Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《MIE of China》 2007-01
Add to Favorite Get Latest Update

The System of Design and Virtual Assembly for Parameterized Gears Based on UG NX4.0

ZHENG Jin-xing, WEN Bing(Harbin Engineering University, Heilongjiang Harbin, 150001, China)  
Based on Unigraphics software it develops a gears design system used for modeling and virtual assembly. This system can calculate the geometry parameters of gears, build up the parametric model with UG/Open Grip, and implemente user interface with UG/UIStypler. Then virtual assembly for designed gears are carried out in order to improve gears design efficiency further.
【CateGory Index】: TP391.72
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 LU Yong-jian,WU Li-mei,REN Jing(Shenyang Institute of Aeronautical Engineering,Liaoning Shenyang,110136,China);Parametric Design of the Involute Gear Based on UG/Open[J];Manufacture Information Engineering of China;2010-03
2 Qu Wentao, Dai Yonghui, Li Xiaojun, et al.(School of Mechanical Engineering, Xi’an Shiyou University, Xi’an);Modeling by parameters of ESPCP special coupling based on UG[J];China Petroleum Machinery;2008-10
Chinese Journal Full-text Database 4 Hits
1 Fan Xiaogang, Xu Furen, Sui Peng , et al (College of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093);Modeling by Parameters Based on Gear Numbers of Involute Gear[J];Aviation Precision Manufacturing Technology;2005-01
2 Zhou Xueliang ,Ruan Jingkui (Dept.of Mechanical Engineering,Hubei Automotive Industries Institute,Shiyan442002,China);Parametric Model of Gear Based on UG/Open[J];Journal of Hubei Automotive Industries Institute;2004-02
3 MENG Guang-jun,ZHANG Ming,WANG An-min (Qingdao University of Science &Technology Shandong Qigdao 266042,China);THE METHODS OF USER INTERFACE DEVELOPMENT BASE ON UG[J];Machinery;2004-05
4 CHENG Chen;Analysis of Several Problems in Development Based on UG[J];Modern Machinery;2005-03
Chinese Journal Full-text Database 10 Hits
1 Wang Dadong(Qinhuangdao hub Co.,Ltd.,Qinhuangdao,066004);Research on Secondary Development of Glassware Pressing Machine Based on UG/Open GRIP[J];Glass;2010-07
2 YAO Jin, DU Hong wei (Sichuan University, Chengdu 610065,China);Development of 3D parameter packing case CAD system[J];Packaging Engineering;2001-06
3 ZHU De- quan1,ZHU De- wen2,ZHOU Jie- min1,SHAO Lu- shou1,LI Bing1(1. College of Engineering, Anhui Agricultural University, Hefei 230036, China; 2. Nanjing Research Institute for Agricultural Mechanization, Nanjin 210014, China);The Application of UG Developing Technology in Designing the Die CAD system[J];Packaging and Food Machinery;2005-02
4 LAI Tian-qin1,ZHONG Lin-yuan,LUO Wei2(1. HangZhou Wahaha Group Ltd,Hangzhou 310018,China; 2.UG Software,Shanghai 200336,China);Cam Machining of High Speed Rotary Capper[J];Packaging and Food Machinery;2010-03
5 ZHANG Sheng-wen1, ZHANG Liang1, FANG Xi-feng1, JIA Wei2 (1. Modern Manufacturing Technology Institute, Jiangsu University of Science and Technology, Zhenjiang 212003, China; 2. Machinery Manufacturing Institute, Hudong Heavy Machinery Co. LTD., Shanghai 200129, China);NC programming system based on KBE for complex components of diesel engines[J];Ship Engineering;2008-01
6 HU Yue-hua WU Ze-bing LI Jia-jin(Southwest Petroleum University,Chengdou 610500);Bit Cone Three-Dimensional Entity Configuration Based On UG/OPEN GRIP[J];Journal of Yangtze University(Natural Science Edition) Sci & Eng V;2008-01
7 CHENG Xue-peng,HAO Bo(College of Mechanical Engineering,Shenyang LigongUniversity,Shenyang 110159,China);The Parametric Design of Revolving Roll Picker Based on UG[J];Group Technology & Production Modernization;2011-02
8 Chen Koujie,Shan Yan(Zhejiang University,Hangzhou 310027,China);The Development of EDM Electrode Aided Design and Simulation System[J];Electromachining & Mould;2010-02
9 Xiang Xiaoli,Zhao Wansheng,Gu Lin(Shanghai Jiao Tong University,Shanghai 200240,China);CAD/CAM Software Development and Rapid-tooling of Bundled Electrode for EDM[J];Electromachining & Mould;2012-03
10 LIANG Hui-min~1, WANG Qi-ya~1, ZHAI Guo-fu~1, CUI Li~2, WANG Li-zhong~2(1.Military Electrical Apparatus Research Institute, Harbin Institute of Technology, Harbin 150001, China; 2.G & A Technologies Co. Ltd., Guilin 541002, China);Development of CAD System for Military Hermetic Electromagnetic Relay[J];Low Voltage Apparatus;2006-07
China Proceedings of conference Full-text Database 3 Hits
1 Wu XianWen (Sichuan Engineering Technical College,Sichuan Deyang 618000);The Research of Numerical Control Machining Technology in Pressure Vessel Compound Profile Faces Based on UG[A];[C];2008
2 ZHUANG Su-Tao~1,MENG Xiao-jun~2 (Taishan University,Shandong Tai'an 271021,China);Based on symmetric equation of involutes' spur gear UG Parametric Modeling[A];[C];2010
3 Li Dan Jin Can Liu Xiao-ping VCC Division,School of Computer and Information,Hefei University of Technology,Hefei,230009,China;Research on Model Format Exchange between UG and ANSYS[A];[C];2009
Chinese Journal Full-text Database 10 Hits
1 WANG Chao,QIN Wen-jie (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology,Beijing 100081,China);Finite Element Analysis for 3-D Dynamic Contact problem of Gear Tooth[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2004-02
2 XIAO Wangqiang, LI Wei, Han Jianyou, Duan MingnanMechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Transmission contact analysis of the unsymmetric gear with double pressure angles[J];Journal of University of Science and Technology Beijing;2006-12
3 LU Kai-jiang,YANG Feng (Dept.Mechanical & Elect.Engn.,Baoji Coll.Arts & Sci.,Baoji 721007,Shaanxi,China);Caculation of principle error of involute profile processed by Archimedean hobbing cutter[J];Journal of Baoji College of Arts and Science(Natural Science Edition);2002-04
4 Zhan Yiting Liu Yindong;Creation of 3-D curved hull surface model and software programming[J];Ship & Boat;2006-03
5 (He Xiong,School of Mechanical Engineering,SJTU);The Analysis on Adams Dynamic Simulation Algorithm and Parameters Selection[J];;2005-03
6 Tang Jinyuan ;Xiao Liming (Mechanical Engineering Department);The Solution of Helical Gear Normal Tooth Profile[J];JOURNAL OF CHANGSHA RAILWAY UNIVERSITY;1995-03
7 SANG Nan BAI Yu(School of Applied Technology,Changzhou Institute of Technology,Changzhou 213002);A Parametric Design and Simulation of Gear Mechanism[J];Journal of Changzhou Institute of Technology;2006-03
8 YU Zhi-lin(Computer Center,Shanghai University,Shanghai 200444,China);Parameterized Modeling System of Gear Based on UG[J];Journal of Donghua University(Natural Science);2008-03
9 LI Chao,AI Li-kun,LIU Yan-feng,GU Wen-ting(College of Petrochemical Technology,Lanzhou University of Technology,Lanzhou 730050,China);Dynamic Modal Analysis of High-speed Rotary Turbo-expander Impeller with Finite Element Method[J];Journal of Chinese Society of Power Engineering;2010-03
10 Zhang Liping,Yu Suoqing,Ni Liyong;The Numerical Simulation of the Upsetting-extruding Process Stress Field for the Heavy Disk Forgings[J];Heavy Castings and Forgings;2007-01
【Secondary References】
Chinese Journal Full-text Database 4 Hits
1 ZUO Jian-Min1,2,HE Chuan1,LI Xiao-Xia1,WANG Hui1(1.Changzhou University,Changzhou Jiangsu 213016,China; 2.Jiangsu Teachers University of Technology,Changzhou Jiangsu 213001,China);Parametric Design of Involute Straight Gear Based on Visual C++[J];Development & Innovation of Machinery & Electrical Products;2011-01
2 WANG Wei;XU Cai-Yun;Minnan University of Science and Technology;;Parametric Design of Involute Helical Gear Base on Pro/E[J];Development & Innovation of Machinery & Electrical Products;2014-06
3 JIANG Wei-xu1,2,HOU Li1,2,ZHANG Jian-quan1,2,ZHANG Qi1,2,LIU Song1,2(1.College of Manufacturing Science and Engineering,Sichuan University,Chengdu 610065,China;2.Mechanical Transmission of State Key Laboratory,Chongqing University,Chongqing 400044,China);The Feature Modeling of Gear with Curvilinear-tooth Based on UG[J];Modular Machine Tool & Automatic Manufacturing Technique;2010-12
4 Xu Lina;Liu Haihua;Zhao Xian;The Vehicle Engineering Department of Baotou Vocational & Technical College;The Transportation Equipment Department of Baotou Iron and Steel Group Company;The Transportation Machine Department of Baotou Iron and Steel Group Company;;Research of the parametric design of involute gear on NX platform[J];Modern Manufacturing Engineering;2014-07
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 SUN Jiang hong (Beijing Institute of Machinery,Beijing 100085);General Technique of Parametric Design for Spur Gear with UG[J];Mechanical Science and Technology;2002-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved