Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Building Structures》 2002-01
Add to Favorite Get Latest Update

Local Interactive Bucking and Distortional Buckling of Lipped Channels

CHEN Shaofan(Xi'an University of Architecture and Technology, Xi'an 710055, China)  
For cold formed lipped channels, there are not only interaction between buckling of plate elements, but also two different modes of local buckling, namely the local buckling in common sense and the distortional buckling. Although each of these two modes has its own peculiarity in performance, it is feasible to combine them together in routine design work. It is shown in this article that, in case where a buckling coefficient of 3.0 is adopted for the lipped flange and the lip width is adequate, the distortional buckling will not prevail in the design and can then be merged into local buckling calculation. The suggested approach correlates well with the published test data from three different sources.
【CateGory Index】: TU511.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 YE Qian,YAO Jian Department of Civil Engineering, Zhejiang University, Hangzhou 310027,China; FINITE ELEMENT ANALYSIS OF DISTORTIONAL BUCKLING OF COLD-FORMED CHANNEL COLUMN[J];Low Temperature Architecture Technology;2006-01
2 Ren Yuefen1 Ye Zhiming1,2 (1.Department of Civil Engineering, Shanghai University Shanghai 200072,China;2.Shanghai Institute of Applied Mathematics and Mechanics, Shanghai 200072,China);Influence on section parameters for the buckling behaviors of cold-formed channel sections[J];Housing Materials & Applications;2005-01
3 YAO Jian1 , TENG Jin-guang2 (1. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China; 2. Department of Civil and Structural Engineering, the Hong Kong Polytechnic University, Hong Kong, China);WEB ROTATIONAL RESTRAINT IN ELASTIC DISTORTIONAL BUCKLING OF COLD-FORMED LIPPED CHANNEL SECTIONS[J];Engineering Mechanics;2008-04
4 YAO Jian (Institute of Structural Engineering, Zhejiang University, Hangzhou 310027, China);DISTORTIONAL BUCKLING LOADS OF COLD-FORMED LIPPED CHANNELS[J];Engineering Mechanics;2008-12
5 WANG Chun-gang1,2 , ZHANG Yao-chun1 (1. School of Civil Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150090, China; 2. Civil Engineering College, Shenyang Jianzhu University, Shenyang, Liaoning 110168, China);DIRECT STRENGTH-METHOD STUDY ON ULTIMATE LOAD-CARRYING CAPACITY OF ECCENTRICALLY LOADED LIPPED CHANNELS[J];Engineering Mechanics;2009-02
6 Shen Hongxia (School of Civil Engineering, Xi′an University of Architecture & Technology Xi′an 710055);BUCKLING COEFFICIENTS TAKING INTO ACCOUNT CONSTRAINT ACTIONS BETWEEN PLATE ELEMENTS OF LIPPED CHANNEL STRUTS[J];Steel Construction;2006-01
7 Jiang Lu He Baokang Zhang Wei(Xi'an University of Architecture and Technology Xi'an 710055);REVIEW AND ANALYSIS OF EXPERIMENTAL AND THEORETICAL RESEARCHES ON DISTORTIONAL BUCKLING OF COLD-FORMED THIN-WALLED STEEL MEMBERS[J];Steel Construction;2006-05
8 Wu Jinqiu Tong Genshu(Dept.of Civil Engineering,Zhejiang University Hangzhou 310027);LOCAL AND DISTORTIONAL BUCKLINGS OF DIFFERENT INCLINED LIPPED PURLINS[J];Steel Construction;2006-05
9 Jiang Lu He Baokang Ma Rongkui Yang Songling(School of Civil Engineering,Xi'an University of Architecture and Technology,Xi'an 710055);COMPARISON AND ANALYSIS OF LIPPED CHANNEL FLEXURAL MEMBERS' CAPACITY CALCULATED BY SPECIFICATION NAS 2004 AND GB 50018-2002[J];Industrial Construction;2007-06
10 Wei Xiaoli Yu Shaofeng(Department of Civil Engineering,Tongji University Shanghai 200092);STRUCTURAL ANALYSIS OF STEEL STORAGE RACKS[J];Industrial Construction;2008-S1
China Proceedings of conference Full-text Database 1 Hits
1 ZHAN Guan-yuan XIAO Ya-ming (School of Civil Engineering, Hefei University of Technology, Hefei 230009, China);Calculating methods and application of load-carrying capacity for cold-formed lipped channels[A];[C];2008
【Citations】
Chinese Journal Full-text Database 1 Hits
1 Chen Jian; Gu Qiang; Chen Shaofan(Shenzhen Central Institute of Architectural Design, Shenzhen, 518028)Dept. of Cons. Eng., Xi'an Univ. of Arch. & Tech.,Xi'an, 710055);Interaction of local buckling and effective width of the compression flange in lipped channels under bending (Ⅰ)[J];JOURNAL OF XI'AN UNIVERSITY OF ARCHITECTURE &TECHNOLOGY;1996-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIANG Yuan sen 1,XU Jian she 1,WANG Bu 1,LI Ying qing 2 (1.Department of Structural and Building Engineering,Tongji University,Shanghai 200092,China; 2.The City Construction Committee of Zhengzhou,Zhengzhou 450052,China);The problem of plastic overdeformation on the use of the plastic behavior of the flexural member in steel structure[J];Building Science Research of Sichuan;2003-01
2 LU Lin-feng~1,GU Qiang~2,SU Ming-zhou~3,SHEN Lin~4,HU Tian-bing~4(1.Chang'an University,Xi'an 710061,China; 2.Suzhou University of Science and Technology,Suzhou 215011,China;3.Xi'an University of Architecture and Technology,Xi'an 710055,China;4.Chinese Institute of Building Standard Design & Research,Beijing 100044,China);Staggered truss joints design method[J];Building Science Research of Sichuan;2005-05
3 LU Lin-feng(Schooll of Civil Engineering,Chang'an University,Xi'an 710061,China);Influence of swing columns on second-order effect of portal frame[J];Sichuan Building Science;2006-04
4 WANG Wanzhen1,SUN Yuping1,GU Qiang2(1.College of Civil Engineering,Lanzhou University of Technology,Lanzhou 730050,China;2.Department of Civil Engineering,Suzhou University of Science & Technology,Suzhou 215011,China);Comparatively study on various crack formation criteria of ductile material[J];Sichuan Building Science;2008-03
5 Xia Weiming(Huainan Coal Mining Industry,Huainan 232000,China);Approach to Stability Design of Steel Structure[J];Anhui Architecture;2008-03
6 ZHANG De-chen,SUN Yan-ping(School of Mechanical Eninering and Automation,Anshan University of Science and Technology,Anshan 114044,China);Research on MIC-120 Metal Arched Ripple Roof[J];Journal of Anshan Institute of Iron and Steel Technology;2002-05
7 LU Fang wei, ZHOU Chuan bo, WU Zhen zhi (China University of Geosciences, Wuhan Hubei 430074, China);Demolition of A Combined Structure by Controlled Blasting[J];Blasting;2003-01
8 WAN Xin~1,LEI Jun~2,ZHAO Gen-tian~(1,3),LIN Ju~4(1.Architecture and Civil Engineering School,UST Inner Mongolia,Baotou 014010,China;2.Equipment-Force Department,Baotou Iron and Steel(Group)Co.,Baotou 014010,China;3.Civil Engineering Department,Shanghai University,Shanghai 200072,China;4.The Purchase Department of Baotou Government,Baotou 014010,China);Strengthening and reforming of one-story steel-structure factory structural system[J];Journal of Baotou University of Iron and Steel Technology;2003-03
9 ZHU Tong~1,CHEN Ming~2,ZHAO Gen-tian~2 (1.Baotou Engineering and Research Corporation of Iron and Steel Industry,Baotou 014010,China;2.Architecture and Civil Engineering School,UST Inner Mongolia,Baotou 014010,China);Experimental study of tapering columns subjected axial load[J];Journal of Baotou University of Iron and Steel Technology;2005-01
10 QI Yong_sheng (Department of Civil Architecture,Changzhou Institute of Technology, Changzhou 213002);The Research of Tension Problem of Column Roots in Tapered Portal Frames with Simple Column Bases[J];Journal of Changzhou Institute of Technology;2003-02
China Proceedings of conference Full-text Database 4 Hits
1 Zhao Chengwen, Yan ShuangYue, Fan Jin (Civil Engineering Institute of Shenyang Jianzhu University, Shenyang 110168, China);Second-order Effect of Plane Frames Considering Linear Stiffness Ratio of Beam- column[A];[C];2006
2 Zhang Nan Xia He (School of Civil Engineering,Beijing Jiaotong University,Beijing 100044);Reform on Engineering Vibration and Stability Course Referring the Experience of MIT[A];[C];2009
3 Hong Xiaoyong,Wu Weiqing,Li Lishu (East China Architectural Design & Research Institute Co.,Ltd.,Shanghai 200002,China);Structural Design of High-rise Fortune Office Building in Gubei Region[A];[C];2009
4 Wang Hua,Xu Huifang,Chen Dong,Ge Wen (East China Architectural Design & Research Institute Co.,Ltd.,Shanghai 200002,China);Structure Design of the Northern Podiums in Orient Gate[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 ZENG Xiaoming1,JIANG Yaohua2(1.China Machinery International Engineering Design & Research Institute, Changsha 410007,China;2.Changsha University of Science and Technology,Changsha 410076,China);Experimental research on lipped channel columns and lipped angle columns[J];Sichuan Building Science;2007-02
2 QING Weijie ;YANG Quan(Mechanical Engineering School, UST Beijing, Beijing, 100083, China);Study on the Cold Rolled Strip Global and Local Buckling, Post-buckling Using the Finite Element Method[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-04
3 HAN Lin-hai, TAO Zhong (Institute of Civil Engineering and Architecture, Fuzhou University, Fuzhou 350002);Ductility coefficient of concrete filled steel tubular columns with square sections[J];Earthquake Engineering and Engineering Vibration;2000-04
4 LI Ying-bin LIU Bo-quan SHI Qing-xuan (1. Xi'an University of Architecture & Technology. Xi'an 710055. China; 2. Chang'an University, Xi'an 710064, China);Research and development of performance-based seismic design theory[J];Earthquake Engineering and Engineering Vibration;2001-04
5 LI Guoqiang1,ZHAO Xin1,SUN Feifei1,GAO Wenli2,YANG Zunquan2,JIN Shiwen2(1.Tongji University,Shanghai 200092;2.Shandong Alpha Building Technology Corporate,Laiwu 271100);Shaking table study on a full scale model of wall panels and their connections of steel frame residential building systems[J];Earthquake Engineering and Engineering Vibration;2003-01
6 QU Chengzhong, XIE Lili(Institute of Engineering Mechanics, China Seismological Bureau, Harbin 150080,China);Study on the method for determining target displacement of block masonry structures under near collapse performance level[J];Earthquake Engineering and Engineering Vibration;2003-02
7 REN Jun~(1), TENG Jun~(2), YE Lie-ping~(1)(1.Shenzhen Graduate School, TsingHua University, Shenzhen 518057, China; 2.ShenzhenGraduate School, Harbin Institute of Technology, Shenzhen 518057, China);Research on vibration control of hybrid mass damper for Diwang Tower under wind loading[J];Earthquake Engineering and Engineering Vibration;2003-06
8 Lu Fei Cheng Wenrang Li Aiqun (The Key Lab of R.C. & P. C. Structures of Ministry of Education, Southeast University, Nanjing 210096, China);Research of implementation of active control engineering for Nanjing TV tower[J];Journal of Southeast Univwrsity(Natural Science Edition);2002-05
9 Zheng Hong 1,2 Yu Maohong 1 ( 1School of Construction and Mechanics, Xi'an Jiaotong University, Xi'an 710049, China) ( 2School of Construction Engineering, Chang'an University, Xi'an 710061, China);Effects of the plates width-thickness ratios on cyclic characteristics of I-section steel beam-columns[J];Journal of Southeast University (Natural Science Edition);2003-04
10 Zhang Zhiqiang1 Li Aiqun1 Jia Hong2 He Jianping3 Wang Jianlei3(1School of Civil Engineering,Southeast University,Nanjing 210096,China)(2Zhongtie Construction Group Co.Ltd,Beijing 100040,China)(3Design Institute,State Administration of Radio Film and TV,Beijing 100045,China);Wind-induced vibration control of TV tower with fluid viscous damper[J];Journal of Southeast University(Natural Science Edition);2007-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 DONG Jun1,LU Xi2 (1.Research Institute of Steel Structures,Nanjing University of Technology,Nanjing 210009,China;2.China Triumph International Engineering Co.,Ltd.Nanjing 210042,China);Nonlinear simulation for hysteretic behavior of C steel members with intermediate stiffeners under constant compression and cyclic bending[J];Journal of Earthquake Engineering and Engineering Vibration;2008-06
2 SUN Mi,WANG Guang,YAO Jian (Institute of Structural Engineering,Zhejiang University,Hangzhou 310027,China);ELASTIC DISTORTIONAL BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMN WITH DIAPHRAGMS[J];Low Temperature Architecture Technology;2008-04
3 ZHENG Jian-can,YAO Jian (Institute of Structural Engineering,Zhejiang University,Hangzhou 310027,China);REINFORCING AND FINITE ELEMENT ANALYSIS TO DISTORTIONAL BUCKLING OF COLD-FORMED CHANNEL BEAMS[J];Low Temperature Architecture Technology;2008-05
4 LUO Hong-guang,MA Shi-cheng(Department of architectural engineering,Xiangtan university,Xiangtan 411105,China);Analysis of Lipped Channel F lexural Members'coefficients of Constraint Action Between Plate Components in Distortional Buckling mode by Direct Strength Mmethod[J];Construction & Design for Project;2008-01
5 YAO Jian1 , TENG Jin-guang2 (1. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China; 2. Department of Civil and Structural Engineering, the Hong Kong Polytechnic University, Hong Kong, China);WEB ROTATIONAL RESTRAINT IN ELASTIC DISTORTIONAL BUCKLING OF COLD-FORMED LIPPED CHANNEL SECTIONS[J];Engineering Mechanics;2008-04
6 YAO Jian (Institute of Structural Engineering, Zhejiang University, Hangzhou 310027, China);DISTORTIONAL BUCKLING LOADS OF COLD-FORMED LIPPED CHANNELS[J];Engineering Mechanics;2008-12
7 WANG Chun-gang1,2 , ZHANG Yao-chun1 (1. School of Civil Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150090, China; 2. Civil Engineering College, Shenyang Jianzhu University, Shenyang, Liaoning 110168, China);DIRECT STRENGTH-METHOD STUDY ON ULTIMATE LOAD-CARRYING CAPACITY OF ECCENTRICALLY LOADED LIPPED CHANNELS[J];Engineering Mechanics;2009-02
8 Tian Wei Guo Chengxi (School of Civil Engineering,Xi′an University of Architecture and Technology Xi′an 710055);STUDY ON COLD-FORMED STEEL UNLIPPED CHANNELS SUBJECTED TO WEB CRIPPLING[J];Steel Construction;2005-06
9 Luo Hongguang Ma Shicheng (Department of Architectural Engineering,Xiangtan University Xiangtan 411105);CALCULATION OF LIPPED CHANNEL FLEXURAL MEMBERS’COEFFICIENTS OF CONSTRAINT ACTION BETWEEN PLATE COMPONENTS IN DISTORTIONAL BUCKLING MODE BY DIRECT STRENGTH METHOD[J];Steel Construction;2008-02
10 Shi Sanyuan Yan Falin (School of Civil Engineering, Hebei University of Engineering Handan 056038);PREVENTING MEASURES OF THE DISTORTIONAL BUCKLING OF COLD-FORMED THIN-WALLED C STEEL[J];Steel Construction;2008-10
China Proceedings of conference Full-text Database 2 Hits
1 Chen Ji (Xian University of Architecture & Technology Xian 710055);Distortional Buckling Strength and Interaction Capacity of Compression Cold-Formed Lipped Channels[A];[C];2008
2 HUA YANG~1 LI SONG~2 1.School of Civil Engineering,Harbin Institute of Technology,Harbin 150090,China; 2.Harbin office of material revolution and energy conservation of building walls,Harbin 150000,China;Heat transferring performance of light gauge steel panels[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 Chen Shaofan; Xui Ying(Dept. of Cons. Eng.,Xi'an Univ. of Arch. & Tech., Xi'an China, 710055);Interaction of local buckling in cold-formed members and effective width of edge-stiffened elements[J];JOURNAL OF XI'AN UNIVERSITY OF ARCHITECTURE &TECHNOLOGY;1995-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved