Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Light Alloy Fabrication Technology》 2008-10
Add to Favorite Get Latest Update

Effect of particle geometrical characteristic on mechanical behavior of SiC particle reinforced aluminum matrix composites

QIANG Hua1,XU Zun-ping2(1.Schoole of yucai,Southwest University,Chongqing 400715,China;2.Schoole of Material Science andEngineering,Southwest University,Chongqing 400715,China)  
A two-dimension of finite element model(FEM) was used to analyze the effect of particle with different shape and different size under different load on mechanical behavior of SiC particle reinforced aluminum composites.The results showed that the particle shape has great effect on stress and strain of composites.There are serious stress concentration in the particle corner and strain concentration in the matrix along the load.The stress and strain increase quickly with decreasing particle corner degree and with increasing the load.The particle size has little effect on stress of particle.
【CateGory Index】: TB333
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 2 Hits
1 Wang Aiqin,Ni Zenglei,Xie Jingpei(College of Material Science and Engineering,He'nan University of Science and Technology, Luoyang He'nan 471003,China);Effects of particle size and its distribution homogenization on the microstructure and mechanical properties of SiC/Al-30Si alloy composite[J];Powder Metallurgy Technology;2013-01
2 SUN Chao,SHEN Ru-juan,SONG Min (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Simulation of mechanical behaviors of SiC reinforced Al matrix composites by finite element method[J];The Chinese Journal of Nonferrous Metals;2012-02
【Citations】
Chinese Journal Full-text Database 1 Hits
1 LI Xia,CHEN Kang-hua,HUANG Da-wei(State Key Laboratory for Powder Metallurgy,Central South University,Changsha 410083,China);Influence of Reinforced Particle on Strength of Particle-reinforced Aluminum Matrix Composites[J];Aluminium Fabrication;2006-02
【Co-citations】
Chinese Journal Full-text Database 6 Hits
1 ZHANG Zhongming1,2,HU Bo1,GAO Fengtao1,WANG Jincheng2(1.School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China;2.State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi'an 710072,China);Room-temperature damping capacity of Al_2O_(3P)/Al composites prepared by reciprocating extrusion[J];Acta Materiae Compositae Sinica;2011-04
2 LI Wei,CHEN Jian,HE Jian-jun,QIU Wei,REN Yan-jie(School of Energy and Power Engineering,Changsha University of Science and Technology,Changsha 410076,China);Effects of Particle Diameter on Microstructure and Tensile Properties of SiC Particle Reinforced Al-Si Alloy Composites by Spray Deposition[J];Materials for Mechanical Engineering;2013-04
3 YANG Zhi-yong,HAN Jian-min,LI Wei-jing,WANG Jin-hua(School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,Beijing 100044,China);Research on Meso-Scale Damage Fracture and Series-to-Parallel Failure Model for SiCp/A356 Composites[J];Journal of Aeronautical Materials;2008-02
4 XU Jin-cheng1,DENG Xiao-yan1,2,ZHANG Cheng-liang1,AI Li-jun1,TIAN Liang-liang1(1.Institute of Material Science and Engineering,School of Physical Science and Technology,Lanzhou University,Lanzhou Gansu 730000,China;2.Institute of Electron Material,North-West National University,Lanzhou Gansu 730030,China);Effects of heat treatment on mechanical properties of Al-Cu-Mg based composites reinforced by SiC particle[J];Heat Treatment of Metals;2009-01
5 SONG Min, XIE Can-qiang, HE Yue-hui (State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China);Model of effects of particle failure on yield stress of SiC reinforced aluminum alloy composites[J];The Chinese Journal of Nonferrous Metals;2010-02
6 LIU Zhi-hui1,LIU Ya-nan1,YANG Wei-min2,WANG Juan1,ZHANG Shu1 (1.Research Institute of Engineering and Technology,Yunnan University,Kunming 650091,China; 2.Institute of Physics and Electronics,Yunnan Normal University,Kunming 650091,China);Research Progress of Fracture Toughness of SiCp/Al composites[J];Journal of Yunnan Normal University(Natural Sciences Edition);2013-03
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 WANG Wen - ming;PAN Fu - sheng;LU Yun;ZENG Su - min College of Materials Science and Engineering, Chongqing University,Chongqing 400044,China Faculty of Engineering,Chiba University,Chiba,Japan Southwest Aluminum Industry(Group) Company,Chongqing 401326, China;Current status of development and application in SiCp/Al composites[J];Ordnance Material Science and Engineering;2004-03
2 SONG Guang sen 1, HAN Jian min 2, LI Wei jing 2, WANG Jin hua 2 (1.Department of 211 Project Management; 2.College of Mechanical and Electronic Control Engineering,Northern Jiaotong University, Beijing 100044,China);Discussion of Material Selection for High-Speed Trains in China[J];Journal of Northern Jiaotong University;2002-04
3 LI Ming-wei, HAN Jian-min, LI Wei-jing, CUI Shi-hai, WANG Jin-hua (School of Mechanical and Electronic Control Engineering,Beijing Jiaotong University, Beijing 100044,China);Abstraction Research on Porosity of SiC_p/ZL101 Composites by Stirring Cast[J];Journal of Northern Jiaotong University;2004-01
4 WU Zhao-ling,HAN Jian-min,LI Wei-jing,WANG Jin-hua (School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,Beijing 100044,China);Quality and Control of SiC_p/A356 Composites[J];Journal of Beijing Jiaotong University;2006-01
5 Lü Yizhong(Beijing Vocational & Technical Institute of Industry,Beijing 100042,China);Application of Aluminum Base Composite Material in Traffic Conveyance[J];Journal of Beijing Vocational & Technical Institute of Industry;2006-01
6 ;Current Status and Development of Metal-Matrix Composites by Spray Deposition[J];Materials Review;1995-02
7 ZHAN Meiyan CHEN Zhenghua (School of Materials Science and Engineering,Hunan University,Changsha 410082,China);Research on Strengthening and Fracture Mechanism of SiC Particle Reinforced Al Matrix Composites[J];Materials Review;2004-01
8 CUI Yan (Institute of Aeronautical Materials, Beijing 100095, China);Aerospace Applications of Silicon Carbide Particulate Reinforced Aluminium Matrix Composites[J];Journal of Materials Engineering;2002-06
9 Xie Guohong(Shanghai Jiao Tong University);Research and Development of Fabrieation Particulates Rciforced Aluminium Composites, by Stir-casting Process[J];JOURNAL OF MATERIALS ENGINEERING;1994-12
10 JIANG Long-tao, WU Gao-hui, SUN Dong-li(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China);Strengthening behavior of AlN particles in different aluminum alloys[J];Material Science and Technology;2001-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved