Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Machine Design》 2001-08
Add to Favorite Get Latest Update

Finite element analysis on root stress of involute cylindrical spur gears

WANG Yu xin et al (school of Mechanical Engineering,Tianjin University)  
On the basis of principle of engagement this paper established a precise model of tooth profile.Taking this as a base,a finite element model of the whole gear plane was established,and the analytical calculation was advanced.The selection principle of model parameters has leen summarized according to the result of calculation while the finite element analysis was made on root stress of gear tooth.The 2D and 3D model formed under the selection principle have been calculated separately and a comparison is carried out on the calculated results of various models.The validity of the above mentioned principle was verified.
【Fund】: 霍英东教育基金会高等院校青年教师基金资助项目 ( 71 0 4 9)
【CateGory Index】: TH132.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 OUYANG Zhong-he (Hunan Vocational and Technical College of the Electrical and Mechanical,Changsha 410126,China);A Comparative Design Study of Two Kinds of Gearwheel Mechanism Design Method[J];Journal of Guizhou University of Technology(Natural Science Edition);2008-01
2 WANG Zhe,HU Ying-feng(College of Mechanics and Automation,Wuhan Univ.of Sci.and Technology,Wuhan 430081,China);Gears Modeling And Contact-stress Analysis[J];Journal of Hubei University of Technology;2006-03
3 BAO Jia-han,ZHANG Yu-hua,XUE Jia-guo(School of Mechanical Engineering, Anhui University of Technology, Ma'anshang 243002, China);Parameter Modeling and it's Application of Gear Based on Ansys[J];Journal of Anhui University of Technology;2005-01
4 Zhou Changjiang, Tang Jinyuan, Wu Yunxin;The Comparative Study of the Bending Stress and Elastic Deformation Calculation of Gear tooth[J];Journal of Mechanical Transmission;2004-05
5 Bao Jiahan, Zhang Yuhua, Xue Jiaguo;The Finite Element Solution of Load Distribution among Teeth in Meshing Process of Spur Gear[J];Journal of Mechanical Transmission;2004-05
6 Li Changyi, Lu Yaohui, Zhou Jiwei;Research of Involute Cylindrial Gear Modeling Technology Based on ANSYS[J];Journal of Mechanical Transmission;2004-06
7 Qiao Xueyi, Guo Bo, Zou Limei;Finite Element Analysis of Tooth Root Stress for Straight Bevel Gear Based on ANSYS and Pro/E[J];Journal of Mechanical Transmission;2006-05
8 LIU Shan-lin,LV Xing-xia(1.Hefei University of Technology,Hefei 230009,China;2.Hefei Zhangsheng Decorative Design Engineering Co.Ltd,Hefei 230011,China);Root Stress Analysis of Spur Gear Based on COSMOSWorks[J];Mechanical Engineer;2008-09
9 YANG Fen ai,ZHANG Zhi qiang,LONG Xiao le,BAO Wu jun (School of Dynamic and Mechanical Engineering, Wuhan University, Wuhan 430072);Finite Element Analysis of Helical Gear's Contact Stress Based on Precise Model[J];Mechanical Science and Technology;2003-02
10 TANG Jin-yuan 1,2, ZHOU Chang-jiang1, WU Yun-xin1 (1 School of Mechanical and Electrical Engineering, Central South University , Changsha 410075; 2 State Key Laboratory of Mechanical Transmissions, Chongqing University , Chongqing 400044);A Method for Exact Modeling of the Bending of Spur Gear Teeth by FEM[J];Mechanical Science and Technology;2004-10
China Proceedings of conference Full-text Database 1 Hits
1 WANG Zhe, HU Ying-feng (College of Mechanics and Automation ,Wuhan Univ. of Sci. and Technology , Wuhan 430081,China);Gears Modeling And Contact-stress Analysis[A];[C];2006
Chinese Journal Full-text Database 10 Hits
1 Sun Wenhuan;Wang Mohu(XIDIAN University)(Northwestern Polytechnical University);ANALYTICAL COMPUTATION OF DAMAGES AND COMPUTER SIMULATION OF PROCESSES OF FAILURE FOR MACHINE PARTS[J];Acta Armamentarii;1994-02
2 Dong Yuping Wang Zhonghua Zhu Ruifu Wang Jianming Wang Shouyou(College of Mach. Eng. Shandong Univ. of Tech.,Jinan,250061);FINITE ELEMENT ANALYSIS OF THREE DIMENSIONAL CONTACT STRESS IN AIRCRAFT CYLINDRICAL GEARS[J];ACTA ARMAMENTARII;1999-02
3 FENG Rong tan,TIAN Zhu you (Department of Mechanical Engineering, Beijing Institute of Machinery, Beijing 100085,China);HOW TO IMPLEMENT THREE-DIMENSION MODELING OF GEAR WITH UNIGRAPHICS(UG)[J];Journal of Beijing Institute of Machinery;2000-04
4 TAN Yue sheng,YAO Wen xi,ZHANG Chun yan (Department of Mechanical Engineering, Beijing Institute of Machinery, Beijing 100085,China);How to implement three-dimension modeling of cycloid with Pro/Engineer and how to input the model into ANSYS for analysis[J];Journal of Beijing Institute of Machinery;2001-04
5 TIAN Zhu-you ,FENG Rong-tan ( Department of Mechanical Engineering, Beijing Institute of Machinery,Beijing 100085 ,China;School of Mechanical Engineering and Automatoin,University of Aeronautics and Astronautics,Beijing 100084 .China);Virtual machine of planetary gear drive[J];Journal of Beijing Institute of Machinery;2005-01
6 Zhou Yanze;Wu Jize(Beijing University of Aeronautics and Astronautics,Dept.of Mechanical and Electrical Engineering);FINITE ELEMENT ANALYSIS OF TOOTH ROOT STRESS OF STRAIGHT BEVEL GEAR[J];JOURNAL OF BEIJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS;1996-01
7 Chen Lizhou; Yu Xiaohoung; Weng Haishan(Mechanical Engineering School,UST Beijing,Beijing 100083,China);Robust Engineering Design by Stochastic Optimization[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1999-01
8 Shu Xiaolong (College of Automation Engineering);Study of Loads Acting on Gear Teeth in Planetary Gearing With Small Tooth Number Difference[J];Journal of Beijing Union University;1991-02
9 Wang Naikang; Liu Huimin; Mao Yebing.School of Technology,Beijing For.Univ., 100083,P.R.China.;Effects of working parameters on dynamic mechanical parameters for digging machine(I). Test and study of dynamic mechanical parameters for digging machine.[J];Journal of Beijing Forestry University;2002-Z1
10 Wan Guodong Liu Huran;THEORATIC BASIS ON LOAD DEVIATION AND SHAPE MODIFICATION OF GEARS[J];Journal of Baotou University fo Iron and Steel Technology;1989-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 TIAN Wei1,2,FU Shuang-xue2,LI Chang-yun1 (1.Changsha Aeronautical Vocational and Technical College,ChangSha Hunan 410124;2.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,ChangSha Hunan 410082);Research of APDL and MATLAB Mix Modeling Method Based on Text Data File[J];Journal of Changsha Aeronautical Vocational and Technical College;2008-01
2 TIAN Wei1,FU Shuang-xue2,LI Chang-yun1(1.Changsha Aeronautical Vocational and Technical College,Changsha Hunan 410124;2.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, HuNan University,Changsha Hunan 410082);Reasonable Analysis of Root Stresses and Teeth Compliances Based on ANSYS[J];Journal of Changsha Aeronautical Vocational and Technical College;2008-04
3 PU Tai-ping,TANG Jin-yuan,ZHANG Ya-nan,HU Liang-hong(College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Three-dimension solid model of gear based on Pro/E mechanism function[J];Journal of Engineering Design;2007-02
4 LI Jie,SUN Qing-jun,WANG Le-qin(Institute of Chemical Machinery,Zhejiang University,Hangzhou 310027,China);Tooth contact analysis of involute gear[J];Journal of Engineering Design;2009-01
5 TANG Jin-yuan,PU Tai-ping(College of Mechanical and Electrical Engineering,Central South University,Changsha Hunan 410083,China);The Gear Manufacture Simulation and the Solid Modeling Based on the Gear Generation Principle[J];Journal of Engineering Graphics;2007-05
6 LIU Peng-fei,HUANG Yong-qiang,LI Xue-gang(School of Mechanical Engineering,Hebei Polytechnic University,Tangshan Hebei 063000,China);The Finite Element Modeling and Analysis of Involute Helical Gear[J];Equipment Manufacturing Technology;2006-04
7 CHEN Ying(Liuzhou Vocational & Technical College,Liuzhou Gunagxi 545006,China);Research and Design of Anti-transmission Expiration on Cylindrical Gears[J];Equipment Manufacturing Technology;2009-09
8 FAN Jia,Meng Xian-ju,CAI Yu-qiang(College of Mechanical Engineering,Hebei Polytechnic University,Tangshan Hebei 063009,China);Parameter Design of Involute Vertical Gear Based on Precise Modeling[J];Journal of Hebei Institute of Technology;2006-01
9 ZHENG Ai-yun,LU Wei-min,TIAN Lü-zhu(College of Mechaical Enginerring,Hebei Polytechnic University,Tangshan Hebei 063009,China);Summarization on Research for Wear in Gear Transmission[J];Journal of Hebei Institute of Technology;2006-03
10 Jiang li (School of Mechanical and Electrical Engineering, XinJiang Vocational University,Wulumuqi 830013, China);Finite element model and analysis of involute helical gear based on ANSYS[J];Journal of Harbin Bearing;2008-03
China Proceedings of conference Full-text Database 2 Hits
1 SONG Guang-xing~1 LIN Zhen~1 ZHANG Xin~2 JI Guang-xue~1 LIU Song~1 LIU Ming-shuang~2 (1.Offshore Oil Engineering (Qingdao) Co.,Ltd.,Qingdao Shandong 266520,China;2.Offshore Oil Engineering Co.,Ltd.,Tianjin 300452,China);3-Dimensional Contacting Finite Element Analysis for Self-elevating Platform Gear and Rack Driven Set[A];[C];2008
2 ZHAO Guang LIU Zhansheng WANG Yongliang CHEN Feng (School of Energy Science and Engineering,Harbin Institute of Technology,Harbin,150001);THEORY AND EXPERIMENT RESEARCHS ON CRITICAL SPEEDS OF ROTOR SYSTEM WITH DIFFERENT TYPES OF COUPLINGS[A];[C];2008
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved