Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Mechanical Transmission》 2012-12
Add to Favorite Get Latest Update

Study on the Motion Law of the Labeling Machinery Cam Mechanism based on Genetic Algorithm

Li Jing He Chaoming Pang Shengjun Li Huan(School of Mechanical Engineering,Southwest Jiaotong University,Chengdu 610031,China)  
The flexible impact of the conventional cam contour of the labeling machinery is analyzed,a new cam mechanism design method is proposed.Firstly,the movement condition and trajectory equation of the traditional cam mechanism are introduced,as well as the existence problems is pointed out.Secondly,under the given restrains,in order to realize multi-objective requirements of the follower segment angular acceleration of the acceleration curve is increasingly small as much as possible,the linear weighting method of multi-objective planning is used in the optimized analysis,the follower motion equation is redesigned by using the genetic algorithm.Once more,through solving the follower trajectory,then the cam contour is obtained by processing the trajectory.Finally,through after optimized cam profile,the cam mechanism is processed and the test running is carried out.The experimental results show that the cam mechanism of new design reduced the follower flexible impact,and it has a certain practical significance.
【Fund】: 国家自然科学基金(51275431);; 四川省科技支撑科研项目(2010GZ0187);; 中央高校基本科研业务费专项资金(SWJTU09CX018)
【CateGory Index】: TH112.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 6 Hits
1 WANG Ying(Hebei United University,Tangshan 063009,China);Operation Seaming Cam Mechanism of Paper Glass Machine Parametric Design and Movement Simulation[J];Packaging Engineering;2011-17
2 Gao Jianghong(School of Mechanical Engineering,Nanjing Institute of Technology,Nanjing 211167,China);Study on the Sinusoid and Polynomial Curve[J];Journal of Mechanical Transmission;2010-10
3 Li Zhi1, Li Zhansheng1, Yigong LOU2(1.Department of Electrical and Information Engineering, Wuhan Polytechnic University, Wuhan 430023, China;2.Carnegie Institution of Washington, USA);Dynamic simulation of distribution cam mechanism in internal combustion engine based on ant colony algorithm[J];Transactions of The Chinese Society of Agricultural Engineering;2005-06
4 Xing Bin1, Yang Xinting1, Qian Jianping1, Wang Fengli2 (1. National Engineering Research Center for Information Technology in Agriculture, Beijing Academy of Agriculture and Forestry Sciences Beijing 100097, PR China; 2. Key Laboratory of Information Technology in Agriculture, Ministry of Agriculture 3. College of Mechanical and Electronic Engineering, East China Jiaotong University, Nanchang 330013, China);Genetic algorithm based three-dimension bin packing model for regular packaging agricultural products[J];Transactions of the Chinese Society of Agricultural Engineering;2011-08
5 Ge Rongyu1 Li Shiwei2 Liu Li2(1.Shandong University 2.Zibo Vocational Institute);Flexible Cam Curve Expressed by NURBS and Multiobjective Optimization Based on Genetic Algorithm[J];Transactions of the Chinese Society for Agricultural Machinery;2008-02
6 LIU Min-jie(Dept. of Mechanical Engineering, Qingdao Architectural Engineering College, Qingdao Shandong 266033, China);The Design and Research for the Curve of the Picking-up Cam of Labeling Machine[J];Light Industry Machinery;2004-04
Chinese Journal Full-text Database 10 Hits
1 WANG Ying1,SHI Rong2(1.Hebei United University,Tangshan 063009,China;2.Yanshan University,Qinhuangdao 066004,China);Cup Wall Forming Mechanism and Virtual Prototype of JBZ-B Type Automatic Paper Cup Machine[J];Packaging Engineering;2012-09
2 YANG Zhi-jun, KELLY Robert, CHEN Xin, HE Jie (College of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006, China);Optimal design method for cam profile based on mechanism dynamics and control system co-simulation and optimization[J];Journal of Jilin University(Engineering and Technology Edition);2011-01
3 GAO Jiang-hong(Department of Mechanical Engineering,Nanjing Institute of Technology,Nanjing 211167,China);Impact on pressure angle of cam mechanism by speed fluctuation of input shaft[J];Journal of Machine Design;2011-11
4 ZHAO Hao-dong,GUO Pei-quan,CAO Yan-ke (School of Mechanical Engineering,University of Jinan,Jinan 250022,China);Rigid-flexible coupling dynamic simulation on parallel indexing cam mechanism[J];Journal of Machine Design;2012-01
5 Zhang Hongtao 1,2 ,Mao Hanping 1 ,Qiu Daoyin 2 (1.Key Laboratory of Modern Agricultural Equipment and Technology,Ministry of Education and Jiangsu Province,Jiangsu University, Zhenjiang 212013,China; 2.Institute of Electric Power,North China Institute of Water Conservancy and Hydroelectric Power,Zhengzhou 450011,China);Feature extraction for the stored-grain insect detection system based on image recognition technology[J];Transactions of the Chinese Society of Agricultural Engineering;2009-02
6 Wang Guoli1,2,3,Zhang Changfeng1,2,3,Wang Jiamin1,2,3(1.Shandong Key Laboratory of Storage and Transportation Technology of Agricultural Products,Jinan 250103,China;2.National Engineering Research Center for Agricultural Products Logistics,Jinan 250103,China;3.Shandong Institute of Commerce and Technology,Jinan 250103,China);Construction of technology integration theoretical system for temperature-controlled logistics of classified agricultural products[J];Transactions of the Chinese Society of Agricultural Engineering;2012-05
7 YU Xiang-hong1,ZHOU Yi-jun1,DONG Ying1,SHEN Xiong2,ZHAO Kui2(1.School of Mechanical Engineering,Anhui University of Science and Technology,Huainan 232000,China;2.School of Mechanical Engineering,Wuhan Polytechnic University,Wuhan 430023,China);Simulation Analysis of 6-SPS New Hydraulic Support Based on ADAMS[J];Coal Mine Machinery;2012-11
8 WANG Ying1,SHI Rong2,HAN Ju1(1.Hebei United University,Tangshan 063009,China;2.Yanshan University,Qinhuangdao 066004,China);Kinematics Analysis on and Shape Quality Control of Paper Glass[J];Machinery Design & Manufacture;2012-11
9 ZHAO Dong-han1,2, LI Yun-feng1(1. Colleage of Machine and Electric Engineering, Henan Science and Technology University, Luoyang 471009,China; 2. Puyang Vocational Technology Colleage, Puyang 457000,China);Picking-up Plate Parameters and Rubberizing Work-place Cam Curve in Labelling Machine[J];Light Industry Machinery;2008-05
10 ZHANG Junling,LI Aihai (Weifang Science and Technology Vocational College, Shouguang , Shandong Province 262700);Virtual Prototype Design of Rotary Labeling Machine[J];Modern Manufacturing Technology and Equipment;2007-06
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 HOU Wen-ying et al (Institute of Mechanical Engineering,Beijing University of Science and Technology,Beijing 100083);Study on the Decision of Logistics Distribution Mode of Agricultural Product Enterprises[J];Journal of Anhui Agricultural Sciences;2010-06
2 WANG Ying~1,SHI Rong~1,CHU Xin-an~2(1.Yanshan University,Qinhuangdao 066004,China;2.Xinmeixing Packaging Co.Ltd.,Zhangjiagang 215624,China);Motion Analysis and Simulation on the Major Mechanisms of the Paper Cup Machine[J];Packaging Engineering;2006-05
3 WANG Lei,PAN Jin,JIAO Li-cheng (Key Lab for Radar Signal Processing,Xidian Univ.,Xi′an 710071,China);The Immune Algorithm[J];ACTA ELECTRONICA SINICA;2000-07
4 LU Yue e 1,REN Shu guang 2 ,YANG Da ping 3(1.College of Food Science and Technology,HNAU,Changsha 410128,PRC;2.College of Engineering and Technology,HNAU,Changsha 410128,PRC;3.College of Machine and Electronic Engineering of Changde Profession,Changde 415000,PRC);Optimized Dynamics Design of Distribution Cam Mechanism in Internal Combution Engine[J];Journal of Hunan Agricultural University;2002-06
5 QU Qing-Wen (The Provincial Key Laboratory of Precision Mould, Shandong University of Technology, Zibo Shandong 255012, China);Contact Stress Analysis of Outline Surface for the Cam[J];Development & Innovation of Machinery & Electrical Products;2004-03
6 Han Jianfeng Li Minqiang Kou Jisong(Institute of Systems Engineering,Tianjin University,Tianjin300072);Encoding Schemes of Array Problem in Genetic Algorithms[J];Computer Engineering and Applications;2002-12
7 NING Ai-bing1,XIONG Xiao-hua1,2,MA Liang1 1.School of Management,University of Shanghai for Science and Technology,Shanghai 200093,China 2.College of Computer and Information,Shanghai Second Polytechnic University,Shanghai 201209,China;Three-dimensional bin-packing algorithm for urban logistic distribution[J];Computer Engineering and Applications;2009-09
8 ZHONG Shi-quan1,WANG Xue-lian21.School of Management,Tianjin University,Tianjin 300072,China 2.School of Management,Hebei University of Technology,Tianjin 300130,China;Research on three dimensional bin packing problem with multi-type bins based on tabu search algorithm[J];Computer Engineering and Applications;2009-22
9 SUN Di-hua, TU Ping, PENG Guang-han, ZHAO Min(College of Automation, Chongqing University, Chongqing 400044, China);Study on Single Truck Loading of Transportation Based on Genetic Algorithm[J];Computer Simulation;2008-03
10 Cui Yanbin, Sun Yan, Cao Yunpeng;Parametric Design and Dynamic Simulation of Cam based on Pro/E and ADAMS[J];Journal of Mechanical Transmission;2007-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved