Full-Text Search：
《Automobile Technology》 2004-05

## Experimental Study on Milling Force of Stainless Steel Round Head

Li Yancong1,Niu Wentie2,Zhang Weiyu1(1.Tianjin Agricultural College;2.Tianjin University)
Milling tests for stainless steel are carried out with the multi-factors orthogonal test method.With the force measuring system,milling force of the ramp round-head milling cutter of casting stainless steel is measured,and the empirical equation for evaluating the milling force of casting stainless steel Cr1Ni18Ti9 is concluded,and its validity is verified.The equation can be used to evaluate the milling force of selected milling parameters in advance,so as to avoid cutter damages resulting from oversized milling force.The equation can also be used as a reference for milling cutter design and optimized selection of stainless steel milling parameters.
【CateGory Index】： TG54
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
 【References】
 Chinese Journal Full-text Database 3 Hits
 1 QIN Xu-da~1 ZHAO Jian-bo~1 ZHANG Jian-gang~1 LIU Huan-ling~1 Tom O Muller~2 Ni Wang-yang~2 Liu Yi-xiong~2 1.School of Mechanical Engineering,Tianjin university Tianjin 300072,China; 2.Kennametal Inc.Latrobe,PA 15650,USA;Analysis and Modeling About Milling Force in Plunge Milling for Ti-6AI-4V Based on Regression[J];Journal of Beijing University of Technology;2006-08 2 QI Wen-guo~(1,2),SUN Jian-jun~2,ZHAO Jian-bo~1,QIN Xu-da~1(1.School of Mechanical Engineering,Tianjin Univ.,Tianjin 300072,China;2.School of Mechanical and(Electronic) Engineering,Tianjin Polytechnic University,Tianjin 300160,China);A Mathematical Model and Analysis of Plunge Milling Force on Aluminum Alloy[J];Modular Machine Tool & Automatic Manufacturing Technique;2007-01 3 TIAN Jingyun①, TIAN Weijun②, LI Yu③ (①Shaanxi University of Technology, Hanzhong 712003, CHN; ②Northwestern Polytechnical University, 712072, CHN;③Xi’an Shiyou University, Xi’an 710068, CHN);A Mathematical Model and Analysis of Plunge Milling Force on Aluminum Alloy[J];Manufacturing Technology & Machine Tool;2009-01
 【Citations】
 Chinese Journal Full-text Database 1 Hits
 1 Ren Bingyin Liu Huaming;Research on the Key Problems of 5-axis NC Machining of Free Curved Surfaces[J];MODULAR MACHINE TOOL & AUTOMATIC MANUFACTURING TECHNIQUE;1998-08
 【Co-citations】
 Chinese Journal Full-text Database 5 Hits
 1 YUAN Jun,SUN Ling-yu(School of Traffic Science and Engineering,Beihang University,Beijing 100191,China);Optimization of Hierarchical Energy Absorbers Based on Response Surface Method[J];Journal of Chongqing University of Technology(Natural Science);2010-04 2 HUANG Feng1,2,YU Lu1,LIU Jing1,LI Xiao-gan1,2,LV Xiao-long11.Key Laboratory of Ferrous Metallurgy and Resources Utilization of Ministry of Education,Wuhan University of Science and Technology,Wuhan 430081;2.Corrosion and Protection Center,School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083;Relative Function of Influence Factors on Pitting Sensitivity of X70 Steel in a Simulated Soil Solution[J];Corrosion Science and Protection Technology;2010-03 3 LUO Ji-hui(Panyu Chu Kong Steel Pipe Co.,Ltd.,Guangzhou 511450,China);Determination of the Influence of the Bend's Geometric Parameter of the Amount of Deformation with an Orthogonal Testing Method[J];Pipeline Technique and Equipment;2010-04 4 YIN Jin-jie,DAI Ying-hua(Institute of Material,Liaoning University of Engineering and Technology,Fuxin 123000,China);Study on Phenolic Foam Toughing Modification and Influence of Filler on the Properties[J];Shanghai Plastics;2010-02 5 HU Si-jie1,HU Xin1,JIANG Xiao-bing2(1 National Engineering and Technology Research Center for High Efficiency Grinding,Hunan University,Changsha 410082,China;2 Shenzhen Research Institute,Hunan University,Shenzhen 518057,Guangdong,China);Optimization analysis of CMFD's geometrical parameters for drilling hardened steel based on orthogonal design of experiments[J];Modern Manufacturing Engineering;2010-07
 【Co-references】
 Chinese Journal Full-text Database 10 Hits
 1 QIN Xu-da~1 ZHAO Jian-bo~1 ZHANG Jian-gang~1 LIU Huan-ling~1 Tom O Muller~2 Ni Wang-yang~2 Liu Yi-xiong~2 1.School of Mechanical Engineering,Tianjin university Tianjin 300072,China; 2.Kennametal Inc.Latrobe,PA 15650,USA;Analysis and Modeling About Milling Force in Plunge Milling for Ti-6AI-4V Based on Regression[J];Journal of Beijing University of Technology;2006-08 2 LI Dong-yuan1,2,YAN Xiu-sheng2,ZHANG Xiao-guang2, HOU Lan-tian1,ZHOU Gui-yao1 ( 1. Infrared Optical Fibers & Sensors Institute, Yanshan University, Qinhuangdao 066004, China; 2. The Northeast Research Institute of Electronic Technology, Jinzhou 121000, China );Design of hybrid refractive-diffractive lens for large section imaging fiber bundle[J];Opto-Electronic Engineering;2006-05 3 LI Shen yi,DAI Yi fan,PENG Xiao qiang (College of Mechatronics Engineering and Automation, National Univ.of Defense Technology, Changsha 410073,China);Ultra-precision Machine Tools and Development of the Latest Technology[J];JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY;2000-02 4 Zhou Huiling et al;Optimization of Cutting Tool Processing Parameters in High speed Cutting[J];Tool Engineering;2001-06 5 Sun Junlan et al;Difficult Problems and Countermeasures in Superfine Cutting[J];Tool Engineering;2001-11 6 Liu Zhanqiang Huang Cuanzhen Wan Yi et al;Summary of Cutting Temperature Measurement Methods[J];Tool Engineering;2002-03 7 Yang Qiuping Wang Weiping;Comparative Study on Different Modeling Methods for Predicting Cutting Force[J];Tool Engineering;2002-12 8 Sun Jianghong Yao Wenxi Wu Pingliang;UG-based 3D Parametric Design of Helical Gears by Swept Molding Method[J];Tool Engineering;2003-02 9 Chen YongLiu Xiongwei;Computer Aided Design of Process Parameters and Cutter Geometrical Parameters in Peripheral Milling[J];Tool Engineering;2003-11 10 Li Zhi Ma Yong;Study of Lapping Technique for Diamond and Reconstruct of Lapping Machine[J];Tool Engineering;2004-03
 【Secondary References】
 Chinese Journal Full-text Database 5 Hits
 1 WANG Bo1,2,LIU Xian-li2,DU Jin-cheng1,XU Lei1,YUE Cai-xu2(1.Harbin Electric Machinery Company Limited,Harbin 150040,China;2.Harbin University of Science and Technology,Harbin 150080,China);Research on Integral CNC Machining Process and Programming Technology for Runner of Pelton Turbine[J];Large Electric Machine and Hydraulic Turbine;2010-03 2 Yang Zhenchao,Zhang Dinghua,Yao Changfeng,Ren Junxue,Tian Weijun(Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xi'an 710072,China);Sensitivity Analysis of Parameters Affecting Milling Force in Plunge Milling of Titanium Alloy TC11[J];Acta Aeronautica Et Astronautica Sinica;2009-09 3 ;Analysis and Modeling of Plunge Milling Force on PH13-8Mo[J];Aeronautical Manufacturing Technology;2010-05 4 LI Tian1,CHEN Wu-yi1,CHEN Cai-hong2(1.School of Mechanical Engineering &Automation,Beihang University,Beijing 100191,China;2.Changzhou LAN XIANG Machine Works,Changzhou 213022,China);Rough machining method for blisk plunge milling[J];Computer Integrated Manufacturing Systems;2010-08 5 Ren Junxue Tian Weijun Yao Changfeng Jiang Zhennan The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xi'an,710072;Experimental Study on the Overall Structure of Titanium Alloy with High-effect Plunge Milling Process[J];China Mechanical Engineering;2008-22
 【Secondary Citations】
 Chinese Journal Full-text Database 2 Hits
 1 Yu DaoyuanDept.of Mech.Engin.I),H.U S .T. ,Wuhan 430074,China).;Duan Zhengcheng;Zhong Jianlin;Li Peigen;A Method for Calculating the Flat-End Milling Cutter Path Generated from Convexly Sculptured Surfaces[J];JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY;1994-02 2 Zhong JianlinCollege of Mech.Sci.& Eng.,H.U.S.T. ,Wuhan 430074,China.; Deng Jianchun; Duan Zhengcheng; Yu Daoyuan;Automatic Generation of the Flat End-Cutter Path during Machining of Convexly Sculptured Surfaces[J];;1995-02
Similar Journals
 > Mechanical Engineer > Chinese Journal of Mechanical Engineering > Machine Design & Research > Automobile Technology > Journal of Harbin University of Science and Technology > Modern Machinery > Journal of Shandong University of Science and Technology(Natural Science) > Journal of Tianjin University > Aviation Precision Manufacturing Technology > Manufacturing Technology & Machine Tool