Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Tribology》 2007-01
Add to Favorite Get Latest Update

Tribological Properties of Ni-clad Nano-Al_2O_3 Composite Coatings by High-energy Laser Irradiation

JU Yi,GUO Shao-yi,CHEN Sheng-zuan,YE Bing-liang(Institute of Surface Engineering,Zhejiang Sci-Tech University,Hangzhou 310018,China)  
Ni-clad nano-Al_2O_3 composite coatings were prepared on carbon steel plate by high power continuous wave CO_2 laser beam.The fabrication of Ni-clad nano-Al_2O_3 composite coatings was investigated.The friction properties were examined under dry sliding condition using pin-on-disc tester.The results showed that the Ni-clad nano-Al_2O_3 composite coating had a microhardness value of 810Hv,greater than for without treated ones. The Ni-clad nano-Al_2O_3 composite coating possessed not only a higher wear resistance but also a lower friction coefficient.It is interest to note that the wear mass loss and friction coefficient of Ni-clad nano-Al_2O_3 composite coatings reduced to about 38% and 40% in comparison with those without coating respectively.The nano-Al_2O_3 were uniformly distributed in the carbon steel matrix and greatly increased the microhardness and tribological properties of the Ni-clad nano-Al_2O_3 composite coatings.The results also showed that the amount of Al_2O_3 significantly affected wear resistance of Ni-clad nano-Al_2O_3 composite coatings but they had little influence on their friction coefficient.
【Fund】: 浙江省自然科学基金资助项目(Y404277);; 浙江省科技攻关重点项目资助(2005C21044)
【CateGory Index】: TB383.1;TG174.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 GENG Ya-wei,WANG Dong-sheng,TIAN Zong-jun,SHEN Li-da,LIU Zhi-dong,HUANG Yin-hui(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing Jiangsu 210016,China);Study on Laser-remelted Ceramic Coatings of TiAl Alloy Surface[J];Heat Treatment Technology and Equipment;2008-05
2 CHEN Zhi-kun1,2,LIU Min2,ZENG De-chang1,MA Wen-you2 (1.School of Materials Science & Engineering,South China University of Technology,Guangzhou 510640,China;2.Guangzhou Research Institute of Non-ferrous Metals,Guangzhou 510650,China);Research on formation causes and elimination methods of the laser cladding cracks[J];Laser Journal;2009-01
3 Wang Dongsheng1,2 Tian Zongjun1,2 Shen Lida2 Liu Zhidong1,2 Huang Yinhui1,21Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology,2College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,Jiangsu 210016,China;Research Development of Nanostructured Coatings Prepared by Laser Cladding[J];Chinese Journal of Lasers;2008-11
4 PENG Cheng-zhang,ZHANG Xiao-bo(College of Mechanical and Electrical Engineering,Jiangxi University of Science and Technology,Ganzhou 341000,Jiangxi,China);Microstructure and Friction Properties of Ni-based Nano-Al_2O_3 Coating by Laser Cladding[J];Mining and Metallurgical Engineering;2008-06
【Citations】
Chinese Journal Full-text Database 3 Hits
1 LIU Yan~1,REN Lu-quan~1,YU Si-rong~2,HAN Zhi-wu~1 (1.The Key Laboratory for Terrain-machine Bionics Engineering,The Ministry of Education,College of Biology and Agriculture Engineering,Jinlin University,Changchun 130025,China;2.College of Material Science and engineering,Jinlin University,Changchun 130025,China);Research on capability of casting iron surface by laser cladding nano-Al_2O_3[J];Journal of Functional Materials;2005-08
2 YAO Jian-hua,ZHANG Wei(Key Laboratory of Mechanical Manufacture and Automation,The Ministry of Education,Zhejiang University of Technology,Hangzhou,Zhejiang 310014,China);Ni-Coated Nano-Al_2O_3 Composite Coating Prepared by Laser Cladding[J];Chinese Journal of Lasers;2006-05
3 YUAN Xiao-min, LI Ming-xi, HE Yi-zhu (Research Center for Laser Processing, Anhui University of Technology, Ma'anshan 243002, China);Microstructure and Wear-Resistance of Nano-Al_2O_3 Doped Co-Alloy-Based Composite Coating Produced by Laser Cladding[J];Tribology;2004-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Li ( Department of Civil Engineering, Yiwu College of Industry & Commerce, Yiwu 322000, China).;Microstructure and Microhardness of Laser Cladding Nickel Alloy-Matrix Composite Coating Reinforced with MicroNano Tungsten Carbide[J];Materials Protection;2006-12
2 LUO Xun,XUAN Tian-peng(Institute of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China);Recent Progress and Research Status of Wear-resisting Ni-based Alloy Coatings[J];Electroplating & Pollution Control;2007-03
3 Xiao Rongshi,Chen Kai,Chen Tao(Beijing University of Technology,Beijing 100124);Review of Laser Advanced Manufacturing Technology[J];Electromachining & Mould;2009-S1
4 LI Jun,ZHANG Guang-jun,LI Wen-ge(Shanghai University of Engineering Science,Shanghai 201620,China);Research Progress of Nano-composite Coating Prepared by Laser Cladding[J];Materials for Mechanical Engineering;2007-11
5 Yin Chunhao Lü Haiping Li Zebin Wei Xuesong Niu Yingxi Zhao Qiang(College of Science,China University of Mining and Technology,Xuzhou,Jiangsu 221008,China);Spectral Fine Structure,Zero-Field Splitting Parameters and Crystal Structure of Sapphire[J];Acta Optica Sinica;2008-11
6 YANG Shanglei1,2,ZHANG Wenhong3,LI Fabing1,HU Fengguang3,CHEN Aizhong3,L Yunjiang3(1.College of Material Science and Engineering,Qingdao University of Science and Technology,Qingdao 266042,China;2.Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China;3.Yankuang Lunan Chemical Fertilizer Plant,Tengzhou 277527,China);Investigation on laser cladded nano-Y_2O_3 and cobalt based composite coating[J];Transactions of the China Welding Institution;2009-02
7 YAO Jian-hua1,2, YE Liang-wu1,2, LUO Fang1,2,ZHANG Wei1,2, KONG Fan-zhi1,2, DONG Shi-yun31Key Laboratory of Mechanical Manufacture and Automation, Ministry of Education, 2Research Center of LaserProcessing Technology and Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, China3National Defense Key Laboratory for Remanufacturing, Academy for Armored Forces Engineering, Beijing 100072, China;Laser Strengthening Nano-Composite Plating Al_2O_3 Coating[J];Chinese Journal of Lasers;2007-07
8 XU Bing1,SONG Ren-guo1,TANG Pu-hong1,WANG Jing1,CAI Guo-zhong1,ZHANG Yin-zhu2,YE Zhi-zhen2 1Key Laboratory of Mechanical Manufacturing and Automation,Ministry of Education,Zhejiang University of Technology,Hangzhou,Zhejiang 310014,China 2State Key Laboratory of Silicon Materials,Zhejiang University,Hangzhou, Zhejiang 310027,China;Preparation of Silver Nanoparticles Colloid by Pulsed Laser Ablation[J];Chinese Journal of Lasers;2007-11
9 Wang Dongsheng Huang Yinhui Tian ZongjunLiu Zhidong Zhu Jun Chen Jingsong(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,Jiangsu 210016,China);Effect of Laser Remelting on Microstructure and Properties of Nanocrystalline Nickel Coating Prepared by Jet Electrodepositing[J];Chinese Journal of Lasers;2008-01
10 Dun Aihuan Yao Jianhua Kong Fanzhi Zhang Wei(Key Laboratory of Mechanical Manufacture and Automation,Ministry of Education,Research Center of Laser Processing Technology and Engineering,Zhejiang University of Technology,Hangzhou,Zhejiang 310014,China);Microstructure Characterization of Ni-P-Al_2O_3 Electroless Composite Plating on Fe-C Alloy Treated by Laser Beam[J];Chinese Journal of Lasers;2008-10
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Gao Yong Dept of Inorganic Material, South China University of Technology, Guangzhou 510641;PROPERTIES OF NANOMTER MATERIAL AND PREPARATION TECHNOLOGY[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1997-06
2 MA Yun-zhe, DONG Shi-yun, XU Bin-shi, HAN Wen-zheng (National Key Laboratory for Remanufacturing, Beijing 100072 China);Effect of CeO_2 on Microstructure and Performance of Laser Cladding Ni-based Alloy Coatings[J];China Surface Engineering;2006-01
3 LIU Chang song, YIN Sheng(83);Advance in Reactive Thermal Spraying[J];MATERIAIS PROTECTION;2000-01
4 Chen Guohang(State Key Laboratory for Advanced Metals and Materials .University of Science and Technology Beijing,Beijing 100083 China);R&D Status and Prospect on the Ordered Structural Intermetallics[J];Materials Review;2000-09
5 DONG Shiyun, MA Yunzhe, XU Binshi, HAN Wenzheng(National Key Laboratory for Remanufacturing, Academy for Armored Forces Engineering, Beijing 100072);Current Status of Material for Laser Cladding[J];Materials Review;2006-06
6 WANG Bin,PENG Zhifang,ZHANG Fan,XIA Li(Department of Materials Engineering, College of Power and Mechanical Engineering, Wuhan University, Wuhan 430072);Research Progress in Preparing Iron Aluminide Intermetalics Materials by Powder Metallurgy[J];Materials Review;2007-01
7 ZHANG Jian,ZHENG Hai-zhong,XU Zhi-feng,SUN Sheng-wei,LIU Yue-hua(Nanchang Institute of Aeronautical & Technology,Nanchang 330034,China);Study on Characterization of Core-shell Nano-Al_2O_3/PS Composite Particles and Toughening Polystyrene Prepared by SLS[J];Journal of Materials Engineering;2007-03
8 Fan Runhua 1 Liu Yingcai 2 Yin Yansheng 1 1Shandong University of Technology, Jinan, 250061 2 Hebei University of Science & Technology, Shijiazhuang 050054;A Review of Recent Development in the Strength and Ductility Improvements of Fe 3Al Intermetallics[J];MATERIALS SCIENCE AND ENGINEERING;1997-04
9 Wang Lirui, Tian Zongjun, Zhao Jianfeng, Hua Guoran, Zhang Jianhua, Huang Yinhui (Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China);Laser Cladding of Nano-silicon Carbide on 42SiMn[J];Development and Application of Materials;2003-04
10 Chen Jing, Lin Xin, Wang Tao, Yang Haiou, Huang Weidong (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China);The Hot Cracking Mechanism of 316L Stainless Steel Cladding in Rapid Laser Forming Process[J];Rare Metal Materials and Engineering;2003-03
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 Xiao Rongshi,Chen Kai,Chen Tao(Beijing University of Technology,Beijing 100124);Review of Laser Advanced Manufacturing Technology[J];Electromachining & Mould;2009-S1
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 Xu Longtang,Xu Binshi,Ma Shining,Zhou Meiling;STRUCTURE AND PROPERTIES OF BRUSH-PLATING Ni/Ni~+Al_2O_3 COATING[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-04
2 Xu Lina,Zhou Kaichang,Zhai Ya ,Zhang Xueyun,Ou Danlin Liu Chunping,Gu Ning,Zhang Haiqian,Liu Juzheng(Southeast University,Nanjing 210096,China);Quick Nickel Metallization and Magnetic Properties on the Surface of Alumina Powder[J];Rare Metal Materials and Engineering;2003-05
3 Li Mingxi 1,2 He Yizhu 2 Sun Guoxiong 1 ( 1Department of Mechanical Engineering, Southeast University, Nanjing 210096, China) ( 2Laser Processing Center, Anhui University of Technology, Maanshan 243002, China);Microstructure and crystallization direction of laser cladding Co-based alloy[J];Journal of Southeast Univwrsity(Natural Science Edition);2002-06
4 He Yi-zhu, SI Song-hua, XU Kun, YUAN Xiao-min (School of Material Science and Engineering, Anhui University of Technology, Maanshan, Anhui 243002, China);Effect of Cr_3C_2 Particles on Microstructure and Corrosion-Wear Resistance of Laser Cladding Co-based Alloy Coating[J];Chinese Journal of Lasers;2004-09
5 LI Ming-xi 1,2, HE Yi-zhu1, SUN Guo-xiong2 1Research Center for Laser Processing, Anhui University of Technology, Maanshan, Anhui 243002, China 2Department of Mechanical Science and Engineering, Southeast University, Nanjing, Jiangsu 210096, China;Al_2O_3 Nanocrystalline/Ni-Based Alloy Composite Coatings Produced by Laser Cladding[J];Chinese Journal of Lasers;2004-09
6 ZHANG Wei-ping, LIU Shuo, MA Yu-tao(Department of Materials Engineering,Dali an University of Technology,Liaoning,Dalian,116023,China);Strengthening Mechanism of Particle Reinforced Metal Matrix Composite Coating by Laser Cladding[J];Transactions of Materids and Heat Treatment;2005-01
7 XU Long tang 1, XU Bin shi 1, ZHOU Mei ling 2, MA Shi ning 1, ZHANG wei 1 (1.Surface Engineering Institute of CMES, Beijing 100072, China; 2.School of Materials Science, Beijing Polytechnic University, Beijing 100022, China);Anti-fretting Properties of Ni/Ni-coated nano-Al_2O_3 Composite Coating Prepared by Electro-brush Plating[J];Tribology;2001-01
8 HE Chun-xia (College of Engineering, Nanjing Agricultural University,Nanjing 210032,China);Friction and Wear Properties of Ultra-high-molecular-weight-polyethylene and Its Composites Filled With Nanocrystalline Al_2O_3[J];Tribology;2002-01
9 HAO Bin, WANG Hong bin, CAI Yuan hua,CUI Hua, YANG Bin, ZHANG Ji shan (State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China);Review of Preparation Technology for Particle Reinforced Metal Matrix Composite[J];Hot Working Technology;2005-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved