Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Mechanical Engineering》 2014-11
Add to Favorite Get Latest Update

Methods and Research Progress of High Performance Manufacturing

GUO Dongming;SUN Yuwen;JiA Zhenyuan;Key Laboratory for Precision& Non-traditional Machining of Ministry of Education,Dalian University of Technology;  
With the rapid development of science and technology,high-end equipment and products are constantly emerging.However,the high-end performance of these equipment and products mainly depend on the absolute guarantee of a very large number of parts/elements/components/devices(called briefly as high performance parts).In this case,the performance,such as wave-transparent,seal,drag reduction or structural elasticity,is usually taken as the primary manufacturing goal of this type of high performance parts.Such parts not only use difficult-to-cut materials,their surfaces but also present the characteristics such as complex curved shape,ultra-high precision,micro-nano multi-scale compound structure and functional coating.Moreover,the primary performance parameters are coupled with the geometric parameters and physical parameters of these parts.As a result,it is rather difficult to achieve such precision(ultra-precision) requirements by using conventional techniques to machine and manufacture these high performance parts.From the point of view of the requirements and applications of high performance parts,the characteristics and its surface classification as well as corresponding connotations of parts are described.Then their research statuses,key issues and related theoretical foundation of four types of surfaces of high performance parts are discussed in detail.Finally,the feasible routes,breakthrough direction and future development trend are also expounded.It provides an effective reference and guidance for the establishment of high performance oriented machining principle,method and process technologies,and therefore it will be helpful for solving the issue of the precision manufacture of high performance parts.
【Fund】: 国家自然科学基金创新群体(51321004);; 国家重点基础研究发展计划(973计划 2011CB706800)资助项目
【CateGory Index】: TH16
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 LIU Shu tian, ZHENG Xin guang, CHENG Geng dong (State Key Laboratory of Structural Analysis of Industrial Equipment, Dept. of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China);MICROSTRUCTURE DESIGN OPTIMIZATION OF MATERIALS WITH SPECIFIC ELASTIC PROPERTIES[J];Acta Materiae Compositae Sinica;2001-02
2 Guo Dongming(Key Laboratory for Precision & Non-traditional Machining of Ministry of Education, Dalian University of Technology,Dalian,Liaoning 116024,China);Function-geometry integrated precision machining methods and technologies for high performance workpieces[J];Engineering Sciences;2011-10
3 Jun Yan Jiadong Deng Gengdong Cheng(State Key Lab of Structural Analysis for Industrial Equipment and Department of Engineering Mechanics,Dalian University of Technology,Dalian,116024);MULTI GEOMETRICAL SCALE OPTIMIZATION FOR POROUS STRUCTURE AND MATERIAL WITH MULTI-OBJECTIVE OF STRUCTURAL COMPLIANCE AND THERMAL DEFORMATION[J];Chinese Journal of Solid Mechanics;2011-02
4 LING Si-ying1,WANG Li-ding1,2,LI Ke-hong1,MA Yong1(1.Key Laboratory for Precision & Non-traditional and Micro System Machining of the Ministry of Education,Dalian University of Technology,Dalian 116023,China;2.Key Laboratory for Micro/Nano Technology and System of Liaoning Province,Dalian University of Technology,Dalian 116023,China);Ultra-precision gear-grinding processing based on class 1 master gear[J];Optics and Precision Engineering;2011-07
5 WU Zhi-li,ZHU Xiao-peng,LEI Ming-kai(Surface Engineering Laboratory,School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,Liaoning);Progress in Deposition Principle and Process Characteristics of High Power Pulse Magnetron Sputtering[J];China Surface Engineering;2012-05
6 Wu Dongjiang, Chen Yunxiao, Lu Weifeng, Ma Guangyi, Guo Yuquan, Guo Dongming (Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian 116024, China);Dilution Characters of Al_2O_3-13wt%TiO_2 Coating by Direct Laser Cladding on Titanium Alloy[J];Rare Metal Materials and Engineering;2012-12
7 SHEN Yan, CHEN Lin sen, ZHOU Wang, XIE Jian feng, WANG Zhen hua, LU Zhi wei (Institute of Information Optical Engineering, Soochow University, Suzhou, Jiangsu 215006, China);Efficient Grating Transferring System for Recombining Optically Variable Device[J];Chinese Journal of Lasers;2004-10
8 Guo Dongming Jia Zhenyuan Wang Xiaoming Kang Dechun Wang Liding Cheng Gengdong (Dalian University of Technology);DIGITAL CONCURRENT DESIGN AND MANUFACTURING(DCDM)METHODS FOR IDEAL FUNCTIONAL MATERIALS COMPONENTS(IFMC)[J];Chinese Journal of Mechanical Engineering;2001-05
9 Wang Li Lu Bingheng Ding Yucheng Liu Hongzhong (State Key Laboratory of Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049);ULTRA-PRECISION ALIGNMENT BASED ON DIFFERENTIAL MOIRE TECHNIQUE[J];Chinese Journal of Mechanical Engineering;2005-04
10 WANG Liding~(1,2) CHU Jinkui~(1,2) LIU Chong~(1,2) LUO Yi~2 (1.Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian 116023;2.Key Laboratory for Micro/Nano Technology and System of Liaoning Province,Dalian University of Technology,Dalian 116023);New Developments on Micro-nano Manufacture Technology in China[J];Chinese Journal of Mechanical Engineering;2008-11
Chinese Journal Full-text Database 10 Hits
1 REN Shan LI Shu(School of Aeronautic Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083 ,China);Topology Optimization Design for Microstructures of Cellular Materials[J];Journal of Anyang Institute of Technology;2008-02
2 Li Xianzhen,Liu Yuling,Zong Simiao,Zhang Wei,Jiang Yan(Institute of Microelectronics Technology and Materials,Hebei University of Technology,Tianjin 300130,China);Study on Effect Factors of Polishing Rate in the CMP Technology for Glass-Ceramics[J];Semiconductor Technology;2008-08
3 Zhou Shaolin1,2 ,Tang Xiaoping1 ,Hu Song1 ,Ma Ping1 ,Chen Wangfu1,2 ,Yang yong1,2 ,Yan wei1 (1. Institute of optics & electronics, Chinese Academy of Sciences, Chengdu 610209, China;2. Graduate School, Chinese Academy of Sciences, Beijing 100039, China);Overview of Alignment of Nanometer Lithography Techniques[J];Micronanoelectronic Technology;2008-04
4 Ma Ping,Hu Song,Zhou Shaolin,Xu Wenxiang (Institute of Optics and Electronics,Chinese Academy of Sciences,Chengdu 610209,China);Research on the Method of Interferometric-Spatial-Phase for the Alignment of Lithography[J];Micronanoelectronic Technology;2010-10
5 Farid Akhtar1,2), Shiju Guo1), Jawid Askari1), and Jianjun Tian1) 1) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 2) Department of Metallurgical and Materials Engineering, University of Engineering and Technology, Lahore, Pakistan;Sintering behavior, microstructure and properties of TiC-FeCr hard alloy[J];北京科技大学学报(英文版);2007-01
6 WANG Xin1,WU Yi1,LONG Fei1,2,ZOU Zhengguang1(1 Key Laboratory of New Processing Technology for Nonferrous Metals and Materials of Ministry of Education,Guilin University of Technology,Guilin 541004;2 State Key Laboratory of Materials Synthesis and Processing,Wuhan University of Technology,Wuhan 430070);Progress in Steel-bonded Cemented Carbide Based on Titanium Carbide[J];Materials Review;2007-08
7 JIANG Lian-hui~1,JIA Zhen-yuan~(*1),WANG Dong-xing~2(1.Key Lab.for Precis.& Non-tradit.Mach.Technol.of Minist.of Edu., Dalian Univ.of Technol.,Dalian 116024,China;2.School of Electromech.& Automobile Eng.,Yantai Univ.,Yantai 264005, China);Research on digital jetting forming system for ideal functional material components[J];Journal of Dalian University of Technology;2006-03
8 SUN Yu-jing1,2,SUN Jie1,2,LI Jian-feng1,2,HE Yong3 (1.School of Mechanical Engineering,ShanDong University,Jinan 250061,China 2.Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, Shandong University,Jinan 250061,China 3.CAC Chengdu Aircraft Industrial(Group) Co.,Ltd.,Chengdou 610092,China);Influence of machining parameter on surface roughness and dimensional error of Ti6Al4V thin-walled component[J];Materials Science and Engineering of Powder Metallurgy;2010-06
9 LIU Shutian~*,CAO Xianfan t of Engineering Mechanics, Dalian University of Technology,Dalian 116024, China);DESIGN OPTIMIZATION OF MATERIAL WITH ZERO THERMAL EXPANSION COEFFICIENTS AND DESIGN VERIFICATION WITH NUMERICALLY SIMULATED EXPERIMENTS[J];Acta Materiae Compositae Sinica;2005-01
10 WANG Bo,WANG Bin,CHENG Gengdong*(State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Dalian University of Technology,Dalian 116023,China);Multifunctional design of sandwich panels with Kagome-like cores[J];Acta Materiae Compositae Sinica;2007-03
China Proceedings of conference Full-text Database 6 Hits
1 ZHANG Weihong,GAO Tong(The Key Laboratory of Contemporary Design & Integrated Manufacturing Technology,Northwestern Polytechnical University,#552,Xi'an 710072)Corresponding author,E-mail:zhangwh@nwpu.edu.cn;Structural topology optimization of multiphase materials structure with mass constraint[A];[C];2010
2 Liu Yuandong Yin Yihui Hu Wenjun(Institute of Systems Engineering,CAEP,Mianyang,Sichuan 621900);Multi-Objective Topology Optimization for Microstructure of Periodic Composite Material[A];[C];2010
3 ;From Macro to Micro:Research Progress on Micro-nano Manufacturing Technology[A];[C];2009
4 CHEN Qiuyang, ZENG Min, ZHANG Dongjie, YANG Man, WANG Qiuwang (State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049);Current status and development of high temperature heat exchangers[A];[C];2006
5 Guo Dongming Yang Rui Jia Zhenyuan Wang Xiaoming Dalian University of Technology;An Adaptive Slicing Algorithm for Layered Manufacturing of Ideal Functional Material Components (IFMC)[A];[C];2001
6 Wang Yufeng,Zeng Yongbin,Qu Ningsong,Wu Xiujuan,Zhu Di (Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China);Micro and Nano Probe Fabrication Based on Electrochemical Machining[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 MEI Nian song,HUANG Qing an (Key Laboratory of MEMS of Education Ministry,Southeast University,Nanjing210096,China);A new structure for measuring MEMS films fracture strength——thermal actuator[J];Micronanoelectronic Technology;2003-Z1
2 Lei Xiaofeng,Liu Zewen,Xuan Yun,Wei Jia,Li Zhijian,and Liu Litian(Institute of Microelectronics,Tsinghua University,Beijing 100084,China);Design and Fabrication of K-Band Double Bridge Capacitive MEMS Switches[J];Chinese Journal of Semiconductors;2005-07
3 GAO Hang,YUAN He-ping(Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology,Dalian 116024,Liaoning,China);Development of a Wheel for Dry Grinding of CFRP Parts and Investigation on Its Machining Performance[J];Acta Armamentarii;2011-02
4 Liu Bingshan Yan Ying (School of Aeronautics Science and Technology, Beijing University of Aeronautics and Astronautics, Beijing 100083, China) Qian Wei (Shenyang Aircraft Design Research Institute, Shenyang 110035, China) Duan Yuexin (School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Design, modal analysis and tests of composites wing box[J];Journal of Beijing University of Aeronautics and Astronautics;2003-11
5 Lü Bin Liu Deguang Xie Changchuan Yang Chao(School of Aeronautic Science and Technology,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Optimization designing method of wing flutter model for low-speed wind tunnel test[J];Journal of Beijing University of Aeronautics and Astronautics;2006-02
6 Changqing Xia, Xiaomin Peng, and Jia Li School of Materials Science and Engineering, Central South University, Changsha 410083, China;Behavior of NiCrAlY coating on the TC6 titanium alloy[J];北京科技大学学报(英文版);2008-02
7 CHEN Xue-meng,LI Xin-xin,SONG Zhao-hui,WANG Yue-lin, HUANG Hui,HUANG Shu-sen,ZHANG KunState Key Lab of Transducer Technology,Shanghai Institute of Microsystem and Information Technology,Chinese Aacademy of Sciences,Shanghai 200050,China;A New Structure Silicon Piezoresistive Micromachined Accelerometer[J];Journal of Transcluction Technology;2005-03
8 YIN Gang-yi(Key Laboratory of MEMS of Education Ministry,Microelectronics Center,Southeast University,Nanjing 210096,China);Systematic Application of IP Library of MEMS Devices[J];Journal of Transcluction Technology;2005-04
9 ZHOU Jian-fa, ZHAO Yu-long, YUAN Guo-ying, JIANG Zhuang-de 1. Institute of Precision Engineering, Xi’an Jiaotong University, Xi’an 710049, China; 2. State Key Lab of Mechanical Manufacturing System, Xi’an 710049, China;Micro Silicon Multi-Function Integrated Sensor[J];Chinese Journal of Sensors and Actuators;2006-02
10 ZHANG Cheng-liang,MA Bing-he,CHANG Hong-long,YUAN Wei-zheng (Micro and Nano Electromechanical Systems Laboratory, Northwestern Polytechnical University, Xi’an 710072, China);Modeling of Capacitive Micro Pressure Sensor Featuring Space-Continuous Behavior[J];Chinese Journal of Sensors and Actuators;2006-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved