuhua(College of Mechanical Science and Engineering, Daqing Petroleum Institute, Daqing 163318, P. R. China);Kinematical Revision of Winch Used in the Recovery Oil Engineering Well Based on Sensitivity Analysis[J];Journal of Northeast Forestry University;2007-12
China Proceedings of conference Full-text Database 5 Hits
1 Liu Hongzhao Wang Jianping Ci Fenzhi Wang Shoutian;Computer Simulation for an Oscillation Mechanism with 4-eccentric Axis for Continuous Casting Machine[A];[C];2000
2 Song Yimin Yu Yueqing Zhang Ce Ma Wengui;Self-Tuning Control of the Elastodynamic Response of Smart Mechanisms Using Neural Networks[A];[C];2000
3 XUE Yan-min LIU Hong-zhao (Department of Machine Desigh,Xi'an University of Technology,Xi'an 710048,China);Visualization in Kineto-Elasto Dynamics of Planar Linkage Based on Matlab[A];[C];2002
4 DU Zhao-cai YU Yue-qing YANG Jian-xin (College of Mechanical Engineering & Applied Electronics Technology,Beijing University of Technology,Beijing 100022,China);Analysis on Dynamic Stress of 3-■RR flexible parallel robots[A];[C];2006
5 Tuo Yao-fei~(1,2) Chen Jian-jun~1 Zhang Yao-qiang~1 (1.Department of Electronic and Mechanical Engineering,Xidian University,Xi'an 710071) (2.Department of Physics and Electrical Engineering,Yulin College,Yulin 719000,China);Optimization Design Based on Reliability for the Elastic Linkage Mechanism[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Li Yenong Shi Zukang (Nanjing University of Science & Technology, Nanjing, 210094);A STUDY ON THE MOTION RELIABILITY OF MECHANISMS[J];Acta Armamentarii;2003-01
2 ZHANG Chun lin, BAI Shi hong (School of Mechanical Engineering and Automation, Beijing Institute of Technology, Beijing100081);Design of the Conjugate Cam Tightening Weft[J];JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY;2000-01
3 SHEN Shaohua; ZHAN Xiaoling (Beijing Institute of Graphic Communication, Beijing 102600, China);The CAD of Conjugating Cams Mechanism[J];Packaging Engineering;2005-01
4 Pan Yuxue Song Youguei (Dep.of Mechanial Engineering of Changchun Inst.optics and Fine Mech.);The Dynamic Design of High Speed Cam Driven Parts System[J];JOURNAL OF CHANGCHUN INSTITUTE OF OPTICS AND FINE MECHANICS;1998-03
5 Liu Xingyuan(Gansu Grassland Ecological Research Institute,Lanzhou 730020);AN ANALYSIS OF APPLICATION EFFECT OF TYPE NH 565 RECTANGULAR PICKUP BALER[J];PRATACULTURAL SCIENCE;1995-06
6 SUN Zhi-li, CHEN Liang-yu, ZHANG Yu, DING Jin-yuan(School of Mechanical Engineering & Automation, Northeastern University, S henyang 110004, China. Correspondent: SUN Zhi-li, professor, E-mail: szlneu?@?hotmail.com);Reliability Model of Mechanical Transmission System(Ⅰ) Desig n Considering the Correlation of Stress[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2003-06
7 SUN Zhili, CHEN Liangyu, HE Enshan, DING Jinyuan(School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China. Correspondent: SUN Zhili, professor, Email: szlneu?@?hotmail.com);Reliability Model of Mechanical Transmission System (Ⅲ) Reliability Optimization Using Single Gear Reducer[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2003-09
8 LI Shu-jun~1,Clement GOSSELIN~2(1.School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110004 China;2.Department of Mechanical Engineering,Laval University,Quebec G1K 7P4,Canada.);Stiffness Analysis and Stiffness Mapping of 3-RRR Planar Parallel Mechanism Based on CCT Stiffness Matrix[J];Journal of Northe Astern University(Natural Science);2007-01
9 Yu Jianguo, Liu Zhijie, Zhao Honggang(Northeast Forestry University, Harbin 150040, P. R. China);The Dynamic Simulation of the Hay Baler's Compressing Mechanism[J];Journal of Northeast Forestry University;2004-02
10 Yu Jianguo Zhao Honggang (Northeast Forestry University,Harbin 150040,P.R.China);Setting Up of Kinematical Equation for Forage Transfer Mechanism of Hay Baler and Its Simulation[J];Journal of Northeast Forestry University;2006-03
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 TONG Chang-hong1,2,HUANG Jian-long1 (1.College of Mechano-Electronic Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Institute of Mechanical Detection and Fault Diagnosis,Lanzhou City University,Lanzhou 730070,China);Model of output accuracy of motion in multi-mechanism system and its influencing factors[J];Journal of Lanzhou University of Technology;2010-04
2 WANG Fang(School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710032,China);Dynamic Analysis of a New Forwarder Sucker Mechanism[J];Journal of Xi'an Technological University;2010-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Jianling;Li Zhe ;Bai Shixian( Department of Basic Science, Beijing Polytechnic University,100022);The Robust Design of the Linkages With Clearances Through Minimizing the Sensitivity to the Clearance Size[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1996-02
2 Yu Dejie;Liu Fuxiang(Vibration Measurement & Research Centre,Hunan Univ,410082,Changsha, P R China);Sensitivity Analysis for Steady State Dynamic Response of Elastic Linkages[J];JOURNAL OF HUNAN UNIVERSITY(NATURNAL SCIENCES);1996-05
3 Zhang Li Tan Bangben (Research Center of Vibration and Measurement,Hunan Univ,410082,Changsha,P R China);A Spline Function Collocation Method for Dynamic Response of High Speed Linkages[J];JOURNAL OF HUNAN UNIVERSITY(NATURNAL SCIENCE);1998-05
4 JIN Chun-mei,QIU Yang,ZHANG Ling,FANG Ling (Xi′an Jiaotong University, Xi′an 710049);The Dynamic Characteristic Analysis of Mechanism with Clearances[J];Mechanical Science and Technology;2001-01
5 Shi Tianlu;Deng Hongzhou;Feng Yuansheng;Dinematic Precision and Reliability Analysis of RCCC Spacial Mechanism[J];MECHANICAL SCIENCE AND TECHNOLOGY;1995-01
6 Song Li 1 Yang Jian Cao WeiQing ( 1Xiangtan University,Xiangtan 411105);The Motion Error Synthesis of Planar Likages Through Monte Carlo Method[J];MECHANICAL SCIENCE AND TECHNOLOGY;1997-03
7 ChengGengdong;GuYuanxian; Wang Jian(Institute of Engineering Mechanics, Dalian University of Technology,Dalian,116023);A PROSPECTIVE REVIEW ON RESEARCH AND APPLICATION OF OPTIMAL DESIGN OF MECHANICAL SYSTEMS IN CHINA[J];JOURNAL OF MECHANICAL STRENGTH;1995-02
8 CHEN Jian jun,CHEN Yong,GAO Wei,ZHAO Zhu qing (School of Electromechanical Engineering, Xidian Univ., Xi′an 710071, China);Reliability analysis and simulation for kinematics accuracy of the flat four-bar mechanism[J];Jounal of Xidian University;2001-06
9 Song Li Yang Jian (College of Mechanical Engineering,Xiangtan University,Xiangtan,411105,China);The Effect of Dimension Type to the Error Transfer Coefficients of Planar Linkage With Pair Clearance[J];NATURAL SCIENCE JOURNAL OF XIANGTAN UNIVERSITY;1999-03
10 Song Li Yang Jian (Department Of Mechanical Engineering Xiangtan University,Xiangtan,411105,China)[HT5〗;THE ANALYSIS OF MOTION ERROR FOR COMPLICATED PLANAR LINKAGE WITH PAIR CLEARANCES[J];NATURAL SCIENCE JOURNAL OF XIANGTAN UNIVERSITY;1998-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved