Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《ADVANCES IN MECHANICS》 1996-04
Add to Favorite Get Latest Update

CAE SYSTEM FOR SHEET FORMING

Huo Tongru; Xu Bingye (Tsinghua University, Beijing 100084)  
The sheet forming is complicated due to the simultaneous existence of high order nonlinearities of geometry, materials, contact and friction. A CAE system composed of the finite element simulation and computer graphics can be established to investigate this complicated processes of sheet forming. Useful information can be obtained for the dersign and manufacturing of the sheet forming. The components of the CAB system, the finite element algorithms and the methods for the simulation of contact, friction, draw bead and springback are discussed in this paper.
【CateGory Index】: TG302
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 ZHU Xiling(College of Mechanical Engineering,Shanghai University of Engineering Science,Shanghai 201620,China);Rolling Force Calculation in Thin Sheet Rolling Process[J];上海工程技术大学学报;2013-02
2 XIE Hui1,CHEN Yake1,PAN Xin2,WANG Chenlei1(1.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha 410082,China;2.China Machinery Industry Federation,Beijing 100823,China);Research on Compensation of Springback and Simulation Based on Stamping Forming Full Cycle[J];热加工工艺;2013-01
3 GUO Lei,JIA Weiping,DU Kun,WANG Shaojie(Liaoning Key Laboratory of Material Formation and Microstructure Property Control, University of Science and Technology Liaoning,Anshan 114051,China);Analysis of influence factors on springback of U-shaped parts of AM50A magnesium alloy[J];辽宁科技大学学报;2012-04
4 YANG Xiangan1,2,RUAN Feng2(1.Key Laboratory of Numerical Control Technology of Guangdong Higher Education Institute,Guangdong Polytechnic Normal University,Guangzhou 510643,China;2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China);Study on Constraint Points in Springback Simulation for Complex Shape Panel[J];热加工工艺;2011-05
5 ZHAO Xia1,LI Yankui2,KANG Cheng2(1.College of Vocation and Technology,Liaoning Shihua University,Fushun 113001,China;2.Xiaonan Mine,Tiefa Coal Industry Group Co.,Ltd.,Diaobingshan 112700,China);Study of Common Quality Problem and Influencing Factors of Auto Covering Parts[J];热加工工艺;2010-15
6 DENG Zhaohu, ZHANG Zujun, HU Weicai, RUAN Feng (School of Mechanical Engineering South China University of Technology,Guangzhou 510641,Guangdong China);The Springback Analysis and Numerical Simulation of Metal Sheet in Curling[J];锻压装备与制造技术;2008-01
7 YANG Zheng-yu1,2,CHANG Si-qin1(1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China;2.Advanced CNC Techniques Central Laboratory of Province Jiangsu,Nanjing Institute of Technology,Nanjing 211167,China);Study on Numerical Simulation of Springback in Automobile Panels Forming[J];拖拉机与农用运输车;2007-06
8 GUO Yu-qin 1,2,JIANG Hong 1,WANG Xiao-chun 1 (1.Mechanical Engineering Institute,Xi’an Jiaotong University,Xi’an 710049,China;2.Department of Mechanical Engineering,College of Technology,Xuzhou Normal University,Xuzhou 221011,China);Study on Springback Prediction in Automotive Panels Forming Processing[J];机床与液压;2005-03
9 YU Guo-qing, LU Shi-hong(Nanjing University Of Aeronautics And Astronautics, Nanjing, Jiangsu 210016, China);Research on the Factors Affecting the Simulationof the Springback of Sheet Metal Bending[J];模具工业;2004-12
10 LIU Yan-fang SHI Fa-zhong (School of Mechanical Engineering & Automation, BeiHang University);Study on finte element numerical simulation of springback in sheet metal stamping forming[J];锻压技术;2004-04
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 CHENG Cheng,HU Jianhua,SHANG Huisen,LI Ming(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China);Springback in Sheet Metal Stamping and Its Solutions[J];热加工工艺;2011-11
2 ZHANG Yang(School of Material Science and Engineering,Xi'an Jiaotong University,Xi'an 710049 China)ZANG Shun-lai DING Ri-xian GUO Cheng(School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049 China);Study of the influence of element size and number of integration points on accuracy of sheet springback prediction[J];塑性工程学报;2010-05
3 ZHANG Xu,ZHOU Jie(College of Mechanical Engineering,Chongqing University,Chongqing 400044,China);Optimization and Springback Control of Rear Bumper Forming Process[J];热加工工艺;2010-05
4 WU Xiang-nan ZHANG Kao-min REN Zhao-kun MI Xin-lan(Material Engineering Department,North China Institute of Aerospace Engineering,Langfang 065000,China);Calculation on Single Fiber in Plane Flow Filed Based on Lagrangian Coordinate Method[J];北华航天工业学院学报;2010-01
5 ZHOU Jie MO An-jun LI Hui XU Yang(College of Material Science and Engineering of Chong Qing University,Chongqing 400044 China)YANG Ming(Push Die&Mould Co.LTD.Wu Liangye Group,Yibin 644007 China);The prediction and control on the springback of the front inner panel of automobile at multi-steps stamping[J];塑性工程学报;2009-06
6 JIANG Bing-yun1,YIN Li-ming2,CHEN Wei1,CHENG Shan1(1.Institute of Die and Mould Technology,Jiangsu University,Zhenjiang,Jiangsu 212013,China;2.Jiangsu Engineering Technology Research Center of Precision High-speed Die,Kunshan,Jiangsu 215316,China);The bending forming of precision progressive die based on energy conservation and numerical simulation[J];模具工业;2009-11
7 WANG Jinsheng, WANG Weibing, LI Jinguo (Taizhou Vocational and Technical College, Taizhou 318000, China);Influence of Drawbead Parameter on Quality of Automobile Panel Forming[J];热加工工艺;2009-19
8 QIU Xiao-ning,LIU Hong-bin,WANG Yi(Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650093,China);Analysis and solving scheme on corrugation problem in the formation of plate materials[J];机械设计;2009-09
9 YE Yugang1,XUE Yong2,3,DUAN Jiangnian2 (1.School of Mechanical Engineering and Automation,North University of China,Taiyuan,030051,Shanxi China; 2.School of Mechanical Engineering and Automation,Beijing University of Aeronautics & Astronautics,Beijing 100083,China; 3.School of Material Science and Engineering, North University of China, Taiyuan 030051,Shanxi China);Current Study on Simulation and Compensation of Springback in Sheet Metal Forming Process[J];锻压装备与制造技术;2009-03
10 LIU Zhi-hong,YU Jie,WU Jie-feng,LI Bo(Institute of Plasma Physics,Chinese Academy of Sciences,Hefei 230031);Numerical simulation of CICC rolling process[J];核聚变与等离子体物理;2008-01
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 YU Hai-yan;CHEN Si-ji;HE Ze-zhen;School of Automotive Studies,Tongji University;;Study on inelastic recovery behavior of magnesium alloy sheets[J];塑性工程学报;2017-04
2 Ruan Yingyan;Hu Wenzhi;Kang Jie;Mu Chuankun;Zhang Yaqi;Wang Bin;Zhou Hailong;Engineering Department,Technical Center of Dongfeng Motor Corporation;;Research and application on flexible stamping trial technique of military vehicle door assembly[J];锻压技术;2017-07
3 TIAN Chuan-chen;Tangshan Polytechnic College;;Scheme Design on Drawing Forming of U-shape Welding Plate Based on Numerical Simulation[J];工业技术创新;2016-06
4 Ren Gongchang;Yang Yulong;Yi Yonggang;Zhang Wenjin;Jing Bian;School of Mechanical and Electrical Engineering Shaan xi University of Science and Technology;;Technology of Hydraulic Torque Converter Turbine Roller Riveting[J];工具技术;2016-12
5 Gong Zhihui;Liu Lei;Zhong Jian;Shi Jianbing;State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University;Guangdong Guangzhou Automobile Group Motor Co.,Ltd.;;Calculation method of structural strength for automobile panel drawing die[J];锻压技术;2016-10
6 XIE Hui;YUAN Zhipeng;WANG Shien;ZHU Weidong;WANG Dongfu;State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University;Shanghai Tractor & Internal Combustion Engine Co.,Ltd.;;Design and System Development of Whole Flow Path Stamping Process for B-pillar Based on KBE[J];热加工工艺;2016-13
7 ZHANG Ying-nian;YE Xing-hui;ZHANG Xian-jin;WANG Ke-wen;ZHANG Yi-fan;ZHANG Jun-jun;Anhui Liyuan Numerical Control Cutting Tool and Patterns Manufacturing Co.,Ltd.;Anhui University of Technology;;Development of die technology based on multi-pass continuous bending[J];模具工业;2016-01
8 ;On how to improve the utilization of car cover cold die material and its great value[J];橡塑技术与装备;2015-22
9 HU Li;LI Xin;CHENG Wan-jun;SONG Kai-yue;College of Materials Science and Engineering, Jinlin University;;Autoform-based stamping simulation study on the upper inner plate of automotive left column B[J];模具工业;2015-11
10 LI Heng;XIA Chong-chong;ZHAO Yun-yun;LIU Quan-kun;Industry & Equipment Technology Institute, Hefei University of Technology;School of Materials Science and Engineering, Hefei University of Technology;;Effect of process and die parameters on bending angle of large bendings[J];模具工业;2015-07
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved