Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Mechanical Engineering》 2011-07
Add to Favorite Get Latest Update

Contact-impact Analysis of Gear Transmission System

TANG Jinyuan 1,2 ZHOU Wei 1,2 CHEN Siyu 1,2(1.Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing of Ministry of Education,Central South University,Changsha 410083; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410083)  
A new concept of impact in gear meshing based on contact dynamics and physical model of gear drive is put forward.The phenomenon of contact/impact between the meshing tooth pair caused by the velocity difference at the meshing point is studied.The model of contact-impact of gear meshing is built,and the solution algorithm is given.The influences of different impact velocity and impact position on the resultant impact force,impact time and impact stress are analyzed,and the maximal impact forces at each impact position and each impact velocity are calculated and compared by using the analytical calculation equation,so as to verify the validity of the numerical calculation result.The research shows that both impact velocity and impact position have significant influences on the resultant impact force,impact time and impact stress.Besides,the distributions of the maximal stress points on the tooth surface during the impact process under different impact conditions are also given,thus providing reference for in-depth research of contact fatigue and accumulated fatigue.The calculation result shows that the maximal contact stress points concentrate in the nearby area of the middle of tooth breadth.
【Fund】: 国家重点基础研究发展计划(973计划 2011CB706800);; 国家自然科学基金(50875263)资助项目
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 9 Hits
1 Tian Fang (Department of Engineering, North China University of Technology, 100041. Beijing, China);Meshing Impacts of Gears with Double Circular-Arc Profile[J];Journal of North China University of Technology;1994-03
2 Tang Jinyuan; Xiao Limin (Mechanical Engineering Department);The Engagement Shock Velocity Calcutlation of Gear Top Modification[J];JOURNAL OF CHANGSHA RAILWAY UNIVERSITY;1995-01
3 SHAO Ren-ping,SUN Jin-cai, SHEN Yun-wen,JIA Pu-rong (Northwest Polytechnic University, Xi′an 710072);The Quantitative Prediction of Shock Noise from Gear Transmission[J];Mechanical Science and Technology;2001-03
4 WU Bao-lin1,YANG Su-jun1,YAO Jun-hong2 ( 1 Tianjin Polytechnic University,Tianjin 300160; 2 Dezhou Institute of Technology, Dezhou 253015);Theoretical Analysis on Meshing Impact of Involute Gears[J];Mechanical Science and Technology;2003-01
5 Tang Jinyuan(Dept.of Mechanical Eng.,Changsha Railway University);The analysis of engaging shock velocity at the under cut tip point of gear root[J];MACHINE DESIGN;1998-04
6 ZHOU Changjiang~1 TANG Jinyuan~2 ZHONG Zhihua~1 1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha 410082; 2.School of Mechanical and Electrical Engineering,Central South University,Changsha 410075;Corner Contact and Impact Friction of Gear Drive[J];Chinese Journal of Mechanical Engineering;2008-03
7 ZHU Caichao~1 TANG Qian~1 WANG Jiaxu~1 TAN Yonghu~2 (1.State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030;2.Department of Mechanical Engineering,Chongqing University of Science and Technology,Chongqing 400080);Dynamic Chcharacteristics of New Ring-reducer[J];Chinese Journal of Mechanical Engineering;2008-04
8 WANG Jianjun LI Qihan LI Runfang Dept of Jet Propulsion, Beijing University of Aeronautics and Astronautics Beijing 100083, China Chongqing University, Chongqing 400044, China;RESEARCH ADVANCES FOR NONLINEAR VIBRATION OF GEAR TRANSMISSION SYSTEMS[J];Advances In Mechanics;2005-01
9 TANG Jin-yuan1, LIU Xin1, DAI Jin1,2(1. School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;2. Hunan University of Technology, Zhuzhou 412000, China);STUDY ON CORNER CONTACT SHOCK OF GEAR TRANSMISSION BY ANSYS/LS-DYNA SOFTWARE[J];Journal of Vibration and Shock;2007-09
Chinese Journal Full-text Database 10 Hits
1 YAO Wen xi (Department of Mechanical Engineering,Beijing Institute of Machinery,Beijing 100085,China);THE STUDY OF MESH IMPACT IN THE TRANSMISSION OF MODIFIED SPUR GEAR[J];JOURNAL OF BEIJING INSTITUTE OF MACHINERY;2000-02
2 SHENG Guo-liang(Nanjing Research Institute of Electronics Technology,Nanjing 210013,China);Simulated Study on the Gear Gap Non-linear Dynamics Based on MATLAB[J];Electro-Mechanical Engineering;2008-05
3 LIN Teng-jiao,YANG Yan-ni,LI Run-fang,LI Ying-chao (State Key Laboratory of Mechanical Transmission,Chongqing Univercity,Chongqing 400030,P.R.China);Numerical simulation of the internal dynamic excitation of a spiral bevel gear transmission[J];Journal of Chongqing University;2009-06
4 ;Gear tip relief design based on engagement shock[J];ENGINEERING DESIGN;1998-01
5 BAI Hong-jin1,ZHANG Jin-mei1,YAO Jian-hao2(1.Jiaxing Vocational Technical College,Jiaxing Zhejiang 314036,China;2.Jiaxing Machinery Research Institute,Jiaxing Zhejiang 314001,China);Gear Noise Analysis and Noise Reduction Design[J];Equipment Manufacturing Technology;2010-01
6 ZHU Cai-chao,LUO Zhao-xia,LIU Ming-yong,XIAO Ning (State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,P.R.China);Analysis on new gyratory fixed-spindle cycloid drive[J];Journal of Chongqing University;2010-03
7 CHENG Ai-ming,ZHANG Chun-lin,ZHAO Zi-qiang(School of Mechenical Engineering,Beijing Institute of Technology,Beijing 100081,China);Inner Parallel Moving Gear System Vibration Period Characteristics Research Under Multi-Tooth Meshing Driving[J];Transactions of Beijing Institute of Technology;2010-04
8 SONG Yi-ming,LIU Cong,ZHANG Jun(School of Mechanical Engineering,Tianjin University,Tianjin 300072,P.R.China);Design and experimental validation of a novel double-ring-plate gear reducer[J];Journal of Chongqing University;2010-06
9 WANG Jian-jun,MAO Zhen-zhong,QING Li-wei,LI Qi-han(1.School of Jet Propulsion,Beijing University of Aeronautics and Astronautics,Beijing 100191,China;2.The State Key Laboratory of Mechanics Tansmission Chongqing University,Chongqing 400030,China.);Torsional vibration analysis of helicopter power transmission system by the multi-shaft transfer matrix method[J];Journal of Aerospace Power;2008-10
10 Han Xia1, Li Shujun2, Jin Zhongbo1, Wang Ming1 (1.College of Engineering, Heilongjiang August First Land Reclamation University, Daqing 163319; 2. School of Mechanical Engineering and Automation Northeastern University);On Gearing Theory with Constant Instantaneous Contact Ratio and Its Kinematic Parameters[J];Journal of Heilongjiang August First Land Reclamation University;2008-06
China Proceedings of conference Full-text Database 1 Hits
1 Li Guiyan Li Yinong (The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing, 400030);Influence of bearing stiffness and backlash on bifurcation and chaotic of spiral bevel gear transmission system[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Tang Jinyuan; Xiao Liming; Wen Weijun(Mcch. Eng. Dept., Changsha Railway University, Changsha, 410075);Transition Curve Composition Based on Preshaving Hob Cutting[J];JOURNAL OF CHANGSHA RAILWAY UNIVERSITY;1996-02
2 Tang Jinyuan et al;Numberal Analysis of Conjugate Curve Generated by Preshaving Hob Cutter Tip Land Angle[J];TOOL ENGINEERING;1995-11
3 ZHOU Chang-jiang~1,TANG Jin-yuan~(1,2),WU Yun-xin~(1,2)(1.School of Mechanical and Electrical Engineering,Central South University,Changsha 410075,China;2.State key Laboratory of Mechanical Transmission,chongqing university,chongqing 400030,China);Load-hist Evaluation of Stresses and Deflection of Spur Gear Teeth Based on Exact Model[J];Machine Design and Research;2004-03
4 WU Bao-lin1,YANG Su-jun1,YAO Jun-hong2 ( 1 Tianjin Polytechnic University,Tianjin 300160; 2 Dezhou Institute of Technology, Dezhou 253015);Theoretical Analysis on Meshing Impact of Involute Gears[J];Mechanical Science and Technology;2003-01
5 Wang Jianjun 1 Lu Mingwan Zhang Xiong Hong Tao Wu Renzhi ( 1 Tsinghua University,Peijing 100084);The Theory of Rattle Dynamics for Automotive Gearshift System[J];MECHANICAL SCIENCE AND TECHNOLOGY;1997-03
6 SHENG Yun, WU Bao-lin(School of Mechanical and Electronics Engineering, Tianjin Polytechnic University, Tianjin 300160, China);Calculation analysis on meshing impact in gear transmission[J];Journal of Machine Design;2005-07
8 Sun ZhiminShen YunwenWang Sanmin Li Hua ( Northwestern Polytechnical University);BIFURCATIONS AND CHAOS OF STAR GEAR SYSTEM[J];Chinese Journal of Mechanical Engineering;2001-12
9 Sun Tao Shen Yunwen Sun Zhimin (Northwestern Polytechnical University) Liu Jiyan (Tianjin Vocational Technical Teachers' College);STUDY ON NONLINEAR DYNAMIC BEHAVIOR OF PLANETARY GEAR TRAIN SOLUTION AND DYNAMIC BEHAVIOR ANALYSIS[J];Chinese Journal of Mechanical Engineering;2002-03
10 Wang Sanmin Shen Yunwen Dong Haijun (Northwestern Polytechnical University);NONLINEAR DYNAMICAL CHARACTERISTICS OF A SPIRAL BEVEL GEAR SYSTEM WITH BACKLASH AND TIME-VARYING STIFFNESS[J];Chinese Journal of Mechanical Engineering;2003-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved