Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Transactions of the Chinese Society of Agricultural Engineering》 2012-13
Add to Favorite Get Latest Update

Modal analysis of bionic convex teeth rolling component composed of different materials

Zhang Zhihong1,2,Tong Jin1,2,Chen Donghui1,2,Sun Jiyu1,2,Ma Yunhai1,2(1.School of Biological and Agricultural Engineering,Jilin University(Nanling Campus),Changchun 130022,China;2.The Key Laboratory of Bionic Engineering(Ministry of Education,China),Jilin University(Nanling Campus),5988 Renmin Street,Changchun 130022,China)  
To investigate effects of bionic convex teeth rolling component composed of different materials,on adhesion-reducing and micro-basin processing performance,with the assist of Autodesk Algor Simulation software,modal analysis of rolling components made from cast iron material and UHMWPE-cast iron combinatorial material was performed.Using the anterior 8 ranks of modals,the natural frequency and maximum amplitude of the two types of rolling components were compared.It was found that at the anterior eight ranks of modal,the maximum amplitude at each ranks of UHMWPE-cast iron combinatorial material rolling component was higher than that of cast iron material,the increment was between 5.716 and 30.077 mm.Moreover,combinatorial material rolling component could reach higher amplitude at relatively lower natural frequency.Furthermore,near the center of the wheel disk,the average amplitude was 0.213 mm less than that of cast iron rolling component.The results show that compare with cast iron material rolling component,UHMWPE-cast iron combinatorial material rolling component can acquire the better adhesion reduction ability on the convex teeth,ensure the structural strength of the depressions on soil surface and have enhanced stability at the center of the wheel disk.These findings can give indications to the choice of materials for bionic convex teeth rolling component,speed setting for tractor and design of the excitation device on rolling components.
【Fund】: 国家自然科学基金资助项目(51075185)
【CateGory Index】: S222
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 Li Yaoming,Sun Pengpeng,Pang Jing,Xu Lizhang(Key Laboratory of Modern Agricultural Equipment and Technology,Ministry of Education and Jiangsu Province,Jiangsu University,Zhenjiang 212013,China);Finite element mode analysis and experiment of combine harvester chassis[J];Transactions of the Chinese Society of Agricultural Engineering;2013-03
2 Chen Liqing1,2, Zhang Dong2, Chen Wuwei1, Hu Fang1, Huang Minfeng3 (1. School of Mechanical and Automobile Engineering, Hefei University of Technology, Hefei 230009, China; 2. College of Engineering, Anhui Agricultural University, Hefei 230036, China; 3. Hefei Axle Transmission System and Chassis Automobile Co., Ltd, Hefei 230000, China);Lightweight design of differential case based on particle swarm optimization algorithm[J];Transactions of the Chinese Society of Agricultural Engineering;2013-09
Chinese Journal Full-text Database 10 Hits
1 HAN Zhi-wu,L You,DONG Li-chun,ZHANG Jun-qiu,NIU Shi-chao,MA Rong-feng,REN Lu-quan(Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University,Changchun 130022,China);Modal analysis of gear with bionic surface morphology[J];Journal of Jilin University(Engineering and Technology Edition);2010-06
2 GUO Yingjie, LIYunfei, YUAN Yueming, LUAN Yuzhen, WANG Shijun (College of Engineering Technique,Jilin Agricultural University,Changchun 130118);Effect of Rolling in Spring Seeding Time on the Moisture Content of Light Chernozem Soil[J];JOURNAL OF JILIN AGRICULTURAL UNIVERSITY;1999-02
3 LIU Guang-qin1,ZHANG Jin-hong2,YU Qing-rong3,JIANG Mou-yu2,HUANG Jun-you3,SHA Guo-dong1, LU Yu-ning1 (1.Institute of Vegetable Crops,Jiangsu Academy of Agricultural Sciences,Nanjing 210014,China;2.Scientific Technology Promotion Center of Ministry of Water Resources,Beijing 100044,China; 3.Hydraulic Sciences Research Institute of Jiangsu Province,Nanjing 210014,China);Effect of Soil-compacting and Water-saving Irrigation on Rice Growth and Soil Biological Activities[J];Jiangsu Journal of Agricultural Sciences;2008-03
4 Qiu Lichun Li Baofa (College of Agricultural Engineering, Shenyang Agricultural University, Shenyang 110161);Experimental Study on the Self Excited Vibration Subsoiler for Reducing Draft Force[J];Transactions of The Chinese Society of Agricultural Engineering;2000-06
5 Qin Sicheng 1, Chen Yuesun 1, Li Zhong 2, Dai Peiqing 2, Bai Du 2 (1.Mechanical College, Jilin University, Changchun 130025, China; 2.Inner Mongolia North Heavy Industries Group Corp Ltd, Huhhot 130025, China);Dynamic Study on the Soil Compaction by Vibratory Roller[J];Transactions of The Chinese Society of Agricultural Engineering;2001-04
6 Wen Dijiang~1, Zhang Li~2, Zhang Heng~3(1.School of Material and Engineering, Suzhou University, Suzhou 215021, China;2.School of Mechanics and Automation, Beijing Technology and Business University, Beijing 100037, China;3.College of Mechanical and Electronic Engineering, Zhengzhou University, Zhengzhou 450002, China);Modal experiment and analysis of resin based composite engine block[J];Transactions of The Chinese Society of Agricultural Engineering;2005-02
7 Zhong Jiang,Qiao Xin,Wang Yangyu,Zhao Zhangfeng,Zhang Xian(Key Laboratory of Mechanical Manufacture and Automation,Ministry of Education, Zhejiang University of Technology,Hangzhou 310014,China);Fast and accurate obtaining modal model for designing agricultural machinery[J];Transactions of the Chinese Society of Agricultural Engineering;2010-01
8 Zhang Haiying,Liao Jianyong(College of Architecture and City Planning,Hunan City University,Yiyang 413000,China);Soft-sensing model on vibration cutting resistance from rock and soil based on improved fuzzy neural networks theory[J];Transactions of the Chinese Society of Agricultural Engineering;2010-06
9 Quan Longzhe1,2,Tong Jin1,Zeng Baigong1,Chen Donghui1(1.Key Laboratory of Bionic Engineering,Ministry of Education,Jilin University,Changchun 130012,China;2.College of Engineering,Northeast Agricultural University,Harbin 150030,china);Finite element mode analysis and experiment of corn stubble harvester[J];Transactions of the Chinese Society of Agricultural Engineering;2011-11
10 Li Xia 1,2,Fu Junfeng 1,Zhang Dongxing 1,Cui Tao 1,Zhang Rui 1(1.College of Engineering,China Agricultural University,Beijing 100083,China;2.College of Mechnical and Electrical Engineering,ShiHeZi University,ShiHeZi 832003,China);Experiment analysis on traction resistance of vibration subsoiler[J];Transactions of the Chinese Society of Agricultural Engineering;2012-01
Chinese Journal Full-text Database 10 Hits
1 He Zhimin, Zhang Dalun, Zhang Wenshuan, Li Jie, Luo Yunjun (Department of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China);STUDY ON PPS/PA6 ALLOYS[J];Engineering Plastics Application;2005-01
2 Lü Guiying~ 1 ,2 , Zhu Hua~ 1 , Feng Xuesong~1, Lin An~ 1 , Gan Fuxing~ 1 (1.College of Resource and Environmental Science, Wuhan University, Wuhan 430072, China; 2.School of Chemical and Material Engineering, Huangshi Institute of Technology, Huangshi 435000, China);THE EFFECT OF ENVIRONMENTAL MOISTURE ON THE MECHANICAL PROPERTIES OF POLYAMIDE AND ITS MICROMECHNISM[J];Engineering Plastics Application;2006-08
3 Cheng Yehua1,2,Li Yunyong3,Liu Ying1(1.Kaifeng Longyu Chemical Co.Ltd.,Kaifeng 475200,China;2.Nanjing University of Technology,Nanjing 210009,China;3.State Key Laboratory of Polymer Materials Engineering of China,Sichuan University,Chengdu 6100065,China);DEVELOPMENT AND APPLICATION OF POM PRODUCT AT DOMESTIC AND OVERSEAS[J];Engineering Plastics Application;2009-09
4 Lei Youan1,Zeng Fandi2,Liu Lihua1,Xiong Chuanxi3(1.Department of Chemistry and Chemical Engineering,Henan University of Urban Construction,Pingdingshan467036,China; 2.School of Chemistry & Chemical Engineering,Huazhong University of Science and Technology,Wuhan430074,China; 3.School of Materials Science and Engineering,Wuhan University of Technology,Wuhan430070,China);STUDY ON MOLDING OF THE PC THICK BOARD[J];Engineering Plastics Application;2011-08
5 Shen Jingqiang,Liu Zhenhua,Zhu Quan,Jiang Wenzhen(Guangzhou Honsea Chemistry Co.Ltd.,Guangzhou 510530,China);Research of Core-Shell Structure Methyl Methacrylate-Butadiene-Styrene Plastic on Toughening of Polycarbonate[J];Engineering Plastics Application;2012-02
6 XU Ning et al(Xishuangbanna Tropical Botanical Garden,Chinese Academy of Sciences,Kunming,Yunnan 650223);Comparative Studies on Soil Bulk Density and Underground Roots Biomass under Different Land Use Types in Northwestern Yunnan Province[J];Journal of Anhui Agricultural Sciences;2008-05
7 ZHANG Lu et al(Key Laboratory of Bionics Engineering of MOE,School of Biological and Agricultural Engineering,Jilin University,Changchun,Jilin 130022);Research Advances of the Vibrating Subsoiler[J];Journal of Anhui Agricultural Sciences;2011-27
8 HUANG Hua, JIAO An chao (School of Vehicle & Transportation Engineering,Beijing Institute of Technology,Beijing 100081,China);Application of No-Contact Measuring by Laser in Modal Analysis of the oil-box of the Vehical[J];Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine;2002-02
9 MA Bing-jie, FENG Hui-hua, LIAO Ri-dong, YAO Li-min (School of Mechanical & Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Modal Analysis of Engine Structure Based on the Modal Correlation and Model Modification[J];Vehicle & Power Technology;2006-02
10 CAO Kan,WANG Yang,WANG Yu(School of Engineering Science,University of Science and Technology of China,Hefei 230027,Anhui,China);Experimental Study on Impact Tensile Properties of Polycarbonate at Low Temperature[J];Acta Armamentarii;2010-S1
China Proceedings of conference Full-text Database 1 Hits
1 Liu Xingang,Zeng Ming,Zhang Yeming,Hu Li ( College of Materials Science and Engineering,Xihua University,Chengdu 610039);Study on friction and wear properties of PPS composite[A];[C];2010
Chinese Journal Full-text Database 10 Hits
1 SHEN Xiu-min,DIAO Jin-dong,LI Jin,WANG Yong,QIU Bin(China Automobile Engineering Research State Key Laboratory of Vehicle NVH andSafety Control,Chongqi 400039,China);Finite Element Modal Analysis of Car Roof Panel[J];Vehicle & Power Technology;2011-02
2 WANG Xian-hui1,XU Gang1,LI Shou-cheng1,BAO Ji-ying2(1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu,China;2.Institute of Ordnance Science and Technology,Beijing 100089,China);Research of Topology Optimization in the Design of the Chassis Frame of Special Vehicles[J];Acta Armamentarii;2007-08
3 LUO Hong-qi1,GAO Huan-wen2(1.College of Mechanical and Automation Engineering,Beijing Technology and Business University,Beijing 100037,China;2.College of Engineering,China Agricultural University, Beijing 100083,China);STUDY ON COMBINED PRESS FOR PERMANENT RAISED BEDS PLANTER[J];Journal of Beijing Technology and Business University(Natural Science Edition);2008-03
4 YU Qi-zhi,CHEN Dan-ye,CHEN Yan(Advanced Vocational Technical College,Shanghai University of Engineering Science,Shanghai 200437,China);Comparison of Modal Analysis for Vehicle Body by Finite Element and Test[J];Journal of Donghua University(Natural Science);2011-04
5 HE Cheng-xiu~(1),WANG Fen-e~(1),GUO Wei-jun~(2),LIU Cong-zhen~(1)(1.College of Engeering,Gansu Agricultural University,Lanzhou 730070;2.Lanzhou Poly-technical College,Lanzhou 730050,China);Dynamic analysis on vibration system of self-walking combine harvester[J];Journal of Gansu Agricultural University;2006-04
6 CHEN Jian-en1,GUO Wei-jun2,WANG Fen-e1,LIU Peng-xia1(1.College of Engeering,Gansu Agricultural University,Lanzhou 730070,China;2.Lanzhou Poly-technical College,Lanzhou 730050,China);Analytic model of transverse vibration law of wheat combine driver base[J];Journal of Gansu Agricultural University;2009-06
7 REN Pei-hong~1, WEI Zhong-liang~2, WANG Qi-yun~1(1.Automobile Development Technology Center, Anhui Jianghuai Automobile Co. Ltd., Hefei 230022, China; 2.Machinery and Automobile Engineering, Hefei University of Technology, Hefei 230009, China);Finite element analysis of HFC6100KY bus chassis frame[J];Journal of Hefei University of Technology(Natural Science);2005-08
8 DENG Chun-xiang1,XIANG Jian-hua1,TAO Dong-cai1,ZHANG Lan1,DENG Xiao-hong2(1.College of Engineering and Technology,HNAU,Changsha 410128,China;2.Occupation Technical College,Chenzhou,Hunan 412725,China);Optimize on Working Parameters Crank Rolling Velocity and Radius of the Vibration Sieve about Cereal Cleaning Windmill[J];Journal of Hunan Agricultural University(Natural Sciences);2006-02
9 JIANG Tao1,ZHANG Xian1,QIAO Xin1,ZHANG Jing2,JIANG Jian-dong1(1.The MOE Key Laboratory of Mechanical manufacture and Automation,Zhejiang University of Technology, Hangzhou 310014,China;2.Yancheng Agri-machinery Research Institute,Yancheng 224002,China);3-D numerical simulation and optimization of soil cutting tool based on SPH[J];Mechanical & Electrical Engineering Magazine;2009-06
10 YU Jian qun 1, MA Cheng lin 1, YANG Hai kuan 2, MA Xu 1 (1.College Mechanical Science & Engineering,Jilin University of Technology,Changchun 130025,China; 2.Jilin Agricultural Machinery Testing Center,Changchun 130062,China);Study on the Cell of Combination Inner cell Corn Precision Seed metering Device[J];JOURNAL OF JILIN UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION);2000-01
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 Chen Liqing1,2, Zhang Dong2, Chen Wuwei1, Hu Fang1, Huang Minfeng3 (1. School of Mechanical and Automobile Engineering, Hefei University of Technology, Hefei 230009, China; 2. College of Engineering, Anhui Agricultural University, Hefei 230036, China; 3. Hefei Axle Transmission System and Chassis Automobile Co., Ltd, Hefei 230000, China);Lightweight design of differential case based on particle swarm optimization algorithm[J];Transactions of the Chinese Society of Agricultural Engineering;2013-09
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 GENG Xin~1,SHA Fei~1,LI Yun-zhi~2(1.School of Electronics and Information Engineering,Beijing Jiaotong University,Beijing 100044,China;2.Helicomm(Beijing) Inc.,Beijing 100085,China);Sensor Application Design for Wireless Personal Area Networks[J];Journal of Northern Jiaotong University;2005-05
2 Zhang Li (Dept. of Machine Design Eng., Luoyang Institute of Technology, Luoyang, 471039) Zhang Heng Wen Dijiang (Zhengzhou University) (Suzhou University);DEVELOPMENT OF COMPOSITE ENGINE BLOCKS FOR AUTOMOBILES[J];ACTA ARMAMENTARII;1999-02
3 YU Yan, LI Hong-wei, Ou Jin-ping(School of Civil Engineering, Harbin Inst of Technology, Harbin 150090, China);Design and Development of Wireless Acceleration Sensor Applied to Civil Engineering Structure Monitoring[J];Journal of Transcluction Technology;2004-03
4 ;Realizing A Low Power Consumption Wireless Sensor Network[J];Sensor World;2007-05
5 HE Wen-hua1,2,LI Chun-sheng3,ZHAO Yan-ming4 (1.Department of Computer Science,Hunan Institute of Humanities,Science & Technology,Loudi 417000,China;2.School of Information Science and Engineering,Central South University,Changsha 410083,China;3.School of Electrical and Information Engineering,Hunan University,Changsha 410082,China;4.School of Information and Electrical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China);Fuzzy control strategy for temperature in the tunnel kiln based on the adaptive particle swarm optimization algorithms[J];Journal of Railway Science and Engineering;2008-02
6 Tan Jun;Compacting Principles and Application of Vibration Rollers[J];Northeastern Highway;2003-03
7 Qiu Jibao Wang Jianmin Tan Zhiyong(Beijing Institute of Strength & Environmental Engineering,Beijing,100076);Some New Techniques for Structural Dynamic Analysis of Launch Vehicle[J];Missiles and Space Vehicles;2001-02
8 ZHANG Li-xia,WANG Wen-yong,LI Jiong (Information Center, UEST of China Chengdu 610054);Research of Object Location by Wireless Sensor Network[J];Journal of University of Electronic Science and Technology of China;2006-02
9 YAN Shi-rong 1, WEN Bang-chun 1 (1. Departemet of Mechanical Engineering, Fuzhou University, Fuzhou, Fujian 350002, China; 2. College of Mechanical Engieering and automation, Northeastern University, Shenyang, Liaoning 110006, China);Investigation of characteristics of one kind of nonlinear dynamics of a vibratory roller[J];JOURNAL OF FUZHOU UNIVERSITY(NATURAL SCIENCES EDTION);2000-05
10 YANG Dong-lai~1, SUN Zu-wang~1, CHEN Biao~2, HUANG Hong-tao~2 (1.College of Construction Machinery, Chang'an Univercity, Xi'an 710064,China; 2.Hubei High & Technology Traffic Engineering Consulation Co.LTd,Wuhan 430051,China);Comparison of compaction test between oscillatory compaction and vibratory compaction[J];Chinese Journal of Construction Machinery;2005-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved