Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Chinese Journal of Mechanical Engineering》 2003-12
Add to Favorite Get Latest Update

CONTROLLED BY COMPUTER'S CENTRIFUGAL CLUTCH TO ADD POWER WITH HYDRAULIC PRESSURE AND ELECTROMAGNETISM

Tan Lixin Ning Liwei Zhou Zirong (Hunan Institute of Engineering)  
The centrifugal clutch to add power with hydraulic pressure and electromagnetism is introduced. The operation principle is explained. The calculation formulas of output force and driving torque, joint angular velocity and joint speed, rated angular velocity and rated speed and maximum load of spring are presented. The structure of this clutch is compact. It can greatly improve the abilities of driving torque, synthetically considering designing clutch. Leave the function of clutch under the comprehensive consideration of equipment's computer control system as a small system. To realize the best starting time and starting second under its auto-control, according to the need and working state of the equipment, is the manufacturing and developing direction.
【Fund】: 湖南工程学院重点课题
【CateGory Index】: TH133.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 TAN Li-xin,LIU Ying-chun,LI Jian-jun,NIN Li-wei(Dept.of Mech.,Hunan Institute of Engineering,Xiangtan 411101,China);Design of Electrical Control No-feetplate Automobile Clutch[J];Journal of Hunan Institute of Engineering(Natural Science Edition);2006-03
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Zhong Kangmin;Guo Peiquan (Jinan University) Hu Bingchen (Jilin University of Technology);ECNTRIFUGAL CLUTCH WITH ORTHOGONAL FORCE AMPLIFIER[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;2000-04
2 Zhang Junzhi (Qinghua University) Wang Lifang (Chinese Academy of Sciences) Ge Anlin (Jilin University of Technology);STUDY ON THE CONTROL LAW OF AUTOMATED MECHANICAL TRANSMISSION CLUTCH[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1999-03
3 Gao Zexiang; et al;Design of Main Drive with Short Chain for New Median Size Horizontal lathe[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1997-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Bo lan, SUN Ye bao (School of Vehicle & Transportation Engineering,Beijing Institute of Technology,Beijing 100081,China);OSEK/VDX--An Open-Architectured Platform of Vehicle Electronics System[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2002-02
2 Huang Guansheng; Ding Huarong; Yang Qing (Beijing Institute of Technology, Beijing, 100081);A STUDY ON A RAPID RESPONSE SOLENOID VALVE[J];Acta Armamentarii;1998-02
3 Huang Guansheng Zhang Qinliang Zhang Youming (Beijing Institute of Special Vehicles);A STUDY ON INTELLIGENT FUEL-CUT-OFF DEVICE FOR DIESEL ENGINES[J];Acta Armamentarii;2001-04
4 LIN Feng~1,LIU Ying~2,CHEN Man~2(1.The Military Representative Office in 627th Factory,Xiangtan 411100,Hunan,China;2.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);The Application on Electro-hydraulic Proportional Valve for Buffering Control of Vehicle Shift Clutch[J];Acta Armamentarii;2006-05
5 LI Yong,DING Fan,MAN Jun,SHAO Sen-yin(State Key Laboratory of Fluid Power Transmission and Control,Zhejiang University,Hangzhou 310027,Zhejiang,China);Research on the Method of Low-power Consumption Design for Linear Force Motor[J];Acta Armamentarii;2009-06
6 TANG Xia qing, HOU Chao zhen (Dept. of Automatic Control, Beijing Institute of Technology, Beijing100081, China);A Study of Engagement Control for AMT Clutch Using Quantitative Feedback Theory[J];Journal of Beijing Institute of Technology;2002-01
7 Jiang Fang(Baotou Vocational Technical College,Baotou Inner Mongolia,014030,China);The Idle Control of Electrically Controlled Gasoline Injection[J];Journal of Baotou Vocational Technical College;2002-01
8 Yang Yongjian Huang Yongping(Dept,of Computer Eng. ,Chengchun Post and Telecommun Inst .,Chengchun,China,130012);Research on the system dynamic character of single-inspired electromagnet[J];JOURNAL OF CHANGCHUN POST AND TELECOMMUNICATION INSTITUTE;1994-03
9 SJTU Wu PingYou Huang He Cheng Qing[;The Engine Knock Analysis and Control[J];;2003-03
10 LIU Dong~1,DONG Cun-xue~1,YU Cheng-bo~2 (1. Department of Mechanic and Electronic Engineering, North China Institute of Technology, Taiyuan 030051,China; 2. Department of Electronic Engineering, Chongqing Institute of Technology, Chongqing 400050,China);Discussion on the Fuel Injection Control System of Gasoline Engine[J];Journal of Chongqing Institute of Technology;2004-02
China Proceedings of conference Full-text Database 2 Hits
1 Huang huaxing Quan ymghua Sun jiping Zhang jizheng Huang jingyuan Tsinghua University,Beijing,P.R.China,100084;THE DEVELOPMENT OF HYDRODYNAMIC TORQUE CONVERTER INCLUDING OVERRUNNING CLUTCH[A];[C];2002
2 Wang Zhu,Wang Qi,Liu Wei,Wang Ling(Harbin Institute of Technology At WeiHai,WeiHai 264209,China);The Research of Electronic Combined Meters of Automobile Based on CAN-Bus[A];[C];2007
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Tan Lixin (Hunan Institute of Engineering, Xiang Tan 411001);Centrifugal Outeh with Hydraulic Pressure and Electromagnetism[J];Machine Tool & Hydraulics;2003-01
2 Zhong Kangmin Guo Peiquan Cong Lin(Dept.of Mechanical and Electronics Engineering)Wang Zichang(Association of Science and Technology of Zibo);RESEARCH ON SUPER - REINFORCEMENT CENTRIFUGAL MECHANISM[J];Journal of Jinan University;1997-02
3 Wang Mingdi, Zhong Kangmin, Zuo Dunwen Wang Min;Centrifugal Clutch of Toggle Two-steps Orthogonal Force Amplifier[J];Journal of Mechanical Transmission;2007-05
4 Zhong Kangmin;Guo Peiquan (Jinan University) Hu Bingchen (Jilin University of Technology);ECNTRIFUGAL CLUTCH WITH ORTHOGONAL FORCE AMPLIFIER[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;2000-04
5 Xi Gang;Zhang Jianwu; Chen Li (Shanghai Jiaotong University);NONLINEAR CONTROL OF MEMBRANE SPRING CLUTCH[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;2000-09
6 Jinan University Zhong Kangmin Song Qiang Guo Peiquan;Clamping Hole Wall of Workpiece by Using Centrifugal Fixture with Edge Force Amplifier[J];NEW TECHNOLOGY & NEW PROCESS;1999-05
7 Jinan University Sun Bei Zhong Kangmin;Face Driver Center with Quasi-pressure-equalizing Device Used on NC Lathe[J];NEW TECHNOLOGY & NEW PROCESS;2000-07
8 Feng Pingfa1 Yu Dingwen1 Wu Zhijun1 Uhlmann E21.Tsinghua University,Beijing,1000842.Technical University Berlin,Berlin,Germany,10587;Research on Clamping Characteristics of Modern Chuck with Centrifugal Force Compensation at High Speed Turning[J];China Mechanical Engineering;2007-14
9 WANG Deyun ZHONG Kangmin;The centrifugal end-drive center used in high-speed NC lathe[J];Modular Machine Tool & Automatic Manufacturing Technique;2002-02
10 Gao Zexiang; et al;Design of Main Drive with Short Chain for New Median Size Horizontal lathe[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1997-12
【Secondary Citations】
Chinese Journal Full-text Database 2 Hits
1 Zhong Kangmin Guo Peiquan Cong Lin(Dept.of Mechanical and Electronics Engineering)Wang Zichang(Association of Science and Technology of Zibo);RESEARCH ON SUPER - REINFORCEMENT CENTRIFUGAL MECHANISM[J];Journal of Jinan University;1997-02
2 Gao Zexiang; et al;Design of Main Drive with Short Chain for New Median Size Horizontal lathe[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1997-12
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved