Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
Add to Favorite Get Latest Update

Modeling of 3D Free-Curved Surface in Machine CAD

Wang Fujun; Ye Haijian(College of Water Conservancy and Civil Engineering, CAU) (CAD Center, CAU)  
The 3D surface can be defined directly by the boundary curve of the patch surface.The surface will be C1 continuous if the boundary curves connecting each two patches are C1 continuous. The complex calculation needed to control the parameters of surface can be avoided byusing the models presented in this paper. This new method is not dependent on any of surfacemodelling mechanism in CAD support software. Application examples are given and it has beenshown that this method has a very good universality.
【CateGory Index】: TH122
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 7 Hits
1 ZHANG Renhui YANG Junhu LIU Ti (School of Fluid Power and Control, Lanzhou University of Technology, Lanzhou 730050);NUMERICAL MODEL OF CENTRIFUGAL PUMP BLADE BASED ON ITERATION OF SURFACE[J];Chinese Journal of Mechanical Engineering;2006-10
3 Guo Xiaomei Wang Chunlin Yang Minguan Chen Shiliang;The Research and Development of the Pump CAD Software[J];Fluid Machinery;2003-03
4 GUO Xiao-mei1,LI Zeng-fang1,WANG Tie-liu1,ZHENG Qi-luan2(1.Zhejiang Water Conservancy and Hydropower College,Hangzhou 310028,China;2.Cangnan Farm Machine Managed Station,Wenzhou 325800,China);3D Modeling of Impeller in Inducer Which Based on Pro/E Wildfire Software[J];Coal Mine Machinery;2009-03
5 GUO Xiao-mei1,YANG Min-guan2,SHI Gao-ping1,WANG Ji3 (1.Zhejiang Water Conservancy and Hydropower College, Hangzhou 310028, China; 2.Jiangsu University, Zhenjiang 212013, China; 3.Hangzhou B-software Company, Hangzhou 310028, China);Accurate 3D Modeling of Impeller in Pumps Based on Pro/E Wildfire Software[J];Journal of Agricultural Mechanization Research;2006-08
6 Yang Fangfei Yan Chuliang(Chinese Academy of Agricultural Mechanization Sciences) Lin Hongyi(Jiangsu University);Principle and Application of 3D Modeling of Impeller Blade in Pump[J];Transactions of The Chinese Society of Agricultural Machinery;2003-01
Chinese Journal Full-text Database 1 Hits
1 Zhao Xiuwei;Sun Jiaguang(Dept. of Computer Tsinghua University Beijing 100084);A SMOOTH SURFACE BASED ON THE PATCH BOUNDARIES[J];JOURAAL OF COMPUTER AIDED DESIGN & COMPUTER GRAPHICS;1994-02
Chinese Journal Full-text Database 10 Hits
1 WANG Shi-dong~1,CHEN Yang~2,ZHANG Ben-fu~1,SUN Guang-ling~1,HUANG Xiao-mei~1(1.Technique center of modern education,Anhui Institute of Architecture & Industry,Hefei 230022,China;2.School of computer Science,Wuhan University,Wuhan 430079,China);The application of octrees in 3D modeling[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2006-06
2 WANG Shi-dong(Journal of Anhui Institute of Architecture & Industry,Hefei 230601,China);Application of Voronoi in surface reconstruction using GCS[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2007-05
3 WANG Shi-dong(Technique center of modern education,Anhui University of Architecture,Hefei 230022);An algorithm for stograge of cell of triangular meshes using Octree[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2008-05
4 JI Xue-yun (Department of Mathematics and Computer, Baoding Teachers College, Baoding 071 000, China);Application of Trigonometric Function on Pattern Elements Design[J];Journal of Baoding Teachers College;2005-02
5 JI Xue-yun1,LI Yi2(1.Department of Mathematics and Computer Science,Baoding University,Baoding 071000,China;2.Center of Experiment and Practice,Hebei Software Institute,Baoding 071000,China);Investigation and Discussion of Color-Design Systematic Based on RGB to HSB Transformation[J];Journal of Baoding Teachers College;2007-04
6 Li Hui Ding QimeiDepartment of Industrial Design and Information Engineering, Beijing Institute of Clothing Technology, Beijing 100029;The Reconstruction of 3-D Human Body Model Based on Continuous Boundary Curves[J];Journal of Beijing Institute of Clothing;2002-01
7 ZHANG Bing JIANG Bo XU Shu hua (College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing 100029,China);Die cave 3-D solid modeling[J];JOURNAL OF BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY;2001-04
8 Fu Baiwen (College of Information of BUU,Beijing 100101);Method for Normal Polygon[J];JOURNAL OF BEIJING UNION UNIVERSITY;1998-03
9 LI Chun yang,GUO Yong ming(Shenzhen Municipal Planning & Land Resource Information Center,Shenzhen 518031,China);The Application of Virtual Reality in Urban Planning[J];Science of Surveying and Mapping;2003-01
10 HU Shi yan (Dept.of Computer Science and Engineering of Beijing University of Aeronautics and Astronautics);The CAI implementation of computer graphics[J];Journal of Henan Urban Construction Junior College;2001-04
China Proceedings of conference Full-text Database 2 Hits
1 Wei Feng Guangxi Computing Centre,Nanning,Guangxi,530022,China;Algorithms of Image Noise Control in Bitonal Image[A];[C];2004
2 Wang Xiaojing Luo Yuetong Ji Hao VCC Division,School of Computer & Information,Hefei University of Technology,Hefei,230009;Research on Psysical Model Based Obstruction Avoiding Path Generation[A];[C];2008
Chinese Journal Full-text Database 10 Hits
1 LAI Xi-de 1, WANG Zhen-kai 2 (1 College of Machine, HUST. Wuhan 430074, China) (2 Department of Technics, Dongfang Dynamotor Stock let. Deyang 618000, China);Application of CAD/CAM in the Forming Technology for Hydraulic Turbine Blade[J];Ordnace Industry Automation;2000-04
2 LiDaoxiang Yuan Xiaohui Xu Jifang(Huazhong University of Science and Technology)(Wuhan Urban Construction Institute);The Geometric Modeling for Francis Turbine Blade[J];LARGE ELECTRIC MACHINE AND HYDRAULIC TURBINE;1998-03
3 Li\ Hua ( Dept. of Comput. Sci. and Eng., Dalian Univ. of Technol., China );All quadrilateral finite element mesh generation of 3D surfaces in CAD and method of locally adding mesh density[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1998-06
4 WANG Xi, SHI Dao yu, LUO Da li, QIAN Jia yu, ZHONG Xian xin(College of Optoelatronic Engineering,Chongqing University,Chongqing 400044,China);Analysis on Three -Dimensional Numerical Controlled Last Machining Algorithm[J];Journal of Chongqing University(Natural Science Edition);2000-05
5 GAO Chao, GUO Yong cai, HU Xue dong, GUO Xiao en (College of Opto electronic Engineering,Chongqing University,Chongqing 400044,China);Research on Shoelast CAD/CAM Technology[J];Journal of Chongqing University(Natural Science Edition);2000-06
6 WANG Xi, LUO Da li, SHI Dao yu, QIAN Jia yu, ZHONG Xian xin(College of Opto electronic Engineering,Chongqing University,Chongqing 400044,China);Applied Data Disposal Technology of Numerical Controlled Last Carving Machine[J];Journal of Chongqing University(Natural Science Edition);2001-04
7 ZHAO Jie, TAO Gui? bao, ZHANG Yi (College of Mechanical Engineering, Chongqing University,Chongqing 400044,China);Algorithm of Cutter Machining Position during Numerical Controlled Last Carving[J];Journal of Chongqing University(Natural Science Edition);2003-01
8 Xu Hongyuan(Department of Hydraulic Engineering, Tsinghua University);SOLID-LIQUID FLOW DESIGN PRINCIPLE ON SLURRY PUMP[J];Journal of Engineering Thermophysics;1992-04
9 Zhu Xinxiong;Zhang Xian( Beijing University of Aeronautics and Astronautics);THE TRENDS AND PROBLEMS OF SURFACE MODELING FOR CAD/CAM[J];JOURNAL OF ENGINEERING GRAPHICS;1994-02
10 Song Dejun Zhu Xinxiong Department of Manufacturing Engineering Beijing University of Aeronautics and Astronautics;SURFACE MODELING BY MATHEMATICAL PROGRAMMING[J];JOURNAL OF ENGINEERING GRAPHICS;1997-Z1
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 LUO Sheng(School of Mechanical & Electrical Engineering,Wenzhou University,Wenzhou 325035,China);Shoe-last measurer based on machine vision and contrast with other digitizers[J];Journal of Engineering Design;2007-01
2 ZHANG Ren-hui,YANG Jun-hu,LIU Yi(College of Fluid Power and Control,Lanzhou Univ.of Tech., Lanzhou 730050,China);Numerical design method of centrifugal impeller meridian plane[J];Journal of Lanzhou University of Technology;2007-04
3 QI Xue-yi,YAN Xiao-wei,ZHANG Qing(College of Fluid Power and Control,Lanzhou Univ.of Tech., Lanzhou 730050,China);3-D entity modeling of double-channel impeller based on Pro/Engineer[J];Journal of Lanzhou University of Technology;2008-01
4 QI Xue-yi1,JIANG Liang-rong1,ZHANG Xin-jie2,ZHANG Wen-jun1,JI Wei1(1.College of Fluid Power and Control,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.Jiangnan Electric Power Co.Ltd,Kashi844000,China);3-D modeling of Francis turbine blade based on PRO/E[J];Journal of Lanzhou University of Technology;2008-02
5 QIN Peng1,LI Na2(1.Electromechanical Department;2.Academic Service Section,Jining Vocational Technology College,Jining Shandong 272037,China);Study of Modeling For Reverse Engineering Based On Centrifugal Pump Impeller's Practicality[J];Equipment Manufacturing Technology;2009-07
6 HU Xiao-chun,WAN Xiao-jun,WANG Xi-jie,SHI Hao-liang(School of Machanical and Automobile Engineering,Hefei University of Technology,Hefei Anhui 230009,China);Parametric Design of Customized Shoe Last Based on CT Pictures of Foot[J];Journal of Engineering Graphics;2009-06
7 WANG Tao,YAN Jing,SONG Wen-wu(School of Energy and Environment,Xihua University,Chengdu 610039,China);Three-D modeling method of cylindrical blades of low specific speed centrifugal impellers[J];Journal of Lanzhou University of Technology;2010-02
8 Yan Junfeng, Chen Wei (Xi’an Aerospace Propulsion Institute, Xi’an 710100, China);Princple of digital modelling for low-specific-speed centrifugal pump impeller based on UG/Grip[J];Journal of Rocket Propulsion;2006-04
9 Wei Xiuting Department of Mechanical Engineering, Shandong University of Technology, Zhibo 255012, China.;Constraint modeling for the meridian passage in centrifugal impellers and its initial parameters[J];Journal of Huazhong University of Science and Technology;2002-05
10 FU Jian-jing,LI Zai-wei (Information College, Zheijiang University of Finances and Economics, Hangzhou, 310027,China);Principle and Application of Modeling of Complex Surface[J];Computing Technology and Automation;2004-02
China Proceedings of conference Full-text Database 1 Hits
1 Hu Xiaochun Wang Xijie Wan Xiaojun Shi Haoliang School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei,230009,China;Parametric Design of Customized Shoe Last Based on CT Pictures of Foot[A];[C];2008
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved