Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Qingdao University of Science and Technology(Natural Science Edition)》 2009-03
Add to Favorite Get Latest Update

Fatigue Analysis of the New Stirring Kneader Shafts Based on the Finite Element Method

FAN Zhi-min,XU An-jun,XU jun(College of Electromechanical Engineering,Qingdao University of Science and Technology,Qingdao 266061,China)  
The finite element model of the stirring kneader shaft was built based on finite element method.Then the ANSYS software was adopted for the static strength analysis of the stirring kneader shaft,and the dangerous points were found.Using these data,a finite element fatigue analysis was performed by ANSYS-Fatigue module.The results showed that:the cumulative fatigue damage coefficient is 0.6,and the new stirring kneader shaft is able to meet fatigue requirement during the whole service life.
【CateGory Index】: TQ051.7
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 Zhang Wen-qiang,Ju Li-juan,Wu Guang-qiang(Automotive college of Tongji university,Shanghai 201804,China);Stress analysis and fatigue life calculation of transmission shaft based on FEM[J];Mechanical Research & Application;2007-06
2 FAN Zhi-min,SUN Wei-guang,HU Li-ping(College of Electromechanical Engineering,Qingdao University ofScience and Technology,Qingdao 266061,China);The Finite Element Analysis of the Intensity of the New Stirring Kneader Shafts[J];Journal of Qingdao University of Science and Technology(Natural Science Edition);2006-04
Chinese Journal Full-text Database 10 Hits
1 JIN Guo-long1,XIE Xiong-yao1,WANG Ru-lu2(1.Key Laboratory of Geotechnical Engineering,Department of Geotechnical Engineering,Tongji University,Shanghai 200092;2.Shanghai Metro Operation Co.,Ltd,Shanghai 200003);Lifetime Prediction of the Bogie Frame of Shanghai Metro Line 1 by 3D FEM[J];Chinese Journal of Underground Space and Engineering;2009-05
2 ZHANG Jing-zhu1,CUI Qing-bin2,XU Cheng1(1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu,China;2.Wuhan Mechanical Technology College,Wuhan 430075,Hubei,China);Fatigue Life Prediction of Transmission Gear Based on Cooperation Simulation Technology[J];Acta Armamentarii;2007-12
3 GAO Jian-feng,NA Jing-xin,YAN Ya-kun(State Key Laboratory of Automotive Dynamic Simulation,Jilin University,Changchun 130025);Fatigue Performance of the Weld Spacing of Coach Framework Joints[J];Journal of Beijing University of Technology;2012-05
4 Wang Zheng(National Key Laboratory of Diesel Engine Turbocharging Technology,China North Engine Research Institute,Datong 037036,China);Time-dependent reliability models of components with rotatory-symmetrical structure[J];Journal of Beijing University of Aeronautics and Astronautics;2012-06
5 Li Xianfeng1,Yang Jianwei2,Jia Zhixuan1(1.School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024; 2.School of Mechanical-Electronic and Automobile Engineering,BUCEA Beijing 100044);Fatigue Analysis for Spring Plate of Vehicle Shock Absorber Based on Workbench[J];Journal of Beijing University of Civil Engineering and Architecture;2012-02
6 CHEN De-min~(1,2),LI Xue-yuan~1,HU Ji-bin~1,YUAN Shi-hua~1(1.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Department of Mechanical Engineering,Academy of Armored Forces Engineering College,Beijing 100072,China);Fracture of Shifting-Yoke in the Gear-Box for a Wheeled Chariot Based on Miner's Accumulated Damage Theory[J];Transactions of Beijing Institute of Technology;2006-10
7 Meng Bo Dai JingJun Mu Qing(Department of Mechanical Engineering,Beijing Institute of Petro-chemical Technology,Beijing 102617,China);Quantitative Analysis of the Effect of Initial Defects on Bearing Fatigue Performance[J];Journal of Beijing Institute of Petro-Chemical Technology;2010-02
8 JIANG Nian-zhao,XIE Qin-wei,DAI Yong,ZHANG Zhi-qing(Nanjing Research Institute on Simulation Technique,Nanjing 210016,China);THE FATIGUE ANALYSIS OF UAV COMPOSITE WING BASED ON ANSYS/FE-SAFE[J];Fiber Reinforced Plastics/Composites;2009-06
9 SHI Xing-can,ZHAO Mei-ying(College of Aeronautics,Northwestern Polytechnical University,Xi'an 710072,China);TWO-STAGE LOADING FATIGUE LIFE PREDICTION OF COMPOSITE LAMINATE[J];Fiber Reinforced Plastics/Composites;2010-01
10 LU Mei(College of Mechanical and Electric Engineering,Changchun University of Science and Technology,Changchun 130022,China);Fatigue analysis of parking brake handle[J];Journal of Changchun University;2010-12
China Proceedings of conference Full-text Database 10 Hits
1 Hu Lei,Wang Ke (State Key Lab of Mechanics and Control for Mechanical Structures,Nanjing University of Aeronautics and Astronautics Nanjing,210016,China);The random vibration fatigue life analysis of a certain cowling trestle[A];[C];2011
2 HU Jianan 1 CHENG Kai 2 YOU Xiaochuan 1 PENG Zeying 2 ZHUANG Zhuo 1 1Department of Solid Mechanics,School of Aerospace,Tsinghua University,Beijing,100084,China 2Shanghai Electric Power Generation Technology R&D Center,Shanghai,200241,China;THE RESEARCH OF LONG STEAM TURBINE BLADE ON LOW CYCLE FATIGUE CHRACTERISTIC[A];[C];2010
3 HU Ying-hui,YOU Xiao-chuan,ZHUANG Zhuo(School of Aerospace,Tsinghua University,Beijing 100084,China);Life Evaluation for a Pressure Vessel under Alternating Inner Pressure and Temperature[A];[C];2010
4 CHEN Zhong-bing~(1,2) LI Guo-qing~2 ZHANG Hui~2 CHEN Chuan-yao~2 (1.Suzhou Nuclear Power Research Institute,Suzhou 215004,China;2.Department of Mechanics,Huazhong University of Science and Technology,Wuhan 430074,China);Low Cyclic Fatigue Life Study for the Intermediate Pressure Main Steam Valve Housing in the Power Station[A];[C];2007
5 ZHANG Jun LI Wei CHEN Guo-hao (The First Engineers Scientific Institute of the General Armaments Department,Wuxi 214035,China);Forecast for Elastic Failure of Steel Bridge and Pontoon Structures with the Method of Surveilling Strain[A];[C];2007
6 CHEN Yu-zhen,WEI Zhong-liang (Nanjing Research Institute of Electronics Technology,Nanjing 210039,China);Influence Factor Analysis of Gear Fatigue Based on Co-simulation[A];[C];2011
7 TAN Lian-fei,WANG Qing-yuan~*,PENG Ze-wei (School of Architecture and Environment,Sichuan Univ.,Chengdu 610065,China);Analysis of Stress Concentration on Beams with Corrugated Steel Webs[A];[C];2010
8 Xiong Zhi-xin,Tong Fu-shan,Feng Liang (College of Shipbuilding Engineering,Harbin Engineering University,Harbin 150001);Strain-fatigue Life Analyses Based on Derivative Proportional Law of Material[A];[C];2010
9 Li Baozhu Zhang Zheng Beijing University of Aeronautics and Astronautics,Beijing 100191,China;Fatigue life prediction and structure optimization of multi-rivet structures[A];[C];2010
10 WANG Dong-feng, WANG Ding-Jiang, WANG Xin-kun ( The First Aeronautic Institute of Air Force, Xinyang 464000, China) ( Beijing Aeronautical Technology Research Center, Beijing 100076, China);Correction of p -S -N Curve in Estimating Part's Safe Fatigue Life[A];[C];2006
Chinese Journal Full-text Database 10 Hits
1 Huang Burning(Shunde Qinchuan Henli Plastic Machinery Co. Ltd. , Shunde 528300, China)Xu Zhongbin (School of Industrial Equipment and Control Engineering, South China University of Technology , Guangzhou 510641 , China);TECHNICAL ADVANCE AND DEVELOPING TREND OF HIGH SPEED ULTRA-PRECISION INJECTION MACHINE[J];Engineering Plastics Application;2002-12
2 ZHANG Feng-xiang, ZHU Jian-jun (Department of Mechnical and Electrical Studies,Liawu Vocational College,Lianwu 271100,China);Study on the Impact Problem of Freely Falling Objects[J];Journal of Anhui TV University;2003-03
3 HOU Yue-qian~1,DONG Qi-shun~2(1.Mechanical Engineering College,Changchun University,Changchun 130022,China;2.Mechanical & Electronic Engineering College,Changchun University of Science and Technology,Changchun 130022,China);A study of modeling of the test machine system[J];Journal of Changchun University;2005-02
4 LI Changjiang, LU Ping, WEI Leilei(Shandong University, Jinan 250061, Shandong China);3D Modeling & Examination Simulation of Large Complicated Structural Component[J];;2004-06
5 PAN Zi-yong,HU hai-jian2,ZHOU Xiao-jun1 (1.Xining electric power corporation, Xining 810005,China; 2.Qinghai Electric Power Corporation,Xining 810008,China);Analysis for the Utimate Bearing Capacity of the Transmission Tower[J];Construction & Design for Project;2009-11
6 ;Study of the Optimal Design of the Double Arm link Clamping Mechanism for Plastic Injection Machines[J];KONSTRUKTION ENGINEERING DESIGN;1996-03
7 ZHANG Yuan-cheng,XUE Zhi-yong(Jiangsu Union Technical Institute,Lianyungang,222000,China);Mechanical Properties Analysis of CT61100 Lathe Spindle by ANSYS[J];Chinese Agricultural Mechanization;2010-02
8 Han Minglan Wang Yan(Qingdao Technological University,Qingdao,266033,China);ELEMENT STIFFNESS MATRIX AND INTERNAL FORCE ANALYSIS OF BEAM WITH REDUCED BEAM SECTION CONNECTION IN STEEL FRAMES[J];Industrial Construction;2011-01
9 Zuo Kongtian Wang Shuting Zhang Yunqin Chen Liping Doctoral Candidate; College of Mechanical Science and Engineering, Huazhong Univ. of Sci. & Tech., Wuhan 430074, China.;Two types of algorithms used in topology optimization[J];Journal of Huazhong University of Science and Technology;2004-09
10 GAO Zhifeng,CHEN Daojiong,SHI Xiangsheng(College of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China);Design of Mechanisms by Virtual Prototyping Technology[J];Machine Tool & Hydraulics;2008-01
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 ZUO Yajun,ZHAO Yixiang,CHEN Xindu(Guangdong Provincial Key Laboratory of Computer Integrated Manufacturing System,School of Electromechanical Engineering,Guangdong University of Technology,Guangzhou Guangdong 510006,China);Optimization Design on Clamping System of Injection Machine Based on ANSYS and Orthogonal Design[J];Machine Tool & Hydraulics;2012-21
2 YUE Qinyang;ZHOU Hongwei;LIN Wu;Tederic Machinery Co,Ltd;;Analysis on Clamping Mechanism of Large Injection Molding Machines[J];China Plastics;2013-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved