Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Energy Research and Information》 2000-02
Add to Favorite Get Latest Update

A New Method of Determining the Convective Heat-Transfer Coefficient

Rong-Hua Zhang and Heng-Jing Nie (Hefei University of Technology, Hefei 230009)  
The convective heat-transfer coefficient is one of the important parameters with which the problem of heat conduction accompanied by convection can be solved. In order to acquire the temperature pattern in machine parts, the convective heat-transfer coefficient on the surfaces of machine parts ought to be determined. In this paper, a new method was presented with which the convective heat-transfer coefficient can be determined accurately. Experiments for determining the convective heat-transfer coefficient were carried out and described in detail. Based on the mathematical analysis of heat-transfer problems―the lumped parameter analysis of unsteady-state heat conduction solutions, the convective heat-transfer coefficient was determined under given conditions. The influence of various parameters on the measuring accuracy of the convective heat-transfer coefficient was analyzed quantitatively. This new method has proved itself to be convenient and of high accuracy (with a relative error smaller than 1.6%).
【CateGory Index】: TK124
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 3 Hits
1 LI Li-ming,WANG Dao-yuan,DANG Jun,LIANG Jiang-min(Nanjing Iron and Steel Combine Ltd.,Nanjing 210035,China);The Confirm on the Convective Heat Exchange Coefficient of Wide Thick Plate Temperature Field[J];Gansu Metallurgy;2010-06
2 LI Cheng wei, LI Chao hui, DAI Jing min, CHEN Shou ren ( School of Electrical Engineering & Automation, Harbin Institute of Technology,Harbin 150001, China);Development and calibration of thermal gas mass flowmenter for pipe gas[J];Journal of Harbin Institute of Technology;2002-03
3 Du Zhilong~1 Gao Zhenjiang~(1*) Zhang Shixiang~2 1.College of Engineering,China Agricultural University,Beijing,100083,China; 2.College of Food Science & Nutritional Engineering,China Agricultural University,Beijing,100083,China;Research on convective heat transfer coefficient with air jet impinging[J];Transactions of the Chinese Society of Agricultural Engineering;2006-S2
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Li Na, Ma Xiu-shui, Li Gui-hua;An Overview of Uncertainty in Measurement and Evaluation of Measurement Uncertainty[J];Journal of Anhui Vocational College of Electronics & Information Technology;2008-03
2 MA Qiang1,XU Zhen-ying 2 (1.Dept.of Rail Trans.,the Corporation of Huaibei Mining Group,Huaibei235000,China;2.Dept.of Prec.Ins.,Hefei University of Technology,Hefei 230009,China);The tracing of dynamic measurement e rrors[J];Journal of Anhui Institute of Mechanical and Electrical Engineering;2001-04
3 YANG Shu ming 1,ZHU Qiang 1,ZHAO Ze xiang 2,JIANG Zhuang de 1 (1. State Key Lab for Manufacturing Systems,Institute of Precision Engineering,Xi’an Jiaotong University,Xi’an710049,China; 2. Zhongyuan Institute of Technology,Zhengzhou450007,China);Study on judging the initial contact point in nanoindentation[J];Micronanoelectronic Technology;2003-Z1
4 ZHAO CUIJI (Department of Engineering);ANALYSIS AND CORRECTION OF THE MEASURING ERROR IN THE UNIVERSAL LENGTH -MEASURING INSTRUMENT[J];Journal of North China University of Technology;1989-01
5 YU Jie(School of Civil Engineering and Architecture, Northern Jiaotong University, Beijing 100044,China);Curve-Simulating of the Circulating Pump in Heat Supply Network[J];Journal of Northern Jiaotong University;2002-06
6 Wang Qilin;Li Jianyong;Zhao Yongwei(Department of Mechanical Engineering,Northern Jiaotong University,Beijing 100044);The Research on Indirect Measurement for Large Diameter[J];JOURNAL OF NORTHERN JIAOTONG UNIVERSITY;1995-02
7 Sun Yirong; Lu Minghc; Dai Yimei(Iron & Steel Research Institute);Measurement of Temperature Distribution Inside Roll's Surface Layer in Dual Frequency Hardening Process[J];BAO STEEL TECHNOLOGY;1994-05
8 LI Yu-hui, GUO Qun-shan (Dept. of Missile Engineering, Institute of Ordnance Engineering, Shijiazhuang 050003, China);Data Error Analysis under VC++[J];Ordnance Industry Automation;2004-02
9 Zhao Yaohua Ma Chongfang(Department of Thermal Engineering);Analytical Study of Heat Transfer with Single Circular Free Jets under Arbitrary-heat-flux Conditions[J];Journal of Beijing Polytechnic University;1989-03
10 TANG Xiao-yan, YUN Zhong, GAO Zhi ( College of Electromechanical Engineering, Central-South University, Changsha 410083, China );Study on the External Cooling Mechanism of Aluminium's High-speed Cast-rolling Process[J];Journal of Beijing Polytechnic University;2002-03
China Proceedings of conference Full-text Database 10 Hits
1 Feng Yao Guo Li Xin E Ma Tie Hua(North China University of Science and Technology,shanxitaiyuan,030051);The evaluation of Uncertainty about The Pressure Dynamic Test System[A];[C];2007
2 Zhu Zixin Wang Yiliang Chen Dong Zhang Jing Zhu Chunyang (Oil Monitoring Center of Aviation Equipments,Beijing 100070,China);Study on Comparison Calibration Method for Metal Content Measuring in Lubrication Oil[A];[C];2007
3 Song Mingshun Wang Wei Chen Yihua Gu Longfang Tao Jingxuan (China Jiliang University,Hangzhou 310018,China);Comment on the evaluating methods of measurement uncertainty and research on their progress[A];[C];2007
4 Wang Xiaofei Zhang Hui Feng Yan(1 School Of Instrument Science And Opto-electronic Engineering,Hefei University of Technology,Hefei 230009,China;2 Dept.Of Mathematics & Physics,Anhui Institute Of Architecture &.Industy,Hefei 230601.China);High precision temperature measurement system using analog comparator[A];[C];2007
5 Han Youjun Wang Xiaolei Wang Jian (Institute of Meteorology,PLA Univ.of Sci.& Tech.,Nanjing 211101,China);Analysis of the comparative experiment on radiation performance[A];[C];2007
6 Lv Jianbo1,2 Liao Haiyang1,2 Hou Changjun3 Zhu Bin1 2 (1 Key Laboratory of Opto-electronic Technology and Systems of the Education Ministry,Chongqing University,Chongqing; 400030; 2 Microsystem Research Center, Colledge of OptoElectronic Engineering, Chongqing University, Chongqing 400030 3 Bioengineering College of Chongqing University, Chongqing 400030);Design of an Embedded Gas Detector Based on Spectral Analysis[A];[C];2008
7 Liang Yuanhua Yuan Bingcheng (Department of Weaponry Engineering Naval University of Engineering Wuhan 430033 China);Design of a torpedo receiver weak-signal intelligent measuring instrument[A];[C];2008
8 Shen Xianqing~(1,2) Fu Jiacai~2 Ren Dianyi~3 Wang Chengyuan~1 (1.Electric Engineering apartment,Shenyang University of industry Shenyang 110023 China; 2.Electric and Information Engineering apartment Heilongjiang Institute of Science and Technology Harbin 1150027 China; 3.Harbin Research Institute of Electrical Instrumentation Harbin 150040 China);The design of a single phase Watt-hour meter with long-distance automatic meter and reading[A];[C];2008
9 Zhao Yan Zhang Hui (School of Instrumentation, Hefei University of Technology, Hefei 230009, China);Accurate Measurement of Electromotor Coil Resistance in Testing Water Pump[A];[C];2005
10 Chen Xiaohuai Bo Xiaojing Wang Hongtao (School of Instrument and Instrumentation, Hefei University of Technology, Hefei 230009, China);The Evaluation of Combined Uncertainty Based on the Theory of Monte Carlo[A];[C];2005
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Tian Hui\ Sun Bing\ Gu Hongxia(School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Computation of cryogenic propellant discharge under zero gravity conditions[J];Journal of Beijing University of Aeronautics and Astronautics;2004-07
2 BI Chongwu,HE Yong,LIU Xuefeng,XIE Jianxin School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Thermo-mechanical coupling analysis in the dieless drawing process of NiTi shape memory alloy wires[J];Journal of University of Science and Technology Beijing;2008-11
3 Zuo Zhengxing;Zou Wensheng;Liao Ridong Schoo1 of Vehicular Engineering, Beijing Institute of Technology,Beijing 100081;A Study on a CAD System for the Engine Crank Shaft[J];Journal of Beijing Institute of Technology;1997-02
4 Xu Helin Wu Wenfei①China Nonferrous Metal Construction Conglomerate Company,Beijing 100038,China①Department of Environment Envgineering,UIST Baotou,Baotou 014010, China;Convective heat transfer coefficient analysis of inner wallsof an airconditioned room with a concentrated heat source[J];JOURNAL OF BAOTOU UNIVERSITY OF IRON AND STEEL TECHNOLOGY;1998-02
5 CHEN Yu~1,KANG Da-chang~1,JIN Xiao-ou~2(1.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China,2.School of Architectural Engineering,Heilongjiang University,Harbin 150086,China);FEM coupled thermal simulation of warm shear spinning of cone workpiece of titanium alloy[J];Materials Science and Technology;2006-01
6 ZHANG Weikai LI Naizhe HE Deping~(**) (Department of Material Science and Engineering,Southeast University,Nanjing 210096);Inversion analysis of volumetric heat transfer coefficient for porous aluminum[J];Chinese Journal of Materials Research;2007-01
7 CAI Xiao-hui 1, ZHANG Dian-hua 1, ZHANG Zhong-ping 2, WANG Guo-dong 1 (1. State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China; 2. PG HSM, Panzhihua 617062, China.;Mathematical Model of Hot Strip Laminar Cooling System[J];JOURNAL OF NORTHEASTERN UNIVERSITY;2003-02
8 Tang Jinglin; Zhan Liwei;Nie Shaomin(The College of Mechanical Engineering ,Yashan University,Qinhuangdao 066004);Numerical Simulation of Hydraulic Counter Pressure Drawingof Conical Part[J];JOURNAL OF YANSHAN UNIVERSITY;1999-03
9 Fang Xiuhua Zhang Wenjing Zou Bo (Institute of Command and Technology of Equipment,Beijing,101416);Seeking for Development Strategy of Launch Vehicle by the Experiences of the Launch Vehicle Development in America[J];Missiles and Space Vehicles;2003-01
10 Peng Weibin Wu Delong Li Haiyang(Beijing institute of Astronautical systems engineering, Beijing 100076);Heat Transfer Analysis of Cryogenic Propellant Tank Thermal Protection System for Reusable Vehicles[J];Missiles and Space Vehicles;2003-06
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 Du Zhilong1,Gao Zhenjiang2,Wen Zhaohui3,Li Fengcheng1,Zhao Donglin1 1.Chinese Academy of Agricultural Mechanization Sciences(Beijing 100083)2.College of Engineering,China Agricultural University(Beijing 100083)3.Academy of State Administration of Grain(Beijing 100037);Experimental study of blanching and drying of carrots in air-jet impingement oven[J];Cereal & Food Industry;2010-01
2 E Jia-qiang~(1,2),ZHANG Hua-mei~1,GONG Jin-ke~1,WANG Yao-nan~2(1.School of Mechanical and Automotive Engineering,Hunan University,Changsha 410082,China;2.School of Electrical and Informational Engineering,Hunan University,Changsha 410082,China);Measurement system for gas flux in pipeline based on function chain neural network[J];Journal of Central South University(Science and Technology);2006-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved