Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Auto Mobile Science & Technology》 2012-01
Add to Favorite Get Latest Update

The Finite Element Analysis and Structural Improvement Design of the Hub of Rubber Torsional Damper

WU Chang-bin,XIAO Zu-yu,GAN Xin-gang,TANG Zhao-xia,LIU Ding-bang(Hubei GuangAo vibration absorber Co.Ltd.,Shiyan 442002,China)  
The stress distribution of the hub was calculated using the finite element software Abaqus.Then the fatigue life of the hub was estimated according to the material's P-S-N curves.On this basis,a structural improvement design of the hub was made,which resulted to a significantly reduction of the hub's maximum stress.
【CateGory Index】: U463.335.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 Lü Zhenhua Feng Zhendong (Jilin University of Technology);An Investigation of Design Method of the Damped Torsional Vibration Absorber of Automotive Engine Crankshaft with an Application[J];Chinese Internal Combustion Engine Engineering;1992-03
2 Shangguan Wenbin1,2,Niu Lizhi1 & Huang Xing1 1.Ningbo Tuopu Vibration Isolation Co.,Ltd.,Ningbo 315800;2.College of Automotive Engineering,South China University of Technology,Guangzhou 510641;Design of Multi-rubber-element Torsional Vibration Dampers for Engine Crankshaft[J];Automotive Engineering;2007-11
Chinese Journal Full-text Database 10 Hits
1 JIN Guo-long1,XIE Xiong-yao1,WANG Ru-lu2(1.Key Laboratory of Geotechnical Engineering,Department of Geotechnical Engineering,Tongji University,Shanghai 200092;2.Shanghai Metro Operation Co.,Ltd,Shanghai 200003);Lifetime Prediction of the Bogie Frame of Shanghai Metro Line 1 by 3D FEM[J];Chinese Journal of Underground Space and Engineering;2009-05
2 ZHANG Jing-zhu1,CUI Qing-bin2,XU Cheng1(1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu,China;2.Wuhan Mechanical Technology College,Wuhan 430075,Hubei,China);Fatigue Life Prediction of Transmission Gear Based on Cooperation Simulation Technology[J];Acta Armamentarii;2007-12
3 GAO Jian-feng,NA Jing-xin,YAN Ya-kun(State Key Laboratory of Automotive Dynamic Simulation,Jilin University,Changchun 130025);Fatigue Performance of the Weld Spacing of Coach Framework Joints[J];Journal of Beijing University of Technology;2012-05
4 Wang Zheng(National Key Laboratory of Diesel Engine Turbocharging Technology,China North Engine Research Institute,Datong 037036,China);Time-dependent reliability models of components with rotatory-symmetrical structure[J];Journal of Beijing University of Aeronautics and Astronautics;2012-06
5 Li Xianfeng1,Yang Jianwei2,Jia Zhixuan1(1.School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024; 2.School of Mechanical-Electronic and Automobile Engineering,BUCEA Beijing 100044);Fatigue Analysis for Spring Plate of Vehicle Shock Absorber Based on Workbench[J];Journal of Beijing University of Civil Engineering and Architecture;2012-02
6 CHEN De-min~(1,2),LI Xue-yuan~1,HU Ji-bin~1,YUAN Shi-hua~1(1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Department of Mechanical Engineering,Academy of Armored Forces Engineering College,Beijing 100072,China);Fracture of Shifting-Yoke in the Gear-Box for a Wheeled Chariot Based on Miner's Accumulated Damage Theory[J];Transactions of Beijing Institute of Technology;2006-10
7 Meng Bo Dai JingJun Mu Qing(Department of Mechanical Engineering,Beijing Institute of Petro-chemical Technology,Beijing 102617,China);Quantitative Analysis of the Effect of Initial Defects on Bearing Fatigue Performance[J];Journal of Beijing Institute of Petro-Chemical Technology;2010-02
8 JIANG Nian-zhao,XIE Qin-wei,DAI Yong,ZHANG Zhi-qing(Nanjing Research Institute on Simulation Technique,Nanjing 210016,China);THE FATIGUE ANALYSIS OF UAV COMPOSITE WING BASED ON ANSYS/FE-SAFE[J];Fiber Reinforced Plastics/Composites;2009-06
9 SHI Xing-can,ZHAO Mei-ying(College of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,China);TWO-STAGE LOADING FATIGUE LIFE PREDICTION OF COMPOSITE LAMINATE[J];Fiber Reinforced Plastics/Composites;2010-01
10 LU Mei(College of Mechanical and Electric Engineering,Changchun University of Science and Technology,Changchun 130022,China);Fatigue analysis of parking brake handle[J];Journal of Changchun University;2010-12
China Proceedings of conference Full-text Database 10 Hits
1 Hu Lei,Wang Ke (State Key Lab of Mechanics and Control for Mechanical Structures,Nanjing University of Aeronautics and Astronautics Nanjing,210016,China);The random vibration fatigue life analysis of a certain cowling trestle[A];[C];2011
2 HU Jianan 1 CHENG Kai 2 YOU Xiaochuan 1 PENG Zeying 2 ZHUANG Zhuo 1 1Department of Solid Mechanics,School of Aerospace,Tsinghua University,Beijing,100084,China 2Shanghai Electric Power Generation Technology R&D Center,Shanghai,200241,China;THE RESEARCH OF LONG STEAM TURBINE BLADE ON LOW CYCLE FATIGUE CHRACTERISTIC[A];[C];2010
3 HU Ying-hui,YOU Xiao-chuan,ZHUANG Zhuo(School of Aerospace,Tsinghua University,Beijing 100084,China);Life Evaluation for a Pressure Vessel under Alternating Inner Pressure and Temperature[A];[C];2010
4 CHEN Zhong-bing~(1,2) LI Guo-qing~2 ZHANG Hui~2 CHEN Chuan-yao~2 (1.Suzhou Nuclear Power Research Institute,Suzhou 215004,China;2.Department of Mechanics,Huazhong University of Science and Technology,Wuhan 430074,China);Low Cyclic Fatigue Life Study for the Intermediate Pressure Main Steam Valve Housing in the Power Station[A];[C];2007
5 ZHANG Jun LI Wei CHEN Guo-hao (The First Engineers Scientific Institute of the General Armaments Department,Wuxi 214035,China);Forecast for Elastic Failure of Steel Bridge and Pontoon Structures with the Method of Surveilling Strain[A];[C];2007
6 CHEN Yu-zhen,WEI Zhong-liang (Nanjing Research Institute of Electronics Technology,Nanjing 210039,China);Influence Factor Analysis of Gear Fatigue Based on Co-simulation[A];[C];2011
7 TAN Lian-fei,WANG Qing-yuan~*,PENG Ze-wei (School of Architecture and Environment,Sichuan Univ.,Chengdu 610065,China);Analysis of Stress Concentration on Beams with Corrugated Steel Webs[A];[C];2010
8 Xiong Zhi-xin,Tong Fu-shan,Feng Liang (College of Shipbuilding Engineering,Harbin Engineering University,Harbin 150001);Strain-fatigue Life Analyses Based on Derivative Proportional Law of Material[A];[C];2010
9 Li Baozhu Zhang Zheng Beijing University of Aeronautics and Astronautics,Beijing 100191,China;Fatigue life prediction and structure optimization of multi-rivet structures[A];[C];2010
10 WANG Dong-feng, WANG Ding-Jiang, WANG Xin-kun ( The First Aeronautic Institute of Air Force, Xinyang 464000, China) ( Beijing Aeronautical Technology Research Center, Beijing 100076, China);Correction of p -S -N Curve in Estimating Part's Safe Fatigue Life[A];[C];2006
Chinese Journal Full-text Database 10 Hits
1 WU Yi1,RUAN Jing-lan1,WU Wei-wei2(1.Henan University of Technology,Zhengzhou 450052,China;2.Wuhan University,Wuhan 430072,China);Comprehensive Optimization Analysis of Working Parameters for Rubber Roll Husker Based on Multi-index Orthogonal Experimental Design[J];Packaging and Food Machinery;2012-03
2 WANG Hong-yun1,2,CAI Rui-bin1,SHANG GUAN Wen-bin1(1.College of Automotive Engineering,South China University of Technology,Guangzhou 510641,China;2.Deparment of Electronic Information Engineering,Guangdong Polytechnic Normal University,Guangzhou 510665,China);The Optimum Design of the Two-staged Parallel Rubber Torsional Damper for Engine Crankshaft[J];Vehicle Engine;2007-05
3 Xiaoling Hu;Xiu Liu;Ming Li;Wenbo Luo;College of Civil Engineering and Mechanics,Xiangtan University;Institute of Rheology,Xiangtan University;;3D FINITE ELEMENT MODELING OF THE HYPERELASTIC MECHANICAL BEHAVIOR OF CB-FILLED RUBBER[J];Chinese Journal of Solid Mechanics;2013-S1
4 Tian Zhongxu;Qi Ping;Deng Kangyao;Cui Yi;Key Laboratory for Power Machinery and Engineering of Ministry of Education,Shanghai Jiao Tong University;China North Engine Research Institute;;Modeling for Torsional Stiffness of Rubber Dampers[J];Diesel Engine;2014-02
5 LUO Wei-lan, YANG Xun-nian, ZHENG Jian-min(Institute of Computer Graphics and Image Processing, Zhejiang University, Hangzhou 310027, China);B-spline curve fairing with constraints.[J];Journal of Zhejiang University(Sciences Edition);2004-01
6 CAI Zi-Xing JIANG Zhong-Yang WANG Yong LUO Yi-Dan(School of Information Science and Engineering,Central South University,Changsha 410083);A Novel Constrained Optimization Evolutionary Algorithm Based on Orthogonal Experimental Design[J];Chinese Journal of Computers;2010-05
7 WANG Jun(School of Information and Automotive Engineering,Guangzhou City Polytechnic,Guangzhou 510405,China);Design method and experimental analysis of silicon oil-rubber damped torsional vibration absorber[J];Machinery Design & Manufacture;2012-05
8 WU Zhen-feng,ZHU Li(School of Mechatronic Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China);Classifications of spatial surface continuity and their mathematic explanation[J];Journal of Machine Design;2011-02
9 YANG Guan-ci1,2,LI Shao-bo1,2,TANG Xiang-hong1,QU Jing-lei1,ZHONG Yong2(1.Key Laboratory of Advanced Manufacturing Technology(Guizhou University),Ministry of Education,Guiyang Guizhou 550003,China; 2.Chengdu Institute of Computer Application,Chinese Academy of Sciences,Chengdu Sichuan 610041,China);Control strategy parameter analysis of parallel hybrid electric vehicles based on multiindex orthogonal experiment[J];Journal of Computer Applications;2012-11
10 Song Feifei;Yang He;Li Heng;Zhan Mei;Li Guangjun;State Key Laboratory of Solidifcation Processing,School of Materials Science and Engineering,Northwestern Polytechnical University;Chengdu Aircraft Industry (Group) Corporation Ltd.;;Springback prediction of thick-walled high-strength titanium tube bending[J];中国航空学报(英文版);2013-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved