Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Mechanical Science and Technology for Aerospace Engineering》 2008-03
Add to Favorite Get Latest Update

On the Intrinsic Property of a Transmission House Considering Assembly Relationship

Li Wujing,Yang Wei,Li Yanxiao,Han Guosheng(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044)  
To deal with the connection or assembly relation correctly for the dynamics characteristic research,an automobile′s transmission house is studied.The assembly relationship is simulated using the multi-point constraints(MPC) technique.The intrinsic property is investigated by building the finite element model of the transmission house.A method for optimizing the dynamic characteristics of the transmission house is put forward from the point of the strain energy.The results show that the dynamic characteristics of transmission house can be optimized by increasing the shell bottom′s rigidity and changing the assembly relationship.Finally,the results of finite element method(FEM) are validated by the mode experiments.The experimental results show that the results by MPC method are more close to the test data,and better than that by the traditional method.
【Fund】: 重庆市科技攻关项目(CSTC 2005AC6035)资助
【CateGory Index】: U463.212
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 Wang Yuanlong1 Wang Liangmo1 Yu Youping2 Chen Guiyin2 Cui Baoliang2(1 Mechanical Engineering Department,Nanjing University of Science and Technology,Nanjing 210094,China)(2 NAVECO Transmission Branch,Nanjing 210028,China);Improved Design and Simulation of Transmission Rear Case with Central Brake[J];Journal of Mechanical Transmission;2012-02
【Citations】
Chinese Journal Full-text Database 7 Hits
1 YANG Jia-hua, GUAN Hua, GUO Ning-jun (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China;College of Mechanical Engineering, Beijing University of Science and Technology, Beijing 100083, China;Beiren Printing Machinery Holdings Limited Co., Beijing 100022, China);The Finite Element Analysis About the Vibration of Printing Presses[J];Journal of Beijing University of Technology;2006-06
2 WU Guo-yang(Mechanic Engineering Dept., Sichuan Electromechanical Institute of Vocation and Technology , Panzhihua 617000,China);Shape Analysis for The Motorcycle Crankcase Based on Iterative Lanczos-Reduce Model[J];Journal of Chongqing Institute of Technology;2005-05
3 YANG Wei~1, QIU Qing-yin~2, HU Jian-jun~1 (1. State Key Laboratory of Mechanical Transmission, Chongqing Unviersity, Chongqing 400030, China; 2. State Key Laboratory of CAD&CG, Zhejiang Unviersity,Zhejiang Hangzhou 310027, China);Modal Shape Analysis Methods of Machine Structure[J];Journal of Chongqing University(Natural Science Edition);2004-06
4 LI De xin 1, LU·· Jiang tao 2, YING Jin chun 2 ( 1Xi′an Jiaotong University,Xi′an 710049; 2Xi′an University of Technology,Xi′an 710048);The Analysis of Static and Dynamic Characteristic for SX360 Type Vehicle Frame[J];Mechanical Science and Technology;2002-03
5 XIN Hong-bing (Institute of Mechanical Automation, Beijing Technology and Business Unive rsity, Beijing 100037);Finite Element Analysis of Stress on Tooth Rim of a Flexspline[J];Mechanical Science and Technology;2003-04
6 CHANG De-gong, MENG Zhao-ming, PAN Yue-fei ( Qingdao University of Science and Technology, Qingdao 266042; Shandong Institute of Architecture and Engineering, Jinan 250013);Stress Analysis of a Tripod Sliding Universal Joint with ANSYS Software[J];Mechanical Science and Technology;2003-S2
7 Guo Xiaodong Li Yong Zhang Mingde,Mi Lin,Li Jun;The model analysis and testing experiment of vibration and noise of automobile gearbox[J];Machinery Manufacturing Engineer;2004-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHAO Fu, XIN Hongbing (Beijing Technology and Business University, Beijing 100037, China);Modal Optimization Design of Rigid Gear of Harmonic Reducer[J];Packaging Engineering;2005-01
2 LI Wen-wei,CHEN Nan,XIE Peng-cheng(Southeast University,Nanjing 211189,China);Finite Element Modeling and Synthesis Analysis of Offset Press[J];Packaging Engineering;2010-15
3 ZHANG Lei,WANG Yi-ming,WU Shu-qin,YANG Hai-kui(Beijing Institute of Graphic Communication,Beijing 102600,China);Vibration Analysis and Study of Transmission System of Printing Press Based on Case Reasoning[J];Packaging Engineering;2012-09
4 WU Guo-yang(Mechanic Engineering Dept., Sichuan Electromechanical Institute of Vocation and Technology , Panzhihua 617000,China);Shape Analysis for The Motorcycle Crankcase Based on Iterative Lanczos-Reduce Model[J];Journal of Chongqing Institute of Technology;2005-05
5 WEN Xiao-Xia1,DU Zi-xue1,KANG Zhong-wen2,SUN Ze-bo2(1.Machine and Automobile Institute of Chongqing Jiaotong University,Chongqing 400074,China; 2.Chongqing Golden Crown Automotive Manufacturing Co.,Ltd.,Chongqing 400041,China);Optimization of Aluminum Alloy Case of Commanding Car[J];Journal of Chongqing Jiaotong University(Natural Science);2010-06
6 XIAO Deng-hong,WANG Jun-yuan,ZENG Zhi-qiang,DU Wen-hua(School of Mechanical Engineering & Automation,North University of China,Taiyuan 030051,China);Research on dynamic characteristics of an explosion-proof rubber-tyred vehicle[J];Journal of Engineering Design;2011-01
7 SU Wen-gui,WEN Jie-ming,CHEN Jia-quan,BIAN Li-jing,GENG Kui-hua(College of Mechanical Engineering,Guangxi University,Nanning 530004,China);Failure analysis and experimental study on truck's frame[J];Journal of Guangxi University(Natural Science Edition);2011-05
8 GONG Jin1,2,ZUO Jie1,ZHU Jun-lin1(1.State Key Laboratory of High-performance Complicated Manufacturing,Central South University, Changsha 410083,China;2.Hunan Sunward Intelligent Machinery Co.,Ltd,Changsha 410100,China);Finite analysis and sensitivity research of the arm of excavator[J];Journal of Guangxi University(Natural Science Edition);2013-02
9 ZHAO Mingming,WANG Yiming,YUAN Yingcai, LI Jianguo,ZHU Qiang(Beijing Institute of Graphic Communication,Beijing 102600,China);The Application of Modal Analysis in Vibration of Printing Press[J];Journal of Beijing Institute of Graphic Communication;2013-04
10 ZHANG Liang1,YANG Wei1,CHEN Xiaoan1,LIU Deyong2(1.State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China;2.Chongqing No.2 Machine Tool Works,Chongqing 401336,China);Research on Inherence Properties of CK6310 NC Headstock[J];Machine Tool & Hydraulics;2008-02
China Proceedings of conference Full-text Database 2 Hits
1 Hu Nianwu1 ,Chen Nan1 ,Li Wenwei1 ,Sha Xiaoming2 ,Qian Jin2 (1School of Mechanical Engineering,Southeast University,Nanjing 211189,2Jiangsu Changsheng Group Limited Company);Dynamics Modeling and Optimization of Offset Printing Press Structure[A];[C];2009
2 LU Li-min (Nanjing Research Institute of Electronics Technology, Nanjing 210013, China);Structure Design of a Fast Mobile Platform of Radar[A];[C];2008
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Han Jinzhang (China North Vehicle Research institute Beijing 100072);Application of I-DEAS Master Series Software to Analyzing the Stiffness and Strength of Large Casing Components[J];;1997-03
2 SHAO Peng-li, WANG Jian, DU Ming-gang (China North Vehicle Research Institute, Beijing 100072,China);Finite Element Analysis of a Power Transmission System’s Strength[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2005-01
3 LIU Wen a, LIN Teng-jiao, LI Run-fang, DU Xue-song State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, P. R. China;Finite element analysis of dynamic response and structure borne noise of gearbox[J];重庆大学学报(英文版);2007-02
4 XU Yan,CHEN Yu-dong,YANG Zhi-jun,CNEN Su-huan(Dept.of Mechanics,Nanling Campus of Jilin University,Changchun 130022,China);Location optimization of stiffeners of transmission housing for a truck[J];Journal of Harbin Institute of Technology;2009-03
5 ZHANG Yong-li,WANG Yong,YUAN Ji-you(Technology Center,Anhui Jianghuai Automobile Co.,Ltd,Hefei 230022,China);Testing and study for car engine mount isolation vibration[J];Journal of Hefei University of Technology(Natural Science);2007-S1
6 LONG Ying1,TENG Zhao-jin2,ZHAO Fu-shui2(1.Hunan Modern Logisties College,Changsha,Hunan 410128,China;2.Hunan agricultural University,Changsha, Hunan 410128,China;3.Sanyi Electrical and Technical School,Changsha,Hunan 410131,China);The present status and development trends of finite element modal analysis[J];Hunan Agricultural Machinery;2009-07
7 Huang Chenggang; Liu Yongchao ;Tang Shubin;Analysis of Frequency Response on Body[J];JOURNAL OF HUBEI AUTOMOTIVE INDUSTRIES INSTITUTE;1999-04
8 ZHAN Wen-feng,DU Qun-gui,REN Shao-yun,HUANG Xiao-dong(College of Automotive Engineering,South China University of Technology,Guangzhou 510640,China);A dynamic simulation of meshing force in Involute planet gears[J];Machinery Design & Manufacture;2007-08
9 DENG Hong-chao1,MA Wen-xing1,KANG Yi-po2(1College of Mechanical Science and Engineering,Jilin University,Changchun 130022,China)(2Technology Center of First Automobile Group of China,Changchun 130011,China);Strength analysis of heavy automobile transmission case based on multi-part contact[J];Machinery Design & Manufacture;2009-04
10 CHEN Qi-ming,HUANG Wen-jun,HU Si-bing,WANG Peng-liang,YU Yao-ping (Hefei General Machinery Research Institute,Hefei 230031,China);Numerical simulation of finite element method for interference fit of blower impeller[J];Machinery Design & Manufacture;2010-08
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 YANG Jia-hua, GUAN Hua (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China; Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China );Test and Analysis of the Vibration of Printing Press[J];Journal of Beijing Polytechnic University;2004-01
3 Li Lianjin;Zhang Weiping;An Approach to Noise Suppression of Gear Boxes[J];;1989-04
4 ZHU Cai-chao 1, LUO Jia-yuan 1, HUANG Ze-hao 2, XIE Yun-chun 1 (1.The State Key Lab of Mechanical Transmission Chongqing University ,Chongqing 400044,China; 2.Jianshe Industries Co.,LTD,Chongqing 400050, China);Dynamic Analysis of Motorcycle Frame[J];Journal of Chongqing University(Natural Science Edition);2003-07
5 YANG Wei~1, QIU Qing-yin~2, HU Jian-jun~1 (1. State Key Laboratory of Mechanical Transmission, Chongqing Unviersity, Chongqing 400030, China; 2. State Key Laboratory of CAD&CG, Zhejiang Unviersity,Zhejiang Hangzhou 310027, China);Modal Shape Analysis Methods of Machine Structure[J];Journal of Chongqing University(Natural Science Edition);2004-06
6 Tao Zeguang Li Runfang Lin Tengjiao (Chongqing University,Chongqing,China);Model Analysis of Gear System by Finite Element Method[J];Machine Design and Research;2000-03
7 Chen Long Liu Xingrong (Jiangsu Institule of Technology);DYNAMIC CHARACTERISTIC OF TRACTOR CABIN[J];Journal of Mechanical Strength;1990-04
8 Feng Guosheng (Hebei Bus Factory, Shi Jiazhuang, 050061)Jia Sumei(Hebei Provincial Research institute of Agricultural Mechanization,Shi Jiazhuang 9 05001 1);THE FINITE ELEMENT ANALYSIS AND ITS APPLICATION FOR LIGHT BUS[J];JOURNAL OF MECHANICAL STRENGTH;1996-02
9 LIANG Shang ming 1,ZHANG Jun fu 2,XU Li ju 1,XU Jun guang 1,JIANG Li mao 3 (1.Manufacturing Shool of Sichuan University, Chengdu 610065, China;2.Sichuan Institute of Technology;3.Sichuan Research & Design Institute of Agricultural Machinery);Finite element modality analysis of swinging movable teeth reducer box[J];Machine Design;2003-01
10 Li Hui & Li Wanqiong;The Equivalent Load Determination of Truck Frame[J];Automotive Engineering;1994-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved