Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Mechanics in Engineering》 2008-06
Add to Favorite Get Latest Update


TANG Weiwei WANG Hong (School of Mechanics and Engineering,Southwest Jiaotong University,Chengdu 610031,China)  
The paper discusses the development of an ultrasonic symmetric bending fatigue system on the basis of the three-point bending method,including the design of ultrasonic symmetric bending samples and the influence of processing errors.The S-N curve of 50~# axle steel is determined by the ultrasonic symmetric bending fatigue system(20 KHz).The results show that the S-N curve of 50~# axle steel is a continuously declining curve.Compared to the S-N curve of 50~# axle steel under the symmetric tension and compression loading,it is shown that in the high-cycle stage,the loading method has a significant effect on fatigue properties, and in the ultra-high-cycle stage,the loading method has no significant impact on fatigue properties.
【Fund】: 西南交通大学科学研究基金项目(2005A10).
【CateGory Index】: O346.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 Shen Jingsheng1,Li Quantong1,Wu Xiaofeng2,Gao Chao1,Liu Qingchuan1 (1.The Engineering Institute,Air Force Engineering University,Xi'an 710038,Shanxi,China;2.93029 Troops 97 Squadron);Study on the Ultra High Cycle Bending Vibration Fatigue Test of Titanium Alloys[J];Iron Steel Vanadium Titanium;2011-03
2 TONG Xu-dong;LI Quan-tong;SHI Yong-fang;GAO Xing-wei;Aeronautics and Astronautics Engineering College,Air Force Engineering University;Xidian University;;Ultra-high Cycles Fatigue Properties of Titanium Alloy with Different Slight Damages on Surface[J];Materials for Mechanical Engineering;2013-09
3 LI Quan-tong,LIU Qing-chuan,SHEN Jing-sheng, CHENG Li,GAO Chao,CHEN Wei(School of Engineering,Air Force Engineering University,Xi'an 710038,China);Experiment on ultra-high cycle bending vibration fatigue of titanium alloy TC17[J];Journal of Aerospace Power;2012-03
4 GAO Chao1,CHENG Li1,PENG Hua2,SHEN Jing-sheng1, QIU Chen-lin1,LIU Yan-jie1 (1.The Engineering Institute,Air Force Engineering University,Xi'an 710038,China; 2.School of Communication Engineering, Chong Qing University,Chongqing 400044,China);Investigation of ultra-high cycle fatigue behavior of TC17 alloy at a frequency of 20kHz[J];Journal of Aerospace Power;2012-04
Chinese Journal Full-text Database 1 Hits
1 YAN Guiling WANG Hong GAO Qing (Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031, China);ULTRASONIC FATIGUE TESTING AND ITS APPLICATIONS[J];Mechanics and Engineering;2004-06
Chinese Journal Full-text Database 10 Hits
1 GUO Aming1,WANG Lizhong2,TIAN Qiuyue2(1.China BCEL International Engineering Co.;Ltd.,Beijing 100026,China;2.Hebei Institute of Architecture and Civil Engineering,Zhangjiakou 075024,China);Study on fatigue repair with stop hole techniques[J];Sichuan Building Science;2008-04
2 XU Jin-yong1,2,TANG Wan-xing1,XU Min1,DU Li1,Gao Yuan2,XU Zhong2(1.Guilin University of Electronic Technology,Guilin 541004,China;2.Taiyuan University of Technology,Taiyuan 030024,China);Study on plasma surface metallurgy Mo-Cr alloy layer of mild steel[J];Ordnance Material Science and Engineering;2006-02
3 LIU Xiaohong1,2,WANG Maoqiu2,DONG Han2,HUA Wenjie3,XU Cunying1(1.Faculty of Materials and Metallurgical Engineering,Kunming University of Science and Technology,Kunming 650093,China;2.National Engineering Research Center of Advanced Steel Technology,Central Iron and Steel Research Institute,Beijing 10008,China;3.Special Steel Branch,Baosteel Limited Company,Shanghai 200940,China);Fatigue properties of high strength martensitic steels for transmission shaft[J];Ordnance Material Science and Engineering;2009-05
4 WANG Dongsheng,CHEN Donggao,TAN Bing,SONG Jianmin,FENG Jiecai(Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Effect of ultrasonic impact treatment on properties of 7A05 alloy joint[J];Ordnance Material Science and Engineering;2009-05
5 WANG Shuhua1,X Jiawen1,AN Xiujuan2(1.Department of Material Science and Engineering,Science and Technology University of Heilongjiang,Harbin 150027,China;2.Military Products Institute of Harbin Jiancheng Group,Harbin 150000,China);Tensile properties of 1Cr18Ni9Ti steel at moderate temperature[J];Ordnance Material Science and Engineering;2010-04
6 LUO Yang,WANG Lei,LI Zhen,SU Na,TIAN Wenhuai(Department of Materials Physics and Chemistry,School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China);Influence of two additives on the plasticity of electroformed nickel in nickel sulfamate electrolyte[J];Ordnance Material Science and Engineering;2010-06
7 ZHU Hou-guo,ZHAO Kun(FCW Department of Harbin Welding Institute,Harbin 150080);Research on Thermal Fatigue Resistance Overlay Welding Materials for Repairing the Casting Pipe Model[J];China Surface Engineering;2009-06
8 Hugjiltu,ZHANG Bang-wen(Rare Earth School,Inner Mongolia University of Science and Technology,Baotou 014010,China);Machanical properties of anisotropic silicon rubber filled iron particles[J];Journal of Inner Mongolia University of Science and Technology;2011-03
9 Hou Xuming(Material Engineering Department,Baotou Vocational & Technical College, Baotou Inner Mongolia, 014030);The Influence of Notch on the Fatigue Property of Metal Parts and its Examples[J];Journal of Baotou Vocational & Technical College;2006-01
10 Hou Xuming(Material Engineering Department,Baotou Vocational & Technical College,Baotou Inner Mongolia,014030);Cause Analysis on the Lower Contact Fatigue Strength of Nitrided Part[J];Journal of Baotou Vocational & Technical College;2009-04
China Proceedings of conference Full-text Database 10 Hits
1 WANG Shao-yun~1,LI Guo-lu~1,WANG Hai-dou~2,LIU Jin-hai~1,XU Bin-shi~2,PIAO Zhong-yu~2 (1.School of Materials Soience and Engineering,Hebei University of Technology,Tianjin 300130,China; 2.National Key Lab for Remanufacturing,Academy of Armored Forces Engineering,Beijing 100072,China);Accelerated fatigue life testing of NiCr-Cr_3C_2 coating at different loads under rolling contact condition[A];[C];2011
2 QU Shen,ZHANG Zhe-feng,TIAN Ji-feng (Institute of Metal Research,CAS,Shenyang,110016,China);Cracking analysis on 40Cr steel earring bar of load cylinder[A];[C];2011
3 Cao Zhishun,Yao Jianyao,Wang Jianjun;High Cycle Fatigue Life Assessing Technique for Aviation Engine Rotating Parts Based on the Probabilistic Nature[A];[C];2011
4 Xie Qing Wang Hong Wang Yunbin (School of mechanics and engineering,Southwest Jiaotong University,Chengdu 610031,Sichuan,China);Effects of medical alcohol on mechanical property of TC4 titanium alloy[A];[C];2008
5 CHEN Sha-gu,WANG Qing-yuan,DONG Shi-ming (School of Architecture and Environment,Sichuan Univ.,Chengdu 610065,China);The Design of Dog-bone-shaped Ultrasonic Vibrational Fatigue Specimen[A];[C];2008
6 ZHOU Meng-jiao,WANG Hong (School of Mechanics and Eng.,Southwest Jiaotong Univ.,Chengdu 610031,China);Study on the Gigacycle Fatigue Behaviors of 40Cr Steel Under Variable Amplitude Loading[A];[C];2010
7 ;Research Progress on Fatigue Properties of C/C Composites[A];[C];2010
8 Ye Xubin~①ZhangFuze~②Guo Hongquan~①SongJun~①(①Beijing Institute of Aeronautical Materials,Beijing China) (②Beijing Aeronautical Technology Research Center,Beijing China);Study on Fatigue and Crack Behavior Research of Three Kinds of Aeronautical Materials Under Low Temperature Environment[A];[C];2008
9 PAN San-san WU Shen-qing (School of Materials and Science and Engineering,Southeast University,Nanjing 211189,Jiangsu,China);Experiments and researches on thermal fatigue of M124F by squeezing casting[A];[C];2008
10 Guo Wen-tao1, LI Jun-wen1, JIA Zheng1,2 (1.College of Material and Chemical Engineering, Liaoning University of Technology, Jinzhou 121001, China; 2. College of Materials and Metallurgy,Northeastern University,Shenyang 110004,China);Effect of ultrasonic power on solidification structure and mechanical properties of ZA27 bearing alloy[A];[C];2009
Chinese Journal Full-text Database 10 Hits
1 PEI Xian-ru,GAO Hai-rong(Department of Chemistry,Zhengzhou Teachers'College,Zhengzhou 450044,China);The Research State and Influence of Piezoelectric Materials[J];Anhui Chemical Industry;2010-03
2 WANG Wei,TIAN Li,BAO Zhi-yong,LIU Xiao-wei,WANG Xi-lian,YANG Song-tao (MEMS Center,Harbin Institute of Technology,Harbin 150001,China);Research and Fabrication of a Bi-directional Piezoelectric Micropump[J];Chinese Journal of Sensors and Actuators;2006-05
3 XU Liang,YING Ji,LI Jun(Department of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China);Research and fabrication of a low-cost valveless micropump based on piezoelectric actuation[J];Transducer and Microsystem Technologies;2011-03
4 SHAO Chuang1,BATHIAS Cloude2,WAGNER Danièle2,TAO Hua1,XUE Hongqian1 (1 School of Mechatronic Engineering,Northwestern Polytechnical University,Xi'an 710072; 2 LEEE,Université PARIS X,Ville d'avray 92410);Very High Cycle Fatigue Behavior and Thermographic Analysis of a High Strength Steel[J];Materials Review;2010-16
5 XUE Hong-qian1, YANG Bin-tang1, C.Bathias2(1 School of Mechatrnic, Northwestern Polytechnical University, Xi’an 710072, China;2 ITMA/CNAM, Laboratory of Fatigue and Fracture Mechanics, Paris 75003, France);Very High Cycle Fatigue Behavior and Thermographic Analysis of High Strength Steels Under High Frequency Loading[J];Journal of Materials Engineering;2009-03
6 ZHANG Hong-cai1,JI Hua2,GOU Guo-qing2,LI Da2,CHEN Hui2(1.CSR Sifang Locomotive and Rolling Stock Co.,Ltd.,Qingdao 266000,China;2.Institute of Materials Science and Engineering,Southwest Jiaotong University,Chengdu 610031,China);Research on thermal cycle and residual stress of A5083P-O aluminum alloy MIG welding on high speed train[J];Electric Welding Machine;2011-11
7 CHEN Jian\|mei, YING Ji\;(Mechanical Engineering Department,Zhejiang University,Hangzhou 310027,China);Research on terminal behavior of piezoelectrical driven micropump[J];Journal of Engineering Design;2003-04
8 XU Yongli,LI Shangping (Box101,Dept. of Materials Sci. & Eng.,Beijing Univ. of Aero. & Astro.,Beijing,100083,China);Development and Prospect of Ferroelectric Ceramic Actuators[J];JOURNAL OF FUNCTIONAL MATERIALS;2000-S1
9 GUAN Xin,MENG Yan-jun(Department of Materials Engineering,Hebei Institute ofVocational Technique,Shijiazhuang 050091,China);Research and development on ultra high cycle fatigue[J];Research on Iron and Steel;2009-01
10 WANG Hong, GAO Qing (Southwest Jiaotong University, Chengdu 610031, China);Fatigue Behavior of 40Cr Steel in Ultrasonic Fatigue Testing[J];Materials For Mechanical Engineering;2003-12
【Secondary References】
Chinese Journal Full-text Database 4 Hits
1 TONG Xu-dong;LI Quan-tong;SHI Yong-fang;GAO Xing-wei;Aeronautics and Astronautics Engineering College,Air Force Engineering University;Xidian University;;Ultra-high Cycles Fatigue Properties of Titanium Alloy with Different Slight Damages on Surface[J];Materials for Mechanical Engineering;2013-09
2 ZHANG Hai-wei,HE Yu-ting,CHENG Li,GAO Chao,ZHANG Teng(Aeronautics and Astronautics Engineering Institute,Air Force Engineering University,Xi′an 710038,China);Ultra-high-cycle Fatigue Performance of a Titanium Alloy[J];Journal of Aeronautical Materials;2013-03
3 LI Jiu-kai;LIU Yong-jie;WANG Qing-yuan;HOU Fang;Key Laboratory of Ministry of Education for Energy Engineering Safety and Disaster Mechanics,College of Architecture and Environment,Sichuan University;School of Aeronautics and Astronautics,Sichuan University;;High-temperature ultra-high cycle fatigue test of TC17 titanium alloy[J];Journal of Aerospace Power;2014-07
4 LI Quan-tong;TONG Xu-dong;GAO Xing-wei;CHEN Wei;CHENG Li;Aeronautics and Astronautics Engineering College,Air Force Engineering University;;Estimation method of blade high cycle fatigue life based on ultra-high cycle fatigue test of specimen[J];Journal of Aerospace Power;2014-10
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
2 WANG Hong, GAO Qing (Southwest Jiaotong University, Chengdu 610031, China);Influence of Notch Stress-concentration on the Ultra-high-cycle Fatigue Behaviors of 40Cr Steel[J];Materials For Mechanical Engineering;2004-08
3 Ni Jingang (4th Dept.Beijing University of Aeronautics and Astronautics,Beijing 100083);APPLICATION OF ULTRASONIC FATIGUE TESTING TECHNIQUE[J];JOURNAL OF AEROSPACE POWER;1995-03
4 XUE Hong-qian, TAO Hua (Department of Aircraft Manufacturing Engineering, Northwestern Polytechnical University, Xi′an710072, China);Investigation of Superhigh Cycle Fatigue Behavior on Nodular Cast Iron[J];Acta Aeronautica Et Astronautica Sinica;2004-01
5 Ni Jingang(Faculty 405,Beijing University of Aeronautics and Astronautics,Bebing,100083)C. Bathias ( CNAM,Labo. de Metallurgie,292 Rue St.Martin,75 l41 Paris,Franee);STUDY ON THEFATIGUELIFE BEHAVIORS OF ALLOYS UNDER ULTRASONIC FATIGUELOADING[J];ACTA AERONAUTICA ET ASTRONAUTICA SINICA;1994-11
6 Li Huaiming;Yang Rang;Relationship between Cyclic Strain Behavior of Tempered Sorbite in a Rail Steel and Its Dislocation Structures[J];JOURNAL OF IRON AND STEEL RESEARCH;1995-01
7 by LIN Jizhong; LIU Shuhua; WU Yushu; LI Yi (China Academy of Railway Sciences) (Manuscript received 22 April, 1986; revised manuscript 25 August, 1986);THE CRITICAL STRESS OF FATIGUE CRACK INITIATION FOR MEDIUM CARBON STEEL[J];Acta Metallurgica Sinica;1987-04
8 XUE Hong-qian 1 , TAO Hua 1 , WANG Hong 2 ( 1Northwestern Polytechnical University, Xi′an 710072; 2Southwest Jiaotong University, Chengdu 610000);Study on Ultrasonic Fatigue Properties of LY10[J];Mechanical Science and Technology;2004-04
9 Tao Hua (Northwestern Polytechnical Univerisity, Xian 710072);Study on the Ultrasonic Fatigue Life of a Nodular Cast Iron GS 52[J];MECHANICAL SCIENCE AND TECHNOLOGY;1998-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved