Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Machine Design》 2006-10
Add to Favorite Get Latest Update

Study on topological optimization design of constrained damping plate based on evolutionary structural optimization

GUO Zhong-ze,CHEN Yu-ze,DEN Ke-wen,HOU Qiang(Institute of Overall Engineering,China Institute of Engineering Physics,Mianyang 621900)  
On the basis of topological Evolutionary Structural Optimization method(ESO) and taking the needed amount of damping material as the constraint condition,and the maximization of loss factor of modality as the target function,the problem of topological optimization design for constraint damping plate structure was studied.The formula of sensitivity analysis was derived;the topological optimization designing method of damping structure was presented,and the topological configuration of maximum modality loss factor of the constraint damping plate structure under certain needed amount of damping material was obtained.This method has certain significance on the optimization design of damping structure,and has comparatively strong practicality in engineering.
【Fund】: 中国工程物理研究院科学技术基金资助项目(20060321)
【CateGory Index】: TH122
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 GUO Zhong-ze1,ZHANG Wei-hong2,CHEN Yu-ze1(1.Research Institute of Overall Engineering,China Academy of Engineering Physics,Mianyang 621900,China;2.Sino-French Joint Laboratory of Parallel Engineering,Northwest Polytechnic University,Xi'an 710072,China);An overview on the topological optimization design of structures[J];Journal of Machine Design;2007-08
【Citations】
Chinese Journal Full-text Database 2 Hits
1 YANG De-qing, LIU Yong-jun, JIN Xian-ding (Research Institute of Structural Mechanics,School of Naval Architecture and Ocean Engineering,Shanghai Jiao long Universily.Shanghai 200030, China; Northern Jiaotong University,Beijing 100044,China) E-mail address: yangdq@sjtu.edu.cn (yang De-qing);Structural Topology Optimal Design to Reduce Vibration and Noise of Thin Plate[J];Journal of Ship Mechanics;2003-05
2 YANG De-qing (School of Naval Architecture & Ocean Eng., Shanghai Jiaotong Univ., Shanghai 200030, China);Topological Sensitivity Method for the Optimal Placement of Unconstrained Damping Materials under Dynamic Response Constraints[J];Journal of Shanghai Jiaotong University;2003-08
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 GUO Zhong-ze,CHEN Yu-ze,HOU Qiang,CHE Bi-qin (Institute of Systems Engineering,China Academy of Engineering Physics,Mianyang 621900,Sichuan,China);Damping Material Optimal Placement in Damping Structure Design[J];Acta Armamentarii;2007-05
2 GUO Feng-jun, YANG De-qing (School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiaotong University, Shanghai 200030, China);Optimization design of the gearbox mounting under vibration level difference constraints[J];Ship Engineering;2008-04
3 DING Xiao-hong,CHEN Jian-lai,CHENG Li(College of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China);A bionic approach of topology design optimization for vibration-proof plate and shell structures[J];Journal of Ship Mechanics;2008-01
4 ZHUANG Cai-ao,RONG Jian-hua,LI Dong-bin(College of Automobile and Mechanic Engineering,Changsha University of Science and Technology,Changsha 410076,China);Multi-frequency topology optimization design and research of three dimensional structure[J];Journal of Changsha Communications University;2007-02
5 SHI Meng1,ZHANG Jun2,FANG Ji2,ZHAO Wen-zhong2(1.Vocation and Technical College,Liaoning Technical University,Fuxin 123000,China;2.School of Traffic and Transportation Engineering,Dalian Jiaotong University,Dalian 116028,China);Study of Vibration and Noise Reduction by Minimizing Vibration Velocity for Plate Based on FEM/BEM[J];Journal of Dalian Jiaotong University;2009-02
6 WU Zhong-bo,LI Shu(School of Aeronautic and Technology,Beijing University of Aeronautic and Astronautics,Beijing 100083,China);Topology Optimization in Static and Dynamic States Based on Optistruct[J];Aeronautical Computing Technique;2006-06
7 MA Yong-tao,ZHOU Yan(The 711 Research Institute of CSIC,Shanghai200011,China);Summary of floating raft system[J];Ship Science and Technology;2008-04
8 LUO Fang1,YANG De-qing1,DAI Lang-tao2(1.School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiaotong University,Shanghai 200030,China;2.Shanghai Prosynx Technology Co.,Ltd,Shanghai 200233,China);Dynamics calculation of gearbox mounting based on FE-SEA hybrid method inbroadband frequency domain[J];Ship Science and Technology;2009-02
9 Zhou Xingde(Department of Engineering Mechanics,Hohai University,Nanjing 210098);Optimal damper and collocations of Building Structures[J];Chinese Journal of Applied Mechanics;2005-02
10 Zhang Jun~1,2 Zhao Wen zhong~1 Zhang Wei ying~2(Mechanical Engineering Department,Dalian JiaoTong University,DaLian 116028 China)~1(Mechanical Engineering Department,Dalian Fisheries University,DaLian 116023 China)~2Absgract: The optimum design model of coupled acoustic-structure systems is established for reducing noise due to structure vibration and structure weight simultaneously,where the objective is aimed to minimizing the structure weight with acoustic pressure restriction of the interesting points.The acoustic response characters are evaluated based on the 3-D FEM model with direct method.Regarding the shell thickness as the design parameter,the sizing design optimization is implemented by the feasible direction method within a frequency range of 1Hz~200Hz.The optimal design is obtained via 47 iterations with 6 dB pressure downhill and 1.88Kg weight reduction.;Optimum Weight Design of Plate with Acoustic Pressure Restrict for Coupled Acoustic-Structure Systems[J];Chinese Journal of Applied Mechanics;2006-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Yang Xue Wang Yuansheng Zhu Jinhua Yu Hongwei;Research and optimization of compounded damping structure's damping performance[J];Ship & Boat;2005-03
2 LIU Lin-chao, ZHANG Wei (Institute of Applied Mechanics of Jinan University, Guangzhou 510632, China);On the Damping Properties of Viscoelastic Materials Modeled by Fractional Maxwell[J];Journal of Materials Science and Engineering;2004-06
3 SUN Hai-zhong,ZHANG Wei(Institute of applied Mechanics of Jinan University,Guangzhou 510632,China);Study on Constitutive Relation of Viscoelastic Material Described by Fractional Operator[J];Journal of Materials Science and Engineering;2006-06
4 LIUShu-tian~*,CHENXiao-xia,CHANGChong-yi alian 116024, China );Size effect on elastic constants of composite materials[J];Journal of Dalian University of Technology;2004-02
5 WANG Ye-hua,ZHOU Yun,DING Kun(Department of Civil Engineering,Guangzhou University,Guangzhou 510405,China);Recent Advances in Research and Applications of Viscoelastically Damped Structure[J];Journal of Disaster Prevention and Mitigation Engineering;2006-01
6 YI Wei-jian , LIU Xia (Civil Engineering College of Hunan University, Hunan 410082, China);GENETIC EVOLUTIONARY STRUCTURAL OPTIMIZATION[J];Engineering Mechanics;2004-03
7 RONG Jian-hua1 , JIANG Jie-sheng2 , YAN Dong-huang1 , ZHAO Ai-qiong1 (1. School of Automobile and Mechatronic Engineering, Changsha University of Science & Technology, Hunan Province 410076, China; 2. Institute of Vibration Eng., Northwestern Polytechnical University, Xi抋n 710072, China;;EVOLUTIONARY OPTIMIZATION DESIGN OF STRUCTURAL TOPOLOGY BASED ON MAN-MADE MATERIAL[J];Engineering Mechanics;2004-05
8 LUO Wen-bo~(1,2), YANG Ting-qing~3, WANG Xia-yu~1 (1.College of Chemistry, Xiangtan University; 2.Institute of Fundomental Mechanics & Material Engineering, Xiangtan Universty, Xiangtan 411105, China; 3.Department of Mechanics, Huazhong Universiy of Science and Technology, Wuhan 430074, China);EFFECTS OF TEMPERATURE AND STRESS LEVEL ON THE FREE VOLUME IN HIGH POLYMERS[J];Polymeric Materials Science & Engineering;2005-03
9 Luo Wenbo 1,2 Yang Tingqing 1 An Qunli 1 ( 1 Department of Mechanics, Huazhong University of Science and Technology, Wuhan, 430074) ( 2 Institute of Fundamental Mechanics and Material Engineering, Xiangtan University, Xiangtan, 411105);TIME-TEMPERATURE-STRESS EQUIVALENCE AND ITS APPLICATION TO NONLINEAR VISCOELASTIC MATERIALS[J];Acta Mechanica Solida Sinica;2001-03
10 YANG Xue1, WANG Yuan\|sheng2, ZHU Jin\|hua1, YU Hong\|wei1(1.Dept. of Basic Course, Naval Univ. of Engineering, Wuhan 430033, China; 2.Administrative Office of Training, Naval Univ. of Engineering, Wuhan 430033, China);Optimization of damping structures with two\|layer viscoelastic materials[J];Journal of Naval University of Engineering;2003-04
【Secondary References】
Chinese Journal Full-text Database 7 Hits
1 SUI Yun-kang , YE Hong-ling , LIU Jian-xin , CHEN Shi , YU Hui-ping (Numerical Simulation Center for Engineering, Beijing University of Technology, Beijing 100124, China);A STRUCTURAL TOPOLOGICAL OPTIMIZATION METHOD BASED ON EXPLORING CONCEPTUAL ROOT[J];Engineering Mechanics;2008-S2
2 SHA Wei1,2,CHEN Chang-zheng1,ZHANG Xing-xiang1,XU Yan-jun1,REN Jian-yue1(1.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;2.Graduate School of Chinese Academy of Science,Beijing 100039,China);Topological Lightweight Design of Space Mirror[J];Opto-Electronic Engineering;2009-04
3 XIE Li-jun (Aviation Equipment Deputy Office of Navy Stationed in Xi′an,Xi′an 710068,China);Application of Topology Optimization in Construct Design of Air-bomb Computer[J];Aeronautical Computing Technique;2009-01
4 LI Dongze1 YU Dengyun2 MA Xingrui2(1 China Academy of Space Technology,Beijing 100094,China)(2 China Aerospace Science and Technology Corp.,Beijing 100037,China);Review of Modelling for Structural Optimization[J];Spacecraft Engineering;2009-04
5 LI Wei-da,WAND Peng-fei,CHEN Xu-gui,SUN Li-ning(State Key Laboratory of Robotics and System,Harbin Institute of Technology,Harbin 150080,China);Structural topology optimization of a micro resonant robot based on genetic algorithm[J];Machinery Design & Manufacture;2009-10
6 Yu Duonian,Wang Dengfeng,Wang zhenhua,Wang Jianyong(1.Jilin University;2.Shanghai SICAR Vehicle Technology Development Co.,Ltd;3.ChangChun Yuchuang Digital Auto Technology Co.,LTD);Light Weight Design of Heavy Duty Truck Cab Based on Topology Optimization[J];Automobile Technology;2009-09
7 MA Zhao-cai CHEN Hua LIU Wei (Changchun Institute of Optics,Fine Mechanics and Physics, Chinese Academy of Sciences,Changchun 130033,China) (Graduate School of the Chinese Academy of Sciences,Beijing 100039,China);Topologic Optimization Design of Telescope Main Frame Based on Optistruct[J];Microcomputer Information;2009-22
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 YANG De qing 1, LIU Zheng xing 1, SUI Yun kang 2 1.School of Civil Engrg. & Mech., Shanghai Jiaotong Univ., Shanghai 200030, China; 2.Beijing Polytechnic Univ., Beijing 100022, China;ICM Method for Topology Optimization Design of Continuum Structures[J];JOURNAL OF SHANGHAI JIAOTONG UNIVERSITY;1999-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved