Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2013-08
Add to Favorite Get Latest Update

Hot runner injection mould for battery installing box

ZHANG Shui-lian(Guangdong Technician College,Huizhou,Guangdong 516100,China)  
The structure and type of the hot runner gating system used in the injection mould for a battery installing box were presented.Through the side core-pulling mecha nism using angle guide pillar,the demoulding of side hole was realized.The moulding cy cle was shortened and the material was saved by using the hot runner gating system while the quality of products was also improved.
【CateGory Index】: TQ320.5
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wu Liying (The 39th Institute of CETC, Xi’an 710065, China);DEVELOPMENT OF HIGH-PRECISION GFRP COIL-SKELETON[J];Engineering Plastics Application;2004-12
2 Li Xizhang(Hunan Urban Construction College,Xiangtan 411103,China);DESIGN INJECTION MOULD WITH QUADRATIC EJECTING MECHANISM OF SLIDER AND WEDGE DUAL PUSH PLATE[J];Engineering Plastics Application;2009-03
3 Xu Yongjun,Wu Dongming(Department of Mechanical Engineering,Guangdong Vocational College of Industry and Commerce,Guangzhou 510510,China);DESIGN OF INJECTION MOULD FOR BACK CAP OF DIGITAL CAMERA[J];Engineering Plastics Application;2009-06
4 Song Xiaohui1,Fan Xiaohong2,Ye Dong1(1.Guilin College of Aeospace Technology,Guilin 541004,China;2.Xiangshan Tongjia Mould Manufacture Ltd.Co.,Ningbo 315700,China);DESIGN OF INJECTION MOLD FOR LEFT SHELL OF AUTOMOBILE AIR-CONDITION[J];Engineering Plastics Application;2009-08
5 Tan Yu,Huang Hanxiong(Center of Polymer Processing Equipment and Intellectualization,School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China);EFFECTS OF PROCESSING PARAMETERS ON SHRINKAGE AND ITS UNIFORMITY OF PRODUCT BY INJECTION COMPRESSING MOLDING[J];Engineering Plastics Application;2009-11
6 Li Changfeng,Jiang Bingyan,Shen Ruixia,Hou Wentan(Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing,Ministry of Education,College of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);DESIGN OF ULTRASONIC VIBRATION ASSISTED INJECTION MOLD FOR MICROFLUIDIC CHIP[J];Engineering Plastics Application;2010-02
7 Jiang Yuhua,Rao Honghui,Hu Qi(College of Engineering and Technology,Nanchang 330045,China);DESIGN OF INJECTION MOULD FOR THE COVER OF THE CONTROLLER[J];Engineering Plastics Application;2010-03
8 Song Xiaohui,Wu Lingfang(Guilin College of Aerospace Technology,Guilin 541004,China)Fan Xiaohong(Guilin Symprises Technology Ltd.,Guilin 541004,China)Yu Shengrui(School of Mechanical and Electronic Engineering of Jingdezhen Ceramic Institute,Jingdezhen 333000,China);DESIGN OF INJECTION MOLD FOR AIR OUTLET OF AUTOMOBILE TOP AIR-CONDITION[J];Engineering Plastics Application;2010-07
9 Xu Yongjun,Zhao Benwang (Department of Mechanical Engineering,Guangdong Vocational College of Industry and Commerce,Guangzhou 510510,China);DESIGN OF INJECTION MOULD FOR FRONT CAP OF INSTRUMENT[J];Engineering Plastics Application;2010-08
10 Li Xizhang,Li Wenjin(Hunan Urban Construction College,Xiangtan 411103,China);DESIGN OF TAP INJECTION MOLD[J];Engineering Plastics Application;2010-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved