Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Machinery》 2007-12
Add to Favorite Get Latest Update

A summary of research on the damping generation theory of machine joint surface

WANG Song-tao,WANG Li-hua,ZHANG Peng(Kunming University of Science and Technology,Kunming 650093,China)  
This paper introduced the basic concept about machine joint surface.comprehensively introduced the history and current status of research on damping generation theory of machine joint surface.Analyzed and summed up the damping generation theory of machine joint surface.Made a summary that the damping generation theory of machine joint surface was different in different condition,then separately introduced the condition that there was lubricate film and there was not lubricate film between the joint surface.Put stress on introducing the periodical hysteresis transform was an important reason that generate the damping of machine joint surface and proved its accuracy.Finally the existing problems were pointed out.
【CateGory Index】: TH111
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 YOU Jinmin,CHEN Tianning (School of Mechanical Engineering, Xi′an Jiaotong University,Xi′an 710049,China);Parameters Identification for Joint Surfaces of Cantilever Beam[J];Journal of Xi'an Jiaotong University;2008-11
【Citations】
Chinese Journal Full-text Database 4 Hits
1 Yang Jiahua; Chen Weifu; Huang Xudong (School of Mechanical Engineering and Applied Electronic Techmology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083 );Research on Identification of the Structural Interface Parameter of Machine Tool Bed with Column[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;1999-01
2 ZHANG Xue liang,XU Ge ning,WEN Shu hua (Taiyuan Heavy Machinery Institute,Taiyuan 030024,China);Review and Prospect of the Research on the Static and Dynamic Characteristics of Machine Joint Surfaces[J];Journal of Taiyuan Heavy Machinery Institute;2002-03
3 Huang Yumei;Fu Weiping;Tong Junxian(Xi'an University of Technology, Xi'an 710048);A Mathod of Acquiring Applied Tangential Damping Parameters of Joint Surfaces[J];JOURNAL OF XI'AN UNIVERSITY OF TECHNOLOGY;1996-01
4 Liu Xiaoping (Beijing University of Posts and Telecommunications)Xu Yanshen;Song Jianwei;Peng Zemin(Mechanical Engineering Department Tianjin University);DAMPING IDENTIFICATION OF THE MECHANICAL STRUCTURAL JOINT SURFACE[J];JOURNAL OF VIBRATION AND SHOCK;1995-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 YANG Jia-hua, GUAN Hua, GUO Ning-jun (College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China;College of Mechanical Engineering, Beijing University of Science and Technology, Beijing 100083, China;Beiren Printing Machinery Holdings Limited Co., Beijing 100022, China);The Finite Element Analysis About the Vibration of Printing Presses[J];Journal of Beijing University of Technology;2006-06
2 PENG Zhaoyang,LIU Xiaoping(Automation School, Beijing University of Posts and Telecommunications, Beijing 100876, China);A Fuzzy Method of Identifying Joint Parameters of Mechanical Structure[J];Journal of Beijing University of Posts and Telecommunications;2003-03
3 Liu Xianhui(No. 2 Machine Tool Factory of Changsha, Changsha, 41000)Che Xiaoyi(Changde Teachers University, Changde, 415003);A Study on the Noise from Machine Tool CW6136[J];JOURNAL OF CHANGDE TEACHERS UNIVERSITY;1999-04
4 YU Ying-hua1,WANG Ming-xu2,XU Ping1(1.College of Mechanical Engineering,Liaoning Technical University,Fuxin 123000,China;2.College of Aerospace and Engineering,Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China);Thermal property of machine tool structural elements made of steel-fiber polymer concrete[J];Journal of Lanzhou University of Technology;2008-03
5 Wu Shiqian;Yu Xingzhuo; Hu Dazhe;Zhang Jiangan;Development of Machine Tool Overall Structure and Design[J];JOURNAL OF HUBEI POLYTECHNIC UNIVERSITY;1994-03
6 GUO Qin-tao, ZHANG Ling-mi(Institute of Vibration Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China);Identification of the Mechanical Joint Parameters with Model Uncertainty[J];中国航空学报(英文版);2005-01
7 Liang Ronghui et al;The modular design of horizontal lathe and the applicalion of programmable controller[J];MACHINE TOOL & HYDRAULICS;1999-04
8 Shi Yuxiang et al;Research on mechatronics' modular theory[J];Machine Tool & Hydraulics;2000-04
9 Ouyang Guang-yao1 Gao Hong-bin1 Wang Yu2 Huang Ying-yun1 Zou Kai-feng3 1 College of Naval Architecture and Power, Naval University of Engineering, Wuhan 430033, China 2 Ship Institute, Navy Equipment Academy, Beijing 100073, China 3 Qingdao Campus of Naval Aeronautical Engineering Institute, Qingdao 266041, China;Overview of Shock Analysis of Shipboard Diesel Engine[J];Chinese Journal of Ship Research;2009-02
10 YAN Zhan hui 1, YU Jun yi 2 (1.Dept of Mechanical Engineering,Chanchun Institute of Technology,Changchun 130012,China; 2.College of Mechanical Science & Engineering,Jilin University,Changchun 130025,China);The Survey of Thermal Deformation for Machine Tools[J];Journal of Jilin University of Technology(Natural Science Edition);2001-03
【Co-references】
Chinese Journal Full-text Database 3 Hits
1 Yang Jiahua, Wu Liangsheng (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing, 100022) Guan Hua (University of Science and Technology, Beijing, 100083);Research on Identification of Interface Parameter of Two Joint's Planes[J];JOURNAL OF BEIJING POLYTECHNIC UNIVERSITY;2000-03
2 Zhang Guangpeng Shi Wenhao Huang Yumei (Xi'an University of Technology);ANALYSYS METHOD OF DYNAMIC BEHAVIORS OF GUIDWAY JOINT AND ITS APPICATION IN MACHINE TOOLS DESIGN[J];Chinese Journal of Mechanical Engineering;2002-10
3 Wang Linlin; Lin Yufei; Tang Cengxue; Zhou Hongbin(Qiqihar First Tool Factory) (Qiqihar Textile Factory) (Qiqihar Second Tool Factory);Research on the Equivalent Stiffness Coefficient and Damping Coefficient of Fixed Joints in Machine Tools[J];;1997-01
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 YOU Jinmin,CHEN Tianning (School of Mechanical Engineering, Xi′an Jiaotong University,Xi′an 710049,China);Fractal Model for Normal Dynamic Parameters of Joint Surfaces[J];Journal of Xi'an Jiaotong University;2009-09
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 Zhang Xueliang Huang Yumei Zhao Honglin Li Mingan (Xi′an University of Technology,Xi′an 710084);The Prediction of the Basic Characteristic Parameters of Joint Surfaces by BP Neural Network[J];MECHANICAL SCIENCE AND TECHNOLOGY;1996-05
2 Huang Yumei;Fu Weiping;Tong Junxian(Xi'an University of Technology, Xi'an 710048);A Mathod of Acquiring Applied Tangential Damping Parameters of Joint Surfaces[J];JOURNAL OF XI'AN UNIVERSITY OF TECHNOLOGY;1996-01
3 Liu Xiaoping Xu Yanshen Peng Zemin Song Jianwei (Tianjin University);Identification the Dynamic Parameters of Structural Joint Via Experimental and Modal Analysis[J];Chinese Journal of Applied Mechanics;1993-04
4 Tong Zhongfang Zhang Jie (Zhejiang University);RESEARCH ON THE DYNAMIC CHARACTERISTIC AND ITS IDENTIFICATION OF THE JOINT BETWEEN COLUMN AND BED OF A MACHINING CENTER[J];Journal of Vibration and Shock;1992-03
5 Hong Zhongyu;Zhou Qian(Shanghai Institute of Mechanical Engineering)(China Ship Scientific Research Center);IDENTIFICATION TECHNIQUE OF THE CONNECTING STIFFNESS FOR COMPLEX STRUCTURE USING OPTIMIZATION[J];JOURNAL OF VIBRATION AND SHOCK;1994-01
6 Yu Dejie(Hunan University);MODIFYING DYNAMICAL MODEL OF DAMPED STRUCTURES BY USING OF OPTIMIZATION TECHNIQUE[J];JOURNAL OF VIBRATION AND SHOCK;1994-02
7 Liao Baiyu Liao Yongyi (Kunming Institute of Technology);Approach to Modeling the Dynamic Characteristics of Machine Tool Structures with Applications[J];Journal of Vibration Engineering;1990-01
8 ;Method of processing joining condition in predicting the result of machine tool structural design[J];;1990-06
9 Zhang Xueliang, et al (8);Modelling Static-basic Characteristic Parameter of Machine Tool Joint Surfaces and its Application[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1997-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved